Merge branch 'next-s3c64xx' into next-merged

3 files changed, 20 insertions, 76 deletions

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 23c470c2e5b..918e3463297 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)		S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA	   (0x4B000000)
 #define S3C24XX_SZ_DMA	   SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD	   (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC	   (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -158,21 +98,9 @@
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C_PA_UART	    S3C24XX_PA_UART
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h
new file mode 100644
index 00000000000..544da41979d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - timer tick support
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index ab39491beee..c9432103750 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,3 +1,4 @@
+
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics