aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb /arch/arm/mach-orion5x
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
Diffstat (limited to 'arch/arm/mach-orion5x')
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c72
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c1
4 files changed, 22 insertions, 53 deletions
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 78a6a11d821..9b1c9531029 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 2f5dc54cd4c..51ba2b81a10 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 399130fac0b..0a56b9444f1 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,8 +19,8 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -53,12 +53,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED 0
-
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
-#ifdef CONFIG_LEDS
-
/*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
****************************************************************************/
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
- int val;
-
- if (evt == led_idle_end)
- val = 1;
- else if (evt == led_idle_start)
- val = 0;
- else
- return;
-
- gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
- int pin;
-
- if (machine_is_rd88f5182()) {
- pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED 0
- if (gpio_request(pin, "DBGLED") == 0) {
- if (gpio_direction_output(pin, 0) != 0) {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to set output pin %d\n", pin);
- gpio_free(pin);
- return 0;
- }
- } else {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to request gpio %d\n", pin);
- return 0;
- }
-
- leds_event = rd88f5182_dbgled_event;
- }
-
- return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+ {
+ .name = "rd88f5182:cpu",
+ .default_trigger = "cpu0",
+ .gpio = RD88F5182_GPIO_LED,
+ },
+};
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+ .leds = rd88f5182_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f5182_gpio_led_data,
+ },
+};
/*****************************************************************************
* PCI
@@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
+ platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 92df49c1b62..ed50910b08a 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -20,7 +20,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>