Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	net/sched/sch_hfsc.c
	net/sched/sch_htb.c
	net/sched/sch_tbf.c

7 files changed, 59 insertions, 17 deletions

diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 5b0c77732df..8f9a64d650e 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 #define RTC_IO_GPIO		(153)
 #define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(160)
+#define RTC_RD_GPIO		(53)
 #define RTC_CS_GPIO		(163)
+#define RTC_CS_EN_GPIO		(160)
 
 struct v3020_platform_data cm_t3517_v3020_pdata = {
 	.use_gpio	= 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
 
 static void __init cm_t3517_init_rtc(void)
 {
+	int err;
+
+	err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+	if (err) {
+		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+		return;
+	}
+
+	gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
 	platform_device_register(&cm_t3517_rtc_device);
 }
 #else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 	},
 	{
 		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
 		.size           = 32 * NAND_BLOCK_SIZE,
 	},
 	{
 		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
 		.size           = MTDPART_SIZ_FULL,
 	},
 };
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* RTC GPIOs: IO, WR#, RD#, CS# */
+
+	/* RTC GPIOs: */
+	/* IO - GPIO153 */
 	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* WR# - GPIO154 */
 	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* RD# - GPIO53 */
+	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS# - GPIO163 */
 	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS EN - GPIO160 */
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
 	/* HSUSB1 RESET */
 	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* HSUSB2 RESET */
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 00bb1fc5e01..e906e05bb41 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index e8cb32fd7f1..de9ec8ddd2a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -34,7 +34,6 @@
 #include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
-#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 #include "scrm44xx.h"
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index e20b98636ab..58e42f76603 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
 	if (IS_ERR(cd)) {
 		pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s: %s: not yet implemented\n",
+		       clkdm->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm)
 		return -EINVAL;
 
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_del_autodeps(clkdm);
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 51920fc7fc5..10622c914ab 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -30,8 +30,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
 #include "prcm44xx.h"
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index d5233890370..cf600e22bf8 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -19,7 +19,6 @@
 #include <plat/prcm.h>
 
 #include "powerdomain.h"
-#include "prm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 4e48e786bec..7b7c2683ae7 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -42,6 +42,8 @@
 
 #include "timer-gp.h"
 
+#include <plat/common.h>
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+	omap_init_clocksource_32k();
+}
+
 #else
 /*
  * clocksource