Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.33

94 files changed, 5168 insertions, 725 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index aad194f61a3..7309aab305a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -65,6 +65,10 @@ config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3517EVM
+	bool "OMAP3517/ AM3517 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -97,6 +101,30 @@ config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP_ZOOM3
+	bool "OMAP3630 Zoom3 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_CM_T35
+	bool "CompuLab CM-T35 module"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_IGEP0020
+	bool "IGEP0020"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3630SDP
+	bool "OMAP3630 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
+
+config OMAP3_EMU
+	bool "OMAP3 debugging peripherals"
+	depends on ARCH_OMAP3
+	select OC_ETM
+	help
+	  Say Y here to enable debugging hardware of omap3
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb16777661..32548a4510c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
@@ -44,6 +44,12 @@ obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+
+obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
+mailbox_mach-objs			:= mailbox.o
+
 iommu-y					+= iommu2.o
 iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
 
@@ -69,17 +75,33 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
+					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
+					   mmc-twl4030.o
 
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
+obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
+obj-y					+= usb-ehci.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 42217b32f83..db9374bc528 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -31,12 +31,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.init_irq	= omap_2430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0acb5560229..491364e44c7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,16 +30,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
-#include <mach/control.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/control.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
@@ -410,6 +410,15 @@ static struct regulator_init_data sdp3430_vpll2 = {
 	.consumer_supplies	= &sdp3430_vdvi_supply,
 };
 
+static struct twl4030_codec_audio_data sdp3430_audio = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data sdp3430_codec = {
+	.audio_mclk = 26000000,
+	.audio = &sdp3430_audio,
+};
+
 static struct twl4030_platform_data sdp3430_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -420,6 +429,7 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
 	.usb		= &sdp3430_usb_data,
+	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -484,6 +494,18 @@ static void enable_board_wakeup_source(void)
 	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -500,6 +522,7 @@ static void __init omap_3430sdp_init(void)
 	usb_musb_init();
 	board_smc91x_init();
 	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
 }
 
 static void __init omap_3430sdp_map_io(void)
@@ -511,7 +534,7 @@ static void __init omap_3430sdp_map_io(void)
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
 	.init_irq	= omap_3430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
new file mode 100755
index 00000000000..348b70b9833
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs             = 3,
+	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	board_smc91x_data.gpio_irq = 158;
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
+
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 126,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap_sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel sdp_config[] __initdata = {
+};
+
+static void __init omap_sdp_init_irq(void)
+{
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap_sdp_init(void)
+{
+	zoom_peripherals_init();
+	board_smc91x_init();
+	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,