Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...

73 files changed, 377 insertions, 503 deletions

diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 4cb069fd9af..ccdac4b6a46 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par)
 {
 	int i;
 
-	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
 
 	for (i = 0; i < ARRAY_SIZE(gpios); i++)
 		gpio_free(gpios[i]);
@@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info)
 {
 	int ret;
 
-	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
 				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
 				"AM200", info->par);
 	if (ret)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index fa8bad235d9..76c4b949403 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par)
 {
 	int i;
 
-	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
 
 	for (i = 0; i < ARRAY_SIZE(gpios); i++)
 		gpio_free(gpios[i]);
@@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info)
 	int ret;
 	struct broadsheetfb_par *par = info->par;
 
-	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
 				IRQF_DISABLED|IRQF_TRIGGER_RISING,
 				"AM300", par);
 	if (ret)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index a34de9a0d5e..c35456f02ac 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -180,7 +180,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = {
 };
 
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
 };
 
 
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index c2f0be040d2..c91727d1fe0 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = {
 	       .flags = IORESOURCE_MEM
 	},
 	[2] = {
-	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
 	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
 	}
 };
@@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void)
 static struct plat_serial8250_port ti16c752_platform_data[] = {
 	[0] = {
 	       .mapbase = 0x14000000,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[1] = {
 	       .mapbase = 0x14000040,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[2] = {
 	       .mapbase = 0x14000080,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
 	},
 	[3] = {
 	       .mapbase = 0x140000c0,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a70539..431ef56700c 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -33,7 +33,7 @@
 /* GPIO IRQ usage */
 #define GPIO83_MMC_IRQ		(83)
 
-#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
 
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
@@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = {
 		.modalias		= "libertas_spi",
 		.max_speed_hz		= 13000000,
 		.bus_num		= 2,
-		.irq			= gpio_to_irq(95),
+		.irq			= PXA_GPIO_TO_IRQ(95),
 		.chip_select		= 0,
 		.controller_data	= &cm_x270_libertas_chip,
 		.platform_data		= &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index ec170a552c2..8fa4ad27edf 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -58,8 +58,8 @@ extern void cmx270_init(void);
 #define CMX255_GPIO_IT8152_IRQ	(0)
 #define CMX270_GPIO_IT8152_IRQ	(22)
 
-#define CMX255_ETHIRQ		IRQ_GPIO(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX255_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource cmx255_dm9000_resource[] = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 7236974da0b..4b981b82d2a 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -64,7 +64,7 @@
 #define GPIO82_MMC_IRQ		(82)
 #define GPIO85_MMC_WP		(85)
 
-#define	CM_X300_MMC_IRQ		IRQ_GPIO(GPIO82_MMC_IRQ)
+#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS		(95)
 #define GPIO96_RTC_WR		(96)
@@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 6a685165c9f..29d5d541f60 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -218,8 +218,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
@@ -249,7 +249,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
 };
 
 static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
 };
 
 static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c01059a61f3..0846d210cb0 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 5028f2300d5..6ad3359063a 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 9d4dc5970b9..66600f05e43 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.chip_select	= 0,
 		.platform_data	= &corgi_ads7846_info,
 		.controller_data= &corgi_ads7846_chip,
-		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
 	}, {
 		.modalias	= "corgi-lcd",
 		.max_speed_hz	= 50000,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 29034778bfd..39e265cfc86 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
@@ -40,7 +41,9 @@ static struct gpio charger_gpios[] = {
 	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
 	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
 	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
 	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
+	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
 };
 
 static void corgi_charger_init(void)
@@ -90,7 +93,12 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
 {
 	int is_resume = 0;
 
-	dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
+	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
+		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
+		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
+		gpio_get_value(CORGI_GPIO_CHRG_FULL),
+		gpio_get_value(CORGI_GPIO_KEY_INT),
+		gpio_get_value(CORGI_GPIO_WAKEUP));
 
 	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
 		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
@@ -124,14 +132,21 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
 
 static unsigned long corgi_charger_wakeup(void)
 {
-	return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
+	unsigned long ret;
+
+	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
+		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
+		<< GPIO_bit(CORGI_GPIO_KEY_INT))
+		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
+		<< GPIO_bit(CORGI_GPIO_WAKEUP));
+	return ret;
 }
 
 unsigned long corgipm_read_devdata(int type)
 {
 	switch(type) {
 	case SHARPSL_STATUS_ACIN:
-		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+		return !gpio_get_value(CORGI_GPIO_AC_IN);
 	case SHARPSL_STATUS_LOCK:
 		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 2e0425404de..18fd177073f 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -415,9 +415,29 @@ static struct resource pxa_rtc_resources[] = {
 	},
 };
 
+static struct resource sa1100_rtc_resources[] = {
+	[0] = {
+		.start  = 0x40900000,
+		.end	= 0x409000ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sa1100_rtc_resources),
+	.resource       = sa1100_rtc_resources,
 };
 
 struct platform_device pxa_device_rtc = {
@@ -1051,6 +1071,36 @@ struct platform_device pxa3xx_device_ssp4 = {
 };
 #endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
 
+struct resource pxa_resource_gpio[] = {
+	{
+		.start	= 0x40e00000,
+		.end	= 0x40e0ffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GPIO0,
+		.end	= IRQ_GPIO0,
+		.name	= "gpio0",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO1,
+		.end	= IRQ_GPIO1,
+		.name	= "gpio1",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO_2_x,
+		.end	= IRQ_GPIO_2_x,
+		.name	= "gpio_mux",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
 void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2fd5a8b3575..1475db10725 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp;
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
+extern struct platform_device pxa_device_gpio;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bd396ba67af..d80c0ba9a09 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -70,7 +70,7 @@
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
 #define GPIO41_ETHIRQ		(41)
-#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
 #define GPIO9_USB_VBUS_EN	(9)
@@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = {
 		.modalias		= "libertas_spi",
 		.max_speed_hz		= 13000000,
 		.bus_num		= 2,
-		.irq			= IRQ_GPIO(116),
+		.irq			= PXA_GPIO_TO_IRQ(116),
 		.chip_select		= 0,
 		.controller_data	= &em_x270_libertas_chip,
 		.platform_data		= &em_x270_libertas_pdata,
@@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = {
 
 static struct i2c_board_info em_x270_i2c_pmic_info = {
 	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_GPIO(0),
+	.irq = PXA_GPIO_TO_IRQ(0),
 	.plat