Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

1 files changed, 7 insertions, 71 deletions

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe340a1..dda310fe71c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
 #include <linux/mtd/sharpsl.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
 
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
 
-static void spitz_ads7846_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.cs_control		= spitz_ads7846_cs,
+	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
 };
 
 static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static void spitz_lcdcon_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.cs_control	= spitz_lcdcon_cs,
+	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
 };
 
-static void spitz_max1111_cs(u32 command)
-{
-	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
 static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.cs_control	= spitz_max1111_cs,
+	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
 };
 
 static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 
 static void __init spitz_init_spi(void)
 {
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
-	if (err)
-		return;
-
-	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
-	if (err)
-		goto err_free_3;
-	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
-	if (err)
-		goto err_free_3;
-
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-	return;
-
-err_free_3:
-	gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
-	gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
-	gpio_free(SPITZ_GPIO_ADS7846_CS);
 }
 #else
 static inline void spitz_init_spi(void) {}