Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "MFD bits for the 3.7 merge window.

  As usual we have a few new drivers:

   - TI LP8788
   - TI OMAP USB TLL
   - Maxim MAX8907
   - SMSC ECE1099
   - Dialog Semiconductor DA9055
   - A simpler syscon driver that allow us to get rid of the anatop one.

  Drivers are also gradually getting Device Tree and IRQ domain support.

  The following drivers got DT support:
   - palmas, 88pm860x, tc3589x and twl4030-audio

  And those ones now use the IRQ domain APIs:
   - 88pm860x, tc3589x, db8500_prcmu

  Also some other interesting changes:
   - Intel's ICH LPC now supports Lynx Point
   - TI's twl4030-audio added a GPO child
   - tps6527 enabled its backlight subdevice
   - The twl6030 pwm driver moved to the new PWM subsystem

  And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,
  palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family."

Fix up various annoying conflicts: the DT and IRQ domain support came in
twice and was already in 3.6. And then it was apparently rebased.

Guys, DON'T REBASE!

* tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)
  ARM: dts: Enable 88pm860x pmic
  mfd: 88pm860x: Move gpadc init into touch
  mfd: 88pm860x: Device tree support
  mfd: 88pm860x: Use irqdomain
  mfd: smsc: Add support for smsc gpio io/keypad driver
  backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe
  mfd: DA9055 core driver
  mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list
  mfd: wm5110: Add register patches for revision B
  mfd: wm5110: Disable control interface error report for WM5110 rev B
  mfd: max8907: Remove regulator-compatible from DT docs
  backlight: Add TPS65217 WLED driver
  mfd: Add backlight as subdevice to the tps65217
  mfd: Provide the PRCMU with its own IRQ domain
  mfd: Fix max8907 sparse warning
  mfd: Add lp8788 mfd driver
  mfd: dbx500: Provide a more accurate smp_twd clock
  mfd: rc5t583: Fix warning messages
  regulator: palmas: Add DT support
  mfd: palmas: Change regulator defns to better suite DT
  ...

1 files changed, 22 insertions, 9 deletions

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index ac95daaa470..3c434498e12 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -33,10 +33,12 @@
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 
 #define OMAP_USBHS_DEVICE	"usbhs_omap"
+#define OMAP_USBTLL_DEVICE	"usbhs_tll"
 #define	USBHS_UHH_HWMODNAME	"usb_host_hs"
 #define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
 static struct usbhs_omap_platform_data		usbhs_data;
+static struct usbtll_omap_platform_data		usbtll_data;
 static struct ehci_hcd_omap_platform_data	ehci_data;
 static struct ohci_hcd_omap_platform_data	ohci_data;
 
@@ -485,13 +487,14 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
-	struct omap_hwmod	*oh[2];
+	struct omap_hwmod	*uhh_hwm, *tll_hwm;
 	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 		usbhs_data.port_mode[i] = pdata->port_mode[i];
+		usbtll_data.port_mode[i] = pdata->port_mode[i];
 		ohci_data.port_mode[i] = pdata->port_mode[i];
 		ehci_data.port_mode[i] = pdata->port_mode[i];
 		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
@@ -510,25 +513,35 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		setup_4430ohci_io_mux(pdata->port_mode);
 	}
 
-	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
-	if (!oh[0]) {
+	uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
+	if (!uhh_hwm) {
 		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
 		return;
 	}
 
-	oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
-	if (!oh[1]) {
+	tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
+	if (!tll_hwm) {
 		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
 		return;
 	}
 
-	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
-				(void *)&usbhs_data, sizeof(usbhs_data),
+	pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
+				&usbtll_data, sizeof(usbtll_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
 	if (IS_ERR(pdev)) {
-		pr_err("Could not build hwmod devices %s,%s\n",
-			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
+		pr_err("Could not build hwmod device %s\n",
+		       USBHS_TLL_HWMODNAME);
+		return;
+	}
+
+	pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
+				&usbhs_data, sizeof(usbhs_data),
+				omap_uhhtll_latency,
+				ARRAY_SIZE(omap_uhhtll_latency), false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build hwmod devices %s\n",
+		       USBHS_UHH_HWMODNAME);
 		return;
 	}
 }