Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

50 files changed, 2503 insertions, 605 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee92182749..38fbd0a0e40 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -115,6 +115,11 @@ config MACH_CM_X300
 	select CPU_PXA310
 	select HAVE_PWM
 
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
 	select PXA25x
@@ -417,6 +422,24 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select PXA3xx
+	select CPU_PXA300
+	select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select PXA3xx
+	select CPU_PXA300
+	select PXA_SSP
+
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_SCOOP
@@ -435,6 +458,7 @@ config SHARPSL_PM
 config CORGI_SSP_DEPRECATED
 	bool
 	select PXA_SSP
+	select PXA_SSP_LEGACY
 	help
 	  This option will include corgi_ssp.c and corgi_lcd.c
 	  that corgi_ts.c and other legacy drivers (corgi_bl.c
@@ -446,6 +470,7 @@ config MACH_POODLE
 	select PXA25x
 	select SHARP_LOCOMO
 	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +517,11 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -629,6 +659,11 @@ config PXA_SSP
 	help
 	  Enable support for PXA2xx SSP ports
 
+config PXA_SSP_LEGACY
+	bool
+	help
+	  Support of legacy SSP API
+
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda7e6f..86bc87b7f2d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
 endif
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
@@ -82,6 +83,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
+obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -89,6 +91,9 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07ca938..f3b5ace815e 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@ static void __init balloon3_init_irq(void)
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
+static unsigned long balloon3_ac97_pin_config[] = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+};
+
 static void balloon3_backlight_power(int on)
 {
 	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@ static void balloon3_backlight_power(int on)
 
 static unsigned long balloon3_lcd_pin_config[] = {
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	GPIO99_GPIO,		/* Backlight */
 };
@@ -311,8 +300,10 @@ static void __init balloon3_init(void)
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 		pxa_set_ac97_info(NULL);
+	}
 
 	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 00000000000..aae544631a8
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+	[0] = {
+	       .start = 0x11000020,
+	       .end = 0x1100003f,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = 0x1100001c,
+	       .end = 0x1100001c,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+	}
+};
+
+static struct platform_device capc7117_ide_device = {
+	.name = "pata_platform",
+	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
+	.resource = capc7117_ide_resources,
+	.dev = {
+		.platform_data = &pata_platform_data,
+		.coherent_dma_mask = ~0		/* grumble */
+	}
+};
+
+static void __init capc7117_ide_init(void)
+{
+	platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
+					UPF_IOREMAP | \
+					UPF_BUGGY_UART | \
+					UPF_SKIP_TEST)
+#define	TI16C752_UARTCLK	(22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+	[0] = {
+	       .mapbase = 0x14000000,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[1] = {
+	       .mapbase = 0x14000040,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[2] = {
+	       .mapbase = 0x14000080,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[3] = {
+	       .mapbase = 0x140000c0,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[4] = {
+	       /* end of array */
+	}
+};
+
+static struct platform_device ti16c752_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = ti16c752_platform_data
+	}
+};
+
+static void __init capc7117_uarts_init(void)
+{
+	platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+	/* Init CoM */
+	mxm_8x10_barebones_init();
+
+	/* Init evaluation board peripherals */
+	mxm_8x10_ac97_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	capc7117_uarts_init();
+	capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+	.phys_io = 0x40000000,
+	.boot_params = 0xa0000100,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa3xx_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76142d..f1a7703d771 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@ static unsigned long cmx255_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* SSP1 */
 	GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6c2bc..a9926bb7592 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* I2C */
 	GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@ static struct resource cmx270_2700G_resource[] = {
 	},
 };
 
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+	GPIOxx_LCD_TFT_16BPP,
+};
 
 static int cmx270_marathon_probe(struct fb_info *fb)
 {
-	/* save PXA-270 pin settings before enabling 2700G */
-	save_lcd_regs[0] = GPDR1;
-	save_lcd_regs[1] = GPDR2;
-	save_lcd_regs[2] = GAFR1_U;
-	save_lcd_regs[3] = GAFR2_L;
-	save_lcd_regs[4] = GAFR2_U;
-
-	/* Disable PXA-270 on-chip controller driving pins */
-	GPDR1 &= ~(0xfc000000);
-	GPDR2 &= ~(0x00c03fff);
-	GAFR1_U &= ~(0xfff00000);
-	GAFR2_L &= ~(0x0fffffff);
-	GAFR2_U &= ~(0x0000f000);
+	int gpio, err;
+
+	for (gpio = 58; gpio <= 77; gpio++) {
+		err = gpio_request(gpio, "LCD");
+		if (err)
+			return err;
+		gpio_direction_input(gpio);
+	}
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
 	return 0;
 }
 
 static int cmx270_marathon_remove(struct fb_info *fb)
 {
-	GPDR1 =   save_lcd_regs[0];
-	GPDR2 =   save_lcd_regs[1];
-	GAFR1_U = save_lcd_regs[2];
-	GAFR2_L = save_lcd_regs[3];
-	GAFR2_U = save_lcd_regs[4];
+	int gpio;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+	for (gpio = 58; gpio <= 77; gpio++)
+		gpio_free(gpio);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3d8fa..161fc2d6120 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+	desc->chip->ack(irq);
 
 	it8152_irq_demux(irq, desc);
 }
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9e387..d578021d1a1 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
 	GPIO40_GPIO,  /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce73a3..af83caa52dd 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO4_GPIO,  /* Headphone amp power */
 	GPIO7_GPIO,  /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129bed19..8ea97bf53fe 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
 static struct w100_gen_regs e800_lcd_regs = {
 	.lcd_format =            0x00008003,
 	.lcdd_cntl1 =            0x02a00000,
@@ -195,6 +203,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc85fd..aab04f33e49 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@ static unsigned long common_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 00000000000..771137fc1a8
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1	(15)
+#define ICONTROL_MCP251x_nCS2	(16)
+#define ICONTROL_MCP251x_nCS3	(17)
+#define ICONTROL_MCP251x_nCS4	(24)
+
+#define ICONTROL_MCP251x_nIRQ1	(74)
+#define ICONTROL_MCP251x_nIRQ2	(75)
+#define ICONTROL_MCP251x_nIRQ3	(76)
+#define ICONTROL_MCP251x_nIRQ4	(77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 16E6,
+	.model                = CAN_MCP251X_MCP2515,
+	.board_specific_setup = NULL,
+	.power_enable         = NULL,
+	.transceiver_enable   = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info1,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info2,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info3,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+	},
+	{
+		.modalias        = "mcp251x",
+		.max_speed_hz    =