diff options
| author | Daniel Silverstone <dsilvers@simtec.co.uk> | 2009-03-13 13:53:46 +0000 |
|---|---|---|
| committer | Ben Dooks <ben-linux@fluff.org> | 2009-04-07 10:18:33 +0100 |
| commit | c564e6ae6c5aa6e3995ff87ed4a32b4788ad5109 (patch) | |
| tree | b773106104d9897d945709d3bff8a56ff6586da8 /arch/arm/mach-s3c2410 | |
| parent | a192f7153bb33151f83440cd9c0442233a064bf1 (diff) | |
i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.
This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'arch/arm/mach-s3c2410')
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-bast.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-n30.c | 3 |
2 files changed, 2 insertions, 4 deletions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 01bd76725b9..4389c160f7d 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -409,8 +409,7 @@ static struct platform_device bast_sio = { static struct s3c2410_platform_i2c __initdata bast_i2c_info = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 130*1000, + .frequency = 100*1000, }; /* Asix AX88796 10/100 ethernet controller */ diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 05a5e877b49..2b83f870771 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -340,8 +340,7 @@ static struct platform_device *n35_devices[] __initdata = { static struct s3c2410_platform_i2c n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 10*1000, - .max_freq = 10*1000, + .frequency = 10*1000, }; /* Lots of hardcoded stuff, but it sets up the hardware in a useful |