Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC specific updates" from Arnd Bergmann:
 "These changes are all specific to an soc family or the code for one
  soc.  Lots of work for Tegra3 this time, but also a lot of other
  platforms.  There will be another (smaller) set of soc patches later
  in the merge window for stuff that has dependencies on external trees
  or that was sent just before the merge window opened.

  The asoc tree added a few devices to the i.mx platform, which conflict
  with other devices added in the same place here.

  The tegra Makefile conflicts between a number of branches, mostly
  because of changes regarding localtimer.c, which was removed in the
  end.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fix up some trivial conflicts, including the mentioned Tegra Makefile.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: EXYNOS: fix cycle count for periodic mode of clock event timers
  ARM: EXYNOS: add support JPEG
  ARM: EXYNOS: Add DMC1, allow PPMU access for DMC
  ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition
  ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata()
  ARM: SAMSUNG: Add __init attribute to samsung_bl_set()
  ARM: S5PV210: Add usb otg phy control
  ARM: S3C64XX: Add usb otg phy control
  ARM: EXYNOS: Enable l2 configuration through device tree
  ARM: EXYNOS: remove useless code to save/restore L2
  ARM: EXYNOS: save L2 settings during bootup
  ARM: S5P: add L2 early resume code
  ARM: EXYNOS: Add support AFTR mode on EXYNOS4210
  ARM: mx35: Setup the AIPS registers
  ARM: mx5: Use common function for configuring AIPS
  ARM: mx3: Setup AIPS registers
  ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI
  ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE
  ARM: imx: update imx_v6_v7_defconfig
  ARM: tegra: Demote EMC clock inconsistency BUG to WARN
  ...

2 files changed, 86 insertions, 109 deletions

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 613e2c1eeb2..0e79b7bc6aa 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -29,7 +29,7 @@
 #include "control.h"
 
 static unsigned int omap_revision;
-
+static const char *cpu_rev;
 u32 omap_features;
 
 unsigned int omap_rev(void)
@@ -114,7 +114,7 @@ void omap_get_die_id(struct omap_die_id *odi)
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
-static void __init omap24xx_check_revision(void)
+void __init omap2xxx_check_revision(void)
 {
 	int i, j;
 	u32 idcode, prod_id;
@@ -168,13 +168,63 @@ static void __init omap24xx_check_revision(void)
 	pr_info("\n");
 }
 
+#define OMAP3_SHOW_FEATURE(feat)		\
+	if (omap3_has_ ##feat())		\
+		printk(#feat" ");
+
+static void __init omap3_cpuinfo(void)
+{
+	const char *cpu_name;
+
+	/*
+	 * OMAP3430 and OMAP3530 are assumed to be same.
+	 *
+	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
+	 * on available features. Upon detection, update the CPU id
+	 * and CPU class bits.
+	 */
+	if (cpu_is_omap3630()) {
+		cpu_name = "OMAP3630";
+	} else if (cpu_is_omap3517()) {
+		/* AM35xx devices */
+		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
+	} else if (cpu_is_ti816x()) {
+		cpu_name = "TI816X";
+	} else if (cpu_is_am335x()) {
+		cpu_name =  "AM335X";
+	} else if (cpu_is_ti814x()) {
+		cpu_name = "TI814X";
+	} else if (omap3_has_iva() && omap3_has_sgx()) {
+		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
+		cpu_name = "OMAP3430/3530";
+	} else if (omap3_has_iva()) {
+		cpu_name = "OMAP3525";
+	} else if (omap3_has_sgx()) {
+		cpu_name = "OMAP3515";
+	} else {
+		cpu_name = "OMAP3503";
+	}
+
+	/* Print verbose information */
+	pr_info("%s ES%s (", cpu_name, cpu_rev);
+
+	OMAP3_SHOW_FEATURE(l2cache);
+	OMAP3_SHOW_FEATURE(iva);
+	OMAP3_SHOW_FEATURE(sgx);
+	OMAP3_SHOW_FEATURE(neon);
+	OMAP3_SHOW_FEATURE(isp);
+	OMAP3_SHOW_FEATURE(192mhz_clk);
+
+	printk(")\n");
+}
+
 #define OMAP3_CHECK_FEATURE(status,feat)				\
 	if (((status & OMAP3_ ##feat## _MASK) 				\
 		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
 		omap_features |= OMAP3_HAS_ ##feat;			\
 	}
 
-static void __init omap3_check_features(void)
+void __init omap3xxx_check_features(void)
 {
 	u32 status;
 
@@ -201,9 +251,11 @@ static void __init omap3_check_features(void)
 	 * TODO: Get additional info (where applicable)
 	 *       e.g. Size of L2 cache.
 	 */
+
+	omap3_cpuinfo();
 }
 
-static void __init omap4_check_features(void)
+void __init omap4xxx_check_features(void)
 {
 	u32 si_type;
 
@@ -228,12 +280,13 @@ static void __init omap4_check_features(void)
 	}
 }
 
-static void __init ti81xx_check_features(void)
+void __init ti81xx_check_features(void)
 {
 	omap_features = OMAP3_HAS_NEON;
+	omap3_cpuinfo();
 }
 
-static void __init omap3_check_revision(const char **cpu_rev)
+void __init omap3xxx_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
@@ -247,7 +300,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
-		*cpu_rev = "1.0";
+		cpu_rev = "1.0";
 		return;
 	}
 
@@ -268,26 +321,26 @@ static void __init omap3_check_revision(const char **cpu_rev)
 		case 0: /* Take care of early samples */
 		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
-			*cpu_rev = "2.0";
+			cpu_rev = "2.0";
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
-			*cpu_rev = "2.1";
+			cpu_rev = "2.1";
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
-			*cpu_rev = "3.0";
+			cpu_rev = "3.0";
 			break;
 		case 4:
 			omap_revision = OMAP3430_REV_ES3_1;
-			*cpu_rev = "3.1";
+			cpu_rev = "3.1";
 			break;
 		case 7:
 		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
 			omap_revision = OMAP3430_REV_ES3_1_2;
-			*cpu_rev = "3.1.2";
+			cpu_rev = "3.1.2";
 		}
 		break;
 	case 0xb868:
@@ -300,13 +353,13 @@ static void __init omap3_check_revision(const char **cpu_rev)
 		switch (rev) {
 		case 0:
 			omap_revision = OMAP3517_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = OMAP3517_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 		}
 		break;
 	case 0xb891:
@@ -315,36 +368,36 @@ static void __init omap3_check_revision(const char **cpu_rev)
 		switch(rev) {
 		case 0: /* Take care of early samples */
 			omap_revision = OMAP3630_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 			omap_revision = OMAP3630_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 			break;
 		case 2:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = OMAP3630_REV_ES1_2;
-			*cpu_rev = "1.2";
+			cpu_rev = "1.2";
 		}
 		break;
 	case 0xb81e:
 		switch (rev) {
 		case 0:
 			omap_revision = TI8168_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 1:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = TI8168_REV_ES1_1;
-			*cpu_rev = "1.1";
+			cpu_rev = "1.1";
 			break;
 		}
 		break;
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
-		*cpu_rev = "1.0";
+		cpu_rev = "1.0";
 		break;
 	case 0xb8f2:
 		switch (rev) {
@@ -352,29 +405,29 @@ static void __init omap3_check_revision(const char **cpu_rev)
 		/* FALLTHROUGH */
 		case 1:
 			omap_revision = TI8148_REV_ES1_0;
-			*cpu_rev = "1.0";
+			cpu_rev = "1.0";
 			break;
 		case 2:
 			omap_revision = TI8148_REV_ES2_0;
-			*cpu_rev = "2.0";
+			cpu_rev = "2.0";
 			break;
 		case 3:
 		/* FALLTHROUGH */
 		default:
 			omap_revision = TI8148_REV_ES2_1;
-			*cpu_rev = "2.1";
+			cpu_rev = "2.1";
 			break;
 		}
 		break;
 	default:
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
-		*cpu_rev = "1.2";
+		cpu_rev = "1.2";
 		pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
 	}
 }
 
-static void __init omap4_check_revision(void)
+void __init omap4xxx_check_revision(void)
 {
 	u32 idcode;
 	u16 hawkeye;
@@ -447,89 +500,6 @@ static void __init omap4_check_revision(void)
 		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
-#define OMAP3_SHOW_FEATURE(feat)		\
-	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
-
-static void __init omap3_cpuinfo(const char *cpu_rev)
-{
-	const char *cpu_name;
-
-	/*
-	 * OMAP3430 and OMAP3530 are assumed to be same.
-	 *
-	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
-	 * on available features. Upon detection, update the CPU id
-	 * and CPU class bits.
-	 */
-	if (cpu_is_omap3630()) {
-		cpu_name = "OMAP3630";
-	} else if (cpu_is_omap3517()) {
-		/* AM35xx devices */
-		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
-	} else if (cpu_is_ti816x()) {
-		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
-		cpu_name =  "AM335X";
-	} else if (cpu_is_ti814x()) {
-		cpu_name = "TI814X";
-	} else if (omap3_has_iva() && omap3_has_sgx()) {
-		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
-		cpu_name = "OMAP3430/3530";
-	} else if (omap3_has_iva()) {
-		cpu_name = "OMAP3525";
-	} else if (omap3_has_sgx()) {
-		cpu_name = "OMAP3515";
-	} else {
-		cpu_name = "OMAP3503";
-	}
-
-	/* Print verbose information */
-	pr_info("%s ES%s (", cpu_name, cpu_rev);
-
-	OMAP3_SHOW_FEATURE(l2cache);
-	OMAP3_SHOW_FEATURE(iva);
-	OMAP3_SHOW_FEATURE(sgx);
-	OMAP3_SHOW_FEATURE(neon);
-	OMAP3_SHOW_FEATURE(isp);
-	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
-}
-
-/*
- * Try to detect the exact revision of the omap we're running on
- */
-void __init omap2_check_revision(void)
-{
-	const char *cpu_rev;
-
-	/*
-	 * At this point we have an idea about the processor revision set
-	 * earlier with omap2_set_globals_tap().
-	 */
-	if (cpu_is_omap24xx()) {
-		omap24xx_check_revision();
-	} else if (cpu_is_omap34xx()) {
-		omap3_check_revision(&cpu_rev);
-
-		/* TI81XX doesn't have feature register */
-		if (!cpu_is_ti81xx())
-			omap3_check_features();
-		else
-			ti81xx_check_features();
-
-		omap3_cpuinfo(cpu_rev);
-		return;
-	} else if (cpu_is_omap44xx()) {
-		omap4_check_revision();
-		omap4_check_features();
-		return;
-	} else {
-		pr_err("OMAP revision unknown, please fix!\n");
-	}
-}
-
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index cd47a71297b..065bd768987 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -348,7 +348,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 
 static void __init omap_common_init_early(void)
 {
-	omap2_check_revision();
 	omap_init_consistent_dma_size();
 }
 
@@ -389,6 +388,7 @@ static void __init omap_hwmod_init_postsetup(void)
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
+	omap2xxx_check_revision();
 	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap242x_powerdomains_init();
@@ -403,6 +403,7 @@ void __init omap2420_init_early(void)
 void __init omap2430_init_early(void)
 {
 	omap2_set_globals_243x();
+	omap2xxx_check_revision();
 	omap_common_init_early();
 	omap2xxx_voltagedomains_init();
 	omap243x_powerdomains_init();
@@ -421,6 +422,8 @@ void __init omap2430_init_early(void)
 void __init omap3_init_early(void)
 {
 	omap2_set_globals_3xxx();
+	omap3xxx_check_revision();
+	omap3xxx_check_features();
 	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -453,6 +456,8 @@ void __init am35xx_init_early(void)
 void __init ti81xx_init_early(void)
 {
 	omap2_set_globals_ti81xx();
+	omap3xxx_check_revision();
+	ti81xx_check_features();
 	omap_common_init_early();
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
@@ -467,6 +472,8 @@ void __init ti81xx_init_early(void)
 void __init omap4430_init_early(void)
 {
 	omap2_set_globals_443x();
+	omap4xxx_check_revision();
+	omap4xxx_check_features();
 	omap_common_init_early();
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();