Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	arch/arm/mach-pxa/corgi.c
	arch/arm/mach-pxa/poodle.c
	arch/arm/mach-pxa/spitz.c

25 files changed, 551 insertions, 578 deletions

diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 955bfe60606..7804637a6df 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -30,10 +30,6 @@ typedef enum {
 	DMA_PRIO_LOW = 2
 } pxa_dma_prio;
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
 /*
  * DMA registration
  */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b131027..efbd2aa9ece 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -43,8 +43,10 @@
 #define GPIO_E800_PCMCIA_PWR1    73
 
 /* e7xx IrDA power control */
-#define GPIO_E7XX_IR_ON          38
+#define GPIO_E7XX_IR_OFF         38
 
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_ESERIES_TMIO_PCLR      19
+#define GPIO_ESERIES_TMIO_SUSPEND   45
 #define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 42ee1956750..099f54a41de 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -94,3 +94,7 @@ has detected a cable insertion; driven low otherwise. */
 #define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
 #define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
 #define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
+
+/* for expansion boards that can't be programatically detected */
+extern int am200_init(void);
+
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/include/mach/h5000.h
new file mode 100644
index 00000000000..2a5ae380278
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include <mach/mfp-pxa25x.h>
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON   (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT        (2)
+#define H5000_GPIO_BACKUP_POWER   (3)
+#define H5000_GPIO_ACTION_BUTTON  (4)
+#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
+#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD     (46)
+#define H5000_GPIO_IRDA_TXD     (47)
+
+#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
+#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
+#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
+#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
+#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
+#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
+#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
+#define H5000_GPIO_BT_M_RESET   (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N      (74)
+#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT	(76)
+#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index a582a6d9b92..16ab79547da 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -102,6 +102,9 @@
  *  PXA930	B0	0x69056835	0x5E643013
  *  PXA930	B1	0x69056837	0x7E643013
  *  PXA930	B2	0x69056838	0x8E643013
+ *
+ *  PXA935	A0	0x56056931	0x1E653013
+ *  PXA935	B0	0x56056936	0x6E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -178,12 +181,22 @@
 #define __cpu_is_pxa930(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;		\
+		_id == 0x683;				\
 	 })
 #else
 #define __cpu_is_pxa930(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x693;				\
+	 })
+#else
+#define __cpu_is_pxa935(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -204,8 +217,6 @@
 		__cpu_is_pxa25x(read_cpuid_id());	\
 	})
 
-extern int cpu_is_pxa26x(void);
-
 #define cpu_is_pxa27x()					\
 	({						\
 		__cpu_is_pxa27x(read_cpuid_id());	\
@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void);
 		__cpu_is_pxa930(id);			\
 	 })
 
+#define cpu_is_pxa935()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa935(id);			\
+	 })
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void);
 		_id == 0x3;				\
 	 })
 
+#define __cpu_is_pxa9xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683 || _id == 0x693;		\
+	 })
+
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -259,32 +282,25 @@ extern int cpu_is_pxa26x(void);
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
+#define cpu_is_pxa9xx()					\
+	({						\
+		__cpu_is_pxa9xx(read_cpuid_id());	\
+	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
+/* return the clock tick rate of the OS timer */
+extern unsigned long get_clock_tick_rate(void);
 #endif
 
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 600fd4f7660..262691fb97d 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,15 +6,13 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 5c4e320c143..6c9b21c5132 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,8 +1,13 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
+#ifndef __ASM_ARCH_LITTLETON_H
+#define __ASM_ARCH_LITTLETON_H
+
+#include <mach/gpio.h>
 
 #define LITTLETON_ETH_PHYS	0x30000000
 
 #define LITTLETON_GPIO_LCD_CS	(17)
 
-#endif /* __ASM_ARCH_ZYLONITE_H */
+#define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
+
+#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 59aef89808d..f626730ee42 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -18,16 +18,6 @@
 #define PHYS_OFFSET	UL(0xa0000000)
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * The nodes are matched with the physical SDRAM banks as follows:
  *
  * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
@@ -47,6 +37,7 @@ void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 617cab2cc8d..a72869b73ee 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -158,4 +158,35 @@
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
 #define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#endif
+
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 122bdbd5318..da4f85a4f99 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -11,6 +11,12 @@
 #include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+
 /* GPIO */
 #define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
 #define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fabd9b4df82..fa73f56a137 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -421,6 +421,7 @@
 #define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
 #define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
 #define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
 
 /* CIR */
 #define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 8483cb51183..02868447b0b 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -10,12 +10,14 @@
 	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
 
 /* Global GPIOs */
-#define GPIO9_CHARGE_nEN			9
+#define GPIO9_CHARGE_EN				9
 #define GPIO18_POWEROFF				18
 #define GPIO87_LCD_POWER			87
+#define GPIO96_AC_DETECT			96
+#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
 
 /* USB */
-#define GPIO13_USB_DETECT			13
+#define GPIO13_nUSB_DETECT			13
 #define GPIO22_USB_ENABLE			22
 
 /* SDIO bits */
@@ -24,7 +26,10 @@
 #define GPIO91_SDIO_EN				91
 
 /* Bluetooth */
+#define GPIO14_BT_nACTIVITY			14
 #define GPIO83_BT_ON				83
+#define GPIO77_BT_UNKNOWN1			77
+#define GPIO86_BT_MAYBE_nRESET			86
 
 /* GPS */
 #define GPIO23_GPS_UNKNOWN1			23
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 4d452fcb150..cfca8155be7 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,6 +15,7 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
new file mode 100644
index 00000000000..6c4b1f7de20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmasoc.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+struct palm27x_asoc_info {
+	int	jack_gpio;
+};
+
+#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
+void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
+#else
+static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 15295d96000..31d615aa772 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -13,6 +13,7 @@
 #ifndef __PXA_REGS_H
 #define __PXA_REGS_H
 
+#include <mach/hardware.h>
 
 /*
  * PXA Chip selects
@@ -123,298 +124,6 @@
 #define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
- */
-
-/*
- * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
- */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/