Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

59 files changed, 2299 insertions, 1750 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 89c992b8f75..a6f8eab14ba 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -21,6 +21,11 @@ config CPU_PXA930
 
 config CPU_PXA935
 	bool "PXA935 (codename Tavor-P65)"
+	select CPU_PXA930
+
+config CPU_PXA950
+	bool "PXA950 (codename Tavor-PV2)"
+	select CPU_PXA930
 
 endmenu
 
@@ -79,6 +84,12 @@ config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
 	select PXA25x
@@ -371,6 +382,15 @@ config MACH_PALMTE2
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 	  handheld computer.
 
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
@@ -458,6 +478,7 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -489,6 +510,21 @@ config MACH_EZX_E2
 	default y
 	depends on PXA_EZX
 
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d4c6122a342..f10e152bfc2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
@@ -78,6 +80,8 @@ obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
+
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 00000000000..f23138b8fca
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,361 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	GPIO99_GPIO,		/* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_backlight_power	= balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __func__);
+		/* FIXME something to prod here? */
+	} else {
+		pr_debug("%s: off\n", __func__);
+		/* FIXME something to prod here? */
+	}
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 	= balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+	pr_debug("%s: udc connected\n", __func__);
+	return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+		pr_debug("%s: connect\n", __func__);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~UP2OCR_DPPUE;
+		pr_debug("%s: disconnect\n", __func__);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+	.udc_is_connected = balloon3_udc_is_connected,
+	.udc_command      = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Wakeup GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* NAND & IDLE LED GPIOs */
+	GPIO9_GPIO,
+	GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	},
+	{
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_leds_platform_data,
+	},
+};
+
+static void __init balloon3_init(void)
+{
+	pr_info("Initialising Balloon3\n");
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa_set_i2c_info(NULL);
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+		pxa_set_ac97_info(NULL);
+
+	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+			"LCD Backlight Power");
+		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+		set_pxa_fb_info(&balloon3_pxafb_info);
+	}
+
+	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+		pxa_set_mci_info(&balloon3_mci_platform_data);
+	}
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+	}
+	pxa_set_udc_info(&balloon3_udc_info);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	=  BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= balloon3_map_io,
+	.init_irq	= balloon3_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= balloon3_init,
+	.boot_params	= PHYS_OFFSET + 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 5599bceff73..978a3667e90 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -12,7 +12,6 @@ struct clk {
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
-	struct clk		*other;
 };
 
 #define INIT_CLKREG(_clk,_devname,_conname)		\
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 1d2cec25391..eea78b6c2bc 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -13,13 +13,18 @@
 #include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -34,6 +39,10 @@
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
 
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
 static unsigned long cmx270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -94,8 +103,8 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO26_SSP1_RXD,
 
 	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
 	GPIO87_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
@@ -123,6 +132,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
 	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
 	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
@@ -131,6 +141,7 @@ static unsigned long cmx270_pin_config[] = {
 	/* interrupts */
 	GPIO10_GPIO,	/* DM9000 interrupt */
 	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
 };
 
 /* V3020 RTC */
@@ -271,64 +282,114 @@ static inline void cmx270_init_ohci(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
-			   irq_handler_t cmx270_detect_int,
-			   void *data)
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
+};
+
+static void __init cmx270_init_mmc(void)
 {
-	int err;
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
 
-	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
-	if (err) {
-		dev_warn(dev, "power gpio unavailable\n");
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
 		return err;
-	}
 
-	gpio_direction_output(GPIO105_MMC_POWER, 0);
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
 
-	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		gpio_free(GPIO105_MMC_POWER);
-		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
-			" request MMC card detect IRQ\n");
-	}
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
 
 	return err;
 }
 
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
+static int cm_x270_libertas_teardown(struct spi_device *spi)
 {
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		dev_dbg(dev, "power on\n");
-		gpio_set_value(GPIO105_MMC_POWER, 0);
-	} else {
-		gpio_set_value(GPIO105_MMC_POWER, 1);
-		dev_dbg(dev, "power off\n");
-	}
-}
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
 
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CMX270_MMC_IRQ, data);
-	gpio_free(GPIO105_MMC_POWER);
+	return 0;
 }
 
-static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cmx270_mci_init,
-	.setpower 	= cmx270_mci_setpower,