Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

45 files changed, 894 insertions, 207 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index eeab35dea07..b997a35830f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@ config ARCH_OMAP4
 	depends on ARCH_OMAP2PLUS
 	select CPU_V7
 	select ARM_GIC
+	select LOCAL_TIMERS if SMP
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select ARM_ERRATA_720789
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index c06eb423c4e..9afd087cc29 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -307,9 +307,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
-
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
@@ -398,12 +395,13 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
 };
 
 static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
 };
 
 /* VPLL2 for digital video outputs */
 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 333ceb2c8fb..56702c5e577 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -36,6 +36,7 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -47,6 +48,8 @@
 #define ETH_KS8851_QUART		138
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
+#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 
 static const int sdp4430_keymap[] = {
 	KEY(0, 0, KEY_E),
@@ -547,6 +550,12 @@ static struct regulator_init_data sdp4430_vusb = {
 	},
 };
 
+static struct regulator_init_data sdp4430_clk32kg = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+};
+
 static struct twl4030_platform_data sdp4430_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -562,6 +571,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 	.vaux1		= &sdp4430_vaux1,
 	.vaux2		= &sdp4430_vaux2,
 	.vaux3		= &sdp4430_vaux3,
+	.clk32kg	= &sdp4430_clk32kg,
 	.usb		= &omap4_usbphy_data
 };
 
@@ -621,6 +631,76 @@ static void __init omap_sfh7741prox_init(void)
 	}
 }
 
+static void sdp4430_hdmi_mux_init(void)
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
+static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
+{
+	int status;
+
+	status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_hpd");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
+		return status;
+	}
+	status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_ls_oe");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
+		goto error1;
+	}
+
+	return 0;
+
+error1:
+	gpio_free(HDMI_GPIO_HPD);
+
+	return status;
+}
+
+static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
+{
+	gpio_free(HDMI_GPIO_LS_OE);
+	gpio_free(HDMI_GPIO_HPD);
+}
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.platform_enable = sdp4430_panel_enable_hdmi,
+	.platform_disable = sdp4430_panel_disable_hdmi,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *sdp4430_dss_devices[] = {
+	&sdp4430_hdmi_device,
+};
+
+static struct omap_dss_board_info sdp4430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
+	.devices	= sdp4430_dss_devices,
+	.default_device	= &sdp4430_hdmi_device,
+};
+
+void omap_4430sdp_display_init(void)
+{
+	sdp4430_hdmi_mux_init();
+	omap_display_init(&sdp4430_dss_data);
+}
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -729,6 +809,8 @@ static void __init omap_4430sdp_init(void)
 	status = omap4_keyboard_init(&sdp4430_keypad_data);
 	if (status)
 		pr_err("Keypad initialization failed: %d\n", status);
+
+	omap_4430sdp_display_init();
 }
 
 static void __init omap_4430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 7b5647954c1..02a12b41c0f 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -488,7 +488,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
 };
 
 static struct regulator_consumer_supply cm_t35_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_consumer_supply cm_t35_vdvi_supply =
 	REGULATOR_SUPPLY("vdvi", "omapdss");
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index aa27483c493..65f9fde2c56 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -196,7 +196,7 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 };
 
 static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -277,8 +277,10 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll1_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -319,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vpll1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
+	.consumer_supplies	= devkit8000_vpll1_supplies,
 };
 
 /* VAUX4 for ads7846 and nubs */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d3199b4ecdb..34cf982b967 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -485,8 +485,10 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static struct regulator_consumer_supply igep2_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data igep2_vpll2 = {
 	.constraints = {
@@ -499,8 +501,8 @@ static struct regulator_init_data igep2_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &igep2_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(igep2_vpll2_supplies),
+	.consumer_supplies	= igep2_vpll2_supplies,
 };
 
 static void __init igep2_display_init(void)
@@ -694,7 +696,7 @@ static void __init igep2_init(void)
 	igep2_init_smsc911x();
 
 	/*
-	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
 	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
 	 */
 	igep2_wlan_bt_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index b10db0e6ee6..2cf86c3cb1a 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -440,7 +440,7 @@ static void __init igep3_init(void)
 	igep3_leds_init();
 
 	/*
-	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
 	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
 	 */
 	igep3_wifi_bt_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7640c054f43..33007fd4a08 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -232,10 +232,12 @@ static struct omap_dss_board_info beagle_dss_data = {
 };
 
 static struct regulator_consumer_supply beagle_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
-static struct regulator_consumer_supply beagle_vdvi_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static void __init beagle_display_init(void)
 {
@@ -422,8 +424,8 @@ static struct regulator_init_data beagle_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdvi_supplies),
+	.consumer_supplies	= beagle_vdvi_supplies,
 };
 
 static struct twl4030_usb_data beagle_usb_data = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0fa2c7b208b..5a1a916e5cc 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -542,7 +542,7 @@ static struct twl4030_codec_data omap3evm_codec_data = {
 };
 
 static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_evm_vdac = {
@@ -560,8 +560,10 @@ static struct regulator_init_data omap3_evm_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data omap3_evm_vpll2 = {
 	.constraints = {
@@ -573,8 +575,8 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_evm_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vpll2_supplies),
+	.consumer_supplies	= omap3_evm_vpll2_supplies,
 };
 
 /* ads7846 on SPI */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2e5dc21e347..07dba888f45 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -342,11 +342,12 @@ static struct regulator_consumer_supply pandora_vmmc3_supply =
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
 
 static struct regulator_consumer_supply pandora_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply =
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8ebdbc38b9d..a6e0b9161c9 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -439,7 +439,7 @@ static struct twl4030_codec_data omap3stalker_codec_data = {
 };
 
 static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_stalker_vdac = {
@@ -457,8 +457,10 @@ static struct regulator_init_data omap3_stalker_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data omap3_stalker_vpll2 = {
 	.constraints		= {
@@ -471,8 +473,8 @@ static struct regulator_init_data omap3_stalker_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 		| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_stalker_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vpll2_supplies),
+	.consumer_supplies	= omap3_stalker_vpll2_supplies,
 };
 
 static struct twl4030_platform_data omap3stalker_twldata = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 0f4d8a762a7..f3a7b101191 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -34,11 +34,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <plat/display.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+#include <plat/panel-generic-dpi.h>
 #include "timer-gp.h"
 
 #include "hsmmc.h"
@@ -49,6 +51,8 @@
 #define GPIO_HUB_NRESET		62
 #define GPIO_WIFI_PMENA		43
 #define GPIO_WIFI_IRQ		53
+#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 
 /* wl127x BT, FM, GPS connectivity chip */
 static int wl1271_gpios[] = {46, -1, -1};
@@ -281,19 +285,6 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct regulator_init_data omap4_panda_vaux1 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data omap4_panda_vaux2 = {
 	.constraints = {
 		.min_uV			= 1200000,
@@ -349,19 +340,6 @@ static struct regulator_init_data omap4_panda_vpp = {
 	},
 };
 
-static struct regulator_init_data omap4_panda_vusim = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2900000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data omap4_panda_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
@@ -407,6 +385,12 @@ static struct regulator_init_data omap4_panda_vusb = {
 	},
 };
 
+static struct regulator_init_data omap4_panda_clk32kg = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+};
+
 static struct twl4030_platform_data omap4_panda_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -414,14 +398,13 @@ static struct twl4030_platform_data omap4_panda_twldata = {
 	/* Regulators */
 	.vmmc		= &omap4_panda_vmmc,
 	.vpp		= &omap4_panda_vpp,
-	.vusim		= &omap4_panda_vusim,
 	.vana		= &omap4_panda_vana,
 	.vcxio		= &omap4_panda_vcxio,
 	.vdac		= &omap4_panda_vdac,
 	.vusb		= &omap4_panda_vusb,
-	.vaux1		= &omap4_panda_vaux1,
 	.vaux2		= &omap4_panda_vaux2,
 	.vaux3		= &omap4_panda_vaux3,
+	.clk32kg	= &omap4_panda_clk32kg,
 	.usb		= &omap4_usbphy_data,
 };
 
@@ -433,6 +416,17 @@ static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
 		.platform_data = &omap4_panda_twldata,
 	},
 };
+
+/*
+ * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
+ * is connected as I2C slave device, and can be accessed at address 0x50
+ */
+static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
 static int __init omap4_panda_i2c_init(void)
 {
 	/*
@@ -442,7 +436,12 @@ static int __init omap4_panda_i2c_init(void)
 	omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
 			ARRAY_SIZE(omap4_panda_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
+					ARRAY_SIZE(panda_i2c_eeprom));
 	omap_register_i2c_bus(4, 400, NULL, 0);
 	return 0;
 }
@@ -462,6 +461,64 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* gpio 0 - TFP410 PD */
+	OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
+	/* dispc2_data23 */
+	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data22 */
+	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data21 */
+	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data20 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data19 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data18 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data15 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data14 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data13 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data12 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data11 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data10 */
+	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data9 */
+	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data16 */
+	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data17 */
+	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_hsync */
+	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_pclk */
+	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_vsync */
+	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_de */
+	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data8 */
+	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data7 */
+	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data6 */
+	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data5 */
+	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data4 */
+	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data3 */
+	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data2 */
+	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data1 */
+	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data0 */
+	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
@@ -535,6 +592,128 @@ static inline void board_serial_init(void)
 }
 #endif
 
+/* Display DVI */
+#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
+
+static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+/* Using generic display panel */
+static struct panel_generic_dpi_data omap4_dvi_panel = {
+	.name			= "generic",
+	.platform_enable	= omap4_panda_enable_dvi,
+	.platform_disable	= omap4_panda_disable_dvi,
+};
+
+struct omap_dss_device omap4_panda_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &omap4_dvi_panel,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+int __init omap4_panda_dvi_init(void)
+{
+	int r;
+
+	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
+	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
+				GPIOF_OUT_INIT_LOW, "DVI PD");
+	if (r)
+		pr_err("Failed to get DVI powerdown GPIO\n");
+
+	return r;
+}
+
+
+static void omap4_panda_hdmi_mux_init(void)
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
+static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
+{
+	int status;
+
+	status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_hpd");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
+		return status;
+	}
+	status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_ls_oe");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
+		goto error1;
+	}
+
+	return 0;
+
+error1:
+	gpio_free(HDMI_GPIO_HPD);
+
+	return status;
+}
+
+static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
+{
+	gpio_free(HDMI_GPIO_LS_OE);
+	gpio_free(HDMI_GPIO_HPD);
+}
+
+static struct omap_dss_device  omap4_panda_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.platform_enable = omap4_panda_panel_enable_hdmi,
+	.platform_disable = omap4_panda_panel_disable_hdmi,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *omap4_panda_dss_devices[] = {
+	&omap4_panda_dvi_device,
+	&omap4_panda_hdmi_device,
+};
+
+static struct omap_dss_board_info omap4_panda_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
+	.devices	= omap4_panda_dss_devices,
+	.default_device	= &omap4_panda_dvi_device,
+};
+
+void omap4_panda_display_init(void)
+{
+	int r;
+
+	r = omap4_panda_dvi_init();
+	if (r)
+		pr_err("error initializing panda DVI\n");
+
+	omap4_panda_hdmi_mux_init();
+	omap_display_init(&omap4_panda_dss_data);
+}
+
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
@@ -553,6 +732,7 @@ static void __init omap4_panda_init(void)
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
+	omap4_panda_display_init();
 }
 
 static void __init omap4_panda_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d0961945c65..59ca33326b8 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -28,6 +28,8 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,10 +43,14 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -68,8 +74,6 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <plat/mcspi.h>
-#include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -94,16 +98,32 @@ static struct ads7846_platform_data ads7846_config = {
 	.keep_vref_on		= 1,
 };
 
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &ads7846_mcspi_config,
-		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
-		.platform_data		= &ads7846_config,
-	}
+/* fixed regulator for ads7846 */
+static struct regulator_consumer_supply ads7846_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+static struct regulator_init_data vads7846_regulator = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+	.supply_name		= "vads7846",
+	.microvolts		= 3300000, /* 3.3V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.init_data		= &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &vads7846,
+	},
 };
 
 static void __init overo_ads7846_init(void)
@@ -116,8 +136,7 @@ static void __init overo_ads7846_init(void)
 		return;
 	}
 
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
+	platform_device_register(&vads7846_device);
 }
 
 #else
@@ -233,6 +252,137 @@ static inline void __init overo_init_smsc911x(void)
 static inline void __init overo_init_smsc911x(void) { return; }
 #endif
 
+/* DSS */
+static int lcd_enabled;
+static int dvi_enabled;
+
+#define OVERO_GPIO_LCD_EN 144
+#define OVERO_GPIO_LCD_BL 145
+
+static void __init overo_display_init(void)
+{
+	if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
+		gpio_export(OVERO_GPIO_LCD_EN, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_LCD_EN\n");
+
+	if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
+		gpio_export(OVERO_GPIO_LCD_BL, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_LCD_BL\n");
+}
+
+static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.name			= "generic",
+	.platform_enable	= overo_panel_enable_dvi,
+	.platform_disable	= overo_panel_disable_dvi,
+};
+
+static struct omap_dss_device overo_dvi_device = {
+	.name			= "dvi",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device overo_tv_device = {
+	.name = "tv",
+	.driver_name = "venc",
+	.type = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
+	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
+	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
+	lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd43_panel = {
+	.name			= "samsung_lte430wq_f0c",
+	.platform_enable	= overo_panel_enable_lcd,
+	.platform_disable	= overo_panel_disable_lcd,
+};
+
+static struct omap_dss_device overo_lcd43_device = {
+	.name			= "lcd43",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd43_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct omap_dss_device overo_lcd35_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd35",
+	.driver_name		= "lgphilips_lb035q02_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= overo_panel_enable_lcd,
+	.platform_disable	= overo_panel_disable_lcd,
+};
+#endif
+
+static struct omap_dss_device *overo_dss_devices[] = {
+	&overo_dvi_device,
+	&overo_tv_device,
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+	&overo_lcd35_device,
+#endif
+	&overo_lcd43_device,
+};
+
+static struct omap_dss_board_info overo_dss_data = {
+	.num_devices	= ARRAY_SIZE(overo_dss_devices),
+	.devices	= overo_dss_devices,
+	.default_device	= &overo_dvi_device,
+};
+
+static struct regulator_consumer_supply overo_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+
+static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -323,6 +473,93 @@ static struct regulator_consumer_supply overo_vmmc1_supply = {
 	.supply			= "vmmc",
 };
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "overo:red:gpio21",
+		.default_trigger	= "heartbeat",
+		.gpio			= 21,
+		.active_low		= true,
+	},
+	{
+		.name			= "overo:blue:gpio22",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= true,
+	},
+	{
+		.name			= "overo:blue:COM",
+		.default_trigger	= "mmc0",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_leds_pdata = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_leds_pdata,
+	},
+};
+
+static void __init overo_init_led(void)
+{
+	platform_device_register(&gpio_leds_device);
+}
+
+#else
+static inline void __init overo_init_led(void) { return; }
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_0,
+		.gpio			= 23,
+		.desc			= "button0",
+		.wakeup			= 1,
+	},
+	{
+		.code			= BTN_1,
+		.gpio			= 14,
+		.desc			= "button1",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_keys_pdata = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_keys_pdata,
+	},
+};
+
+static void __init overo_init_keys(void)
+{
+	platform_device_register(&gpio_keys_device);
+}
+
+#else
+static inline void __init overo_init_keys(void) { return; }
+#endif
+
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -330,6 +567,11 @@ static int overo_twl_gpio_setup(struct device *dev,
 
 	overo_vmmc1_supply.dev = mmc[0].dev;
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
 	return 0;
 }
 
@@ -337,6 +579,7 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
 
@@ -358,6 +601,35 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data overo_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data overo_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vdds_dsi_supply),
+	.consumer_supplies	= overo_vdds_dsi_supply,
+};
+
 static struct twl4030_codec_audio_data overo_audio_data;
 
 static struct twl4030_codec_data overo_codec_data = {
@@ -365,8 +637,6 @@ static struct twl4030_codec_data overo_codec_data = {
 	.audio = &overo_audio_data,
 };
 
-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
-
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -374,6 +644,8 @@ static struct twl4030_platform_data overo_twldata = {
 	.usb		= &overo_usb_data,
 	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
+	.vdac		= &overo_vdac,
+	.vpll2		= &overo_vpll2,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
@@ -394,18 +666,38 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static struct platform_device overo_lcd_device = {
-	.name		= "overo_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config overo_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+#endif
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+	{
+		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.bus_num		= 1,
+		.chip_select		= 1,
+		.max_speed_hz		= 500000,
+		.mode			= SPI_MODE_3,
+	},
+#endif
 };
 
-static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&overo_lcd_config },
-};
+static int __init overo_spi_init(void)
+{
+	overo_ads7846_init();
+	spi_register_board_info(overo_spi_board_info,
+			ARRAY_SIZE(overo_spi_board_info));
+	return 0;
+}
 
 static void __init overo_init_early(void)
 {
@@ -414,15 +706,10 @@ static void __init overo_init_early(void)
 				  mt46h32m32lf6_sdrc_params);
 }
 
-static struct platform_device *overo_devices[] __initdata = {
-	&overo_lcd_device,
-};
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
@@ -444,16 +731,18 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	overo_i2c_init();
-	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
+	overo_spi_init();
 	overo_ads7846_init();
 	overo_init_smsc911x();
+	overo_display_init();
+	overo_init_led();
+	overo_init_keys();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 5f1900c532e..bbcb6775a6a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -372,7 +372,7 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 };
 
 static struct regulator_consumer_supply rx51_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
 };
 
 static struct regulator_init_data rx51_vaux1 = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 448ab60195d..8dee7549fbd 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -226,11 +226,13 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
-static struct regulator_consumer_supply zoom_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_consumer_supply zoom_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_init_data zoom_vpll2 = {
 	.constraints = {
@@ -241,8 +243,8 @@ static struct regulator_init_data zoom_vpll2 = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies		= 1,
-	.consumer_supplies		= &zoom_vpll2_supply,
+	.num_consumer_supplies		= ARRAY_SIZE(zoom_vpll2_supplies),
+	.consumer_supplies		= zoom_vpll2_supplies,
 };
 
 static struct regulator_init_data zoom_vdac = {
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index b6f65d4ac97..2926d028b6e 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1804,10 +1804,10 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_242X),
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
-	CLK("omapdss",	"ick",		&dss_ick,	CK_242X),
-	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_242X),
-	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_242X),
-	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_242X),
+	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
+	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_242X),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_242X),
+	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index bba018331a7..0c79d39e302 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1894,10 +1894,10 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK("omapdss",	"ick",		&dss_ick,	CK_243X),
-	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X),
-	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X),
-	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X),
+	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
+	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_243X),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_243X),
+	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_243X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index fcb321a64f1..75b119bd9cd 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3356,13 +3356,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_34XX | CK_36XX),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_3XXX),
-	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_3XXX),
-	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_3XXX),
-	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("omapdss_dss",	"tv_clk",	&dss_tv_fck,	CK_3XXX),
+	CLK("omapdss_dss",	"video_clk",	&dss_96m_fck,	CK_3XXX),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_alwon_fck, CK_3XXX),
+	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d32ed979a8d..276992d3b7f 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3114,11 +3114,16 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
 	CLK(NULL,	"dmic_fck",			&dmic_fck,	CK_443X),
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk,	CK_443X),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
-	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
+	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
+	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
+	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
+	/*
+	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
+	 * with OMAP2/3.
+	 */
+	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ab878545bd9..6cb6c03293d 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
  * clkdm_init - set up the clockdomain layer
  * @clkdms: optional pointer to an array of clockdomains to register
  * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Set up internal state.  If a pointer to an array of clockdomains
  * @clkdms was supplied, loop through the list of clockdomains,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 85b3dce6564..5823584d9cd 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -125,7 +125,7 @@ struct clockdomain {
 };
 
 /**
- * struct clkdm_ops - Arch specfic function implementations
+ * struct clkdm_ops - Arch specific function implementations
  * @clkdm_add_wkdep: Add a wakeup dependency between clk domains
  * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
  * @clkdm_read_wkdep: Read wakeup dependency state between clk domains
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a44c5230340..1c240eff391 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
 /**
  * omap3_cpuidle_update_states() - Update the cpuidle states
- * @mpu_deepest_state:	Enable states upto and including this for mpu domain
- * @core_deepest_state:	Enable states upto and including this for core domain
+ * @mpu_deepest_state:	Enable states up to and including this for mpu domain
+ * @core_deepest_state:	Enable states up to and including this for core domain
  *
  * This goes through the list of states available and enables and disables the
  * validity of C states based on deepest state that can be achieved for the
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 0d2d6a9c303..7b855856459 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -35,6 +35,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "devices.h"
 
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
@@ -65,7 +66,7 @@ static int __init omap3_l3_init(void)
 
 	WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
 
-	return PTR_ERR(od);
+	return IS_ERR(od) ? PTR_ERR(od) : 0;
 }
 postcore_initcall(omap3_l3_init);
 
@@ -102,7 +103,7 @@ postcore_initcall(omap4_l3_init);
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
-static struct resource cam_resources[] = {
+static struct resource omap2cam_resources[] = {
 	{
 		.start		= OMAP24XX_CAMERA_BASE,
 		.end		= OMAP24XX_CAMERA_BASE + 0xfff,
@@ -114,19 +115,13 @@ static struct resource cam_resources[] = {
 	}
 };
 
-static struct platform_device omap_cam_device = {
+static struct platform_device omap2cam_device = {
 	.name		= "omap24xxcam",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cam_resources),
-	.resource	= cam_resources,
+	.num_resources	= ARRAY_SIZE(omap2cam_resources),
+	.resource	= omap2cam_resources,
 };
-
-static inline void omap_init_camera(void)
-{
-	platform_device_register(&omap_cam_device);
-}
-
-#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#endif
 
 static struct resource omap3isp_resources[] = {
 	{
@@ -135,11 +130,6 @@ static struct resource omap3isp_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= OMAP3430_ISP_CBUFF_BASE,
-		.end		= OMAP3430_ISP_CBUFF_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
 		.start		= OMAP3430_ISP_CCP2_BASE,
 		.end		= OMAP3430_ISP_CCP2_END,
 		.flags		= IORESOURCE_MEM,
@@ -175,13 +165,33 @@ static struct resource omap3isp_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= OMAP3430_ISP_CSI2A_BASE,
-		.end		= OMAP3430_ISP_CSI2A_END,
+		.start		= OMAP3430_ISP_CSI2A_REGS1_BASE,
+		.end		= OMAP3430_ISP_CSI2A_REGS1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= OMAP3430_ISP_CSI2PHY_BASE,
-		.end		= OMAP3430_ISP_CSI2PHY_END,
+		.start		= OMAP3430_ISP_CSIPHY2_BASE,
+		.end		= OMAP3430_ISP_CSIPHY2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2A_REGS2_BASE,
+		.end		= OMAP3630_ISP_CSI2A_REGS2_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2C_REGS1_BASE,
+		.end		= OMAP3630_ISP_CSI2C_REGS1_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSIPHY1_BASE,
+		.end		= OMAP3630_ISP_CSIPHY1_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= OMAP3630_ISP_CSI2C_REGS2_BASE,
+		.end		= OMAP3630_ISP_CSI2C_REGS2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -197,15 +207,19 @@ static struct platform_device omap3isp_device = {
 	.resource	= omap3isp_resources,
 };
 
-static inline void omap_init_camera(void)
+int omap3_init_camera(struct isp_platform_data *pdata)
 {
-	platform_device_register(&omap3isp_device);
+	omap3isp_device.dev.platform_data = pdata;
+	return platform_device_register(&omap3isp_device);
 }
-#else
+
 static inline void omap_init_camera(void)
 {
-}
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
+	if (cpu_is_omap24xx())
+		platform_device_register(&omap2cam_device);
 #endif
+}
 
 struct omap_device_pm_latency omap_keyboard_latency[] = {
 	{
@@ -239,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			ARRAY_SIZE(omap_keyboard_latency), 0);
 
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n",
+		WARN(1, "Can't build omap_device for %s:%s.\n",
 						name, oh->name);
 		return PTR_ERR(od);
 	}
@@ -359,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 	od = omap_device_build(name, spi_num, oh, pdata,
 				sizeof(*pdata),	omap_mcspi_latency,
 				ARRAY_SIZE(omap_mcspi_latency), 0);
-	WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
 				name, oh->name);
 	kfree(pdata);
 	return 0;
@@ -711,7 +725,7 @@ static int __init omap_init_wdt(void)
 	od = omap_device_build(dev_name, id, oh, NULL, 0,
 				omap_wdt_latency,
 				ARRAY_SIZE(omap_wdt_latency), 0);
-	WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+	WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
 				dev_name, oh->name);
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h
new file mode 100644
index 00000000000..f61eb6e5d13
--- /dev/null
+++ b/arch/arm/mach-omap2/devices.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-omap2/devices.h
+ *
+ * OMAP2 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
+#define __ARCH_ARM_MACH_OMAP_DEVICES_H
+
+struct isp_platform_data;
+
+int omap3_init_camera(struct isp_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index b18db84b034..256d23fb79a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,8 @@
 #include <linux/err.h>
 
 #include <plat/display.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -32,9 +34,87 @@ static struct platform_device omap_display_device = {
 	},
 };
 
+static struct omap_device_pm_latency omap_dss_latency[] = {
+	[0] = {
+		.deactivate_func        = omap_device_idle_hwmods,
+		.activate_func          = omap_device_enable_hwmods,
+		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+/* oh_core is used for getting opt-clocks */
+static struct omap_hwmod	*oh_core;
+
+static bool opt_clock_available(const char *clk_role)
+{
+	int i;
+
+	for (i = 0; i < oh_core->opt_clks_cnt; i++) {
+		if (!strcmp(oh_core->opt_clks[i].role, clk_role))
+			return true;
+	}
+	return false;
+}
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	int i;
+	struct omap_display_platform_data pdata;
+
+	/*
+	 * omap: valid DSS hwmod names
+	 * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc
+	 * omap3,4: dss_dsi1
+	 * omap4: dss_dsi2, dss_hdmi
+	 */
+	char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc",
+		"dss_dsi1", "dss_dsi2", "dss_hdmi" };
+	char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi",
+		"omapdss_venc", "omapdss_dsi1", "omapdss_dsi2",
+		"omapdss_hdmi" };
+	int oh_count;
+
+	memset(&pdata, 0, sizeof(pdata));
+
+	if (cpu_is_omap24xx())
+		oh_count = ARRAY_SIZE(oh_name) - 3;
+		/* last 3 hwmod dev in oh_name are not available for omap2 */
+	else if (cpu_is_omap44xx())
+		oh_count = ARRAY_SIZE(oh_name);
+	else
+		oh_count = ARRAY_SIZE(oh_name) - 2;
+		/* last 2 hwmod dev in oh_name are not available for omap3 */
+
+	/* opt_clks are always associated with dss hwmod */
+	oh_core = omap_hwmod_lookup("dss_core");
+	if (!oh_core) {
+		pr_err("Could not look up dss_core.\n");
+		return -ENODEV;
+	}
+
+	pdata.board_data = board_data;
+	pdata.board_data->get_last_off_on_transaction_id = NULL;
+	pdata.opt_clock_available = opt_clock_available;
+
+	for (i = 0; i < oh_count; i++) {
+		oh = omap_hwmod_lookup(oh_name[i]);
+		if (!oh) {
+			pr_err("Could not look up %s\n", oh_name[i]);
+			return -ENODEV;
+		}
+
+		od = omap_device_build(dev_name[i], -1, oh, &pdata,
+				sizeof(struct omap_display_platform_data),
+				omap_dss_latency,
+				ARRAY_SIZE(omap_dss_latency), 0);
+
+		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+				oh_name[i]))
+			return -ENODEV;
+	}
 	omap_display_device.dev.platform_data = board_data;
 
 	r = platform_device_register(&omap_display_device);
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 34922b2d2e3..c9ff0e79703 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
 	kfree(p);
 	if (IS_ERR(od)) {
-		pr_err("%s: Cant build omap_device for %s:%s.\n",
+		pr_err("%s: Can't build omap_device for %s:%s.\n",
 			__func__, name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 413de18c1d2..9529842ae05 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	kfree(pdata);
 
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n",
+		WARN(1, "Can't build omap_device for %s:%s.\n",
 					name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 674174365f7..130034bf01d 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -693,6 +693,7 @@ static int __init gpmc_init(void)
 {
 	u32 l, irq;
 	int cs, ret = -EINVAL;
+	int gpmc_irq;
 	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
@@ -701,12 +702,15 @@ static int __init gpmc_init(void)
 			l = OMAP2420_GPMC_BASE;
 		else
 			l = OMAP34XX_GPMC_BASE;
+		gpmc_irq = INT_34XX_GPMC_IRQ;
 	} else if (cpu_is_omap34xx()) {
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
+		gpmc_irq = INT_34XX_GPMC_IRQ;
 	} else if (cpu_is_omap44xx()) {
 		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
+		gpmc_irq = OMAP44XX_IRQ_GPMC;
 	}
 
 	if (WARN_ON(!ck))
@@ -739,16 +743,17 @@ static int __init gpmc_init(void)
 	/* initalize the irq_chained */
 	irq = OMAP_GPMC_IRQ_BASE;
 	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		set_irq_handler(irq, handle_simple_irq);
+		irq_set_chip_and_handler(irq, &dummy_irq_chip,
+						handle_simple_irq);
 		set_irq_flags(irq, IRQF_VALID);
 		irq++;
 	}
 
-	ret = request_irq(INT_34XX_GPMC_IRQ,
+	ret = request_irq(gpmc_irq,
 			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
 	if (ret)
 		pr_err("gpmc: irq-%d could not claim: err %d\n",
-						INT_34XX_GPMC_IRQ, ret);
+						gpmc_irq, ret);
 	return ret;
 }
 postcore_initcall(gpmc_init);
@@ -757,8 +762,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
 	u8 cs;
 
-	if (irq != INT_34XX_GPMC_IRQ)
-		return IRQ_HANDLED;
 	/* check cs to invoke the irq */
 	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
 	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 137e1a5f3d8..b2f30bed5a2 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
 		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
 	if (IS_ERR(od)) {
-		WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name);
+		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
 		kfree(mmc_data->slots[0].name);
 		goto done;
 	}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index bc524b94fd5..237e4530abf 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -223,8 +223,7 @@ void __init omap_init_irq(void)
 	       nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
 
 	for (i = 0; i < nr_of_irqs; i++) {
-		set_irq_chip(i, &omap_irq_chip);
-		set_irq_handler(i, handle_level_irq);
+		irq_set_chip_and_handler(i, &omap_irq_chip, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
 }
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 565b9064a32..4a6ef6ab845 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 				ARRAY_SIZE(omap2_mcbsp_latency), false);
 	kfree(pdata);
 	if (IS_ERR(od))  {
-		pr_err("%s: Cant build omap_device for %s:%s.\n", __func__,
+		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
 					name, oh->name);
 		return PTR_ERR(od);
 	}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index bb043cbb388..a4ab1e36431 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 			seq_printf(s, "/* %s */\n", m->muxnames[mode]);
 
 		/*
-		 * XXX: Might be revisited to support differences accross
+		 * XXX: Might be revisited to support differences across
 		 * same OMAP generation.
 		 */
 		seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
index adbea0d03e0..9fd93149ebd 100644
--- a/arch/arm/mach-omap2/mux2430.h
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -22,7 +22,7 @@
  * absolute addresses.  The name in the macro is the mode-0 name of
  * the pin.  NOTE: These registers are 8-bits wide.
  *
- * Note that these defines use SDMMC instead of MMC for compability
+ * Note that these defines use SDMMC instead of MMC for compatibility
  * with signal names used in 3630.
  */
 #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 62823467163..8eb3ce1bbfb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1168,11 +1168,6 @@ static struct omap_hwmod_class omap2420_dss_hwmod_class = {
 	.sysc = &omap2420_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap2420_dss_irqs[] = {
-	{ .irq = 25 },
-};
-
 static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 };
@@ -1221,8 +1216,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap2420_dss_hwmod_class,
 	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap2420_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap2420_dss_irqs),
 	.sdma_reqs	= omap2420_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap2420_dss_sdma_chs),
 	.prcm		= {
@@ -1265,6 +1258,10 @@ static struct omap_hwmod_class omap2420_dispc_hwmod_class = {
 	.sysc = &omap2420_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap2420_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1297,6 +1294,8 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
 static struct omap_hwmod omap2420_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap2420_dispc_hwmod_class,
+	.mpu_irqs	= omap2420_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2420_dispc_irqs),
 	.main_clk	= "dss1_fck",
 	.prcm		= {
 		.omap2 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 0fdf2cabfb1..e6e3810db77 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1268,10 +1268,6 @@ static struct omap_hwmod_class omap2430_dss_hwmod_class = {
 	.sysc = &omap2430_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap2430_dss_irqs[] = {
-	{ .irq = 25 },
-};
 static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 };
@@ -1314,8 +1310,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap2430_dss_hwmod_class,
 	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap2430_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dss_irqs),
 	.sdma_reqs	= omap2430_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_dss_sdma_chs),
 	.prcm		= {
@@ -1358,6 +1352,10 @@ static struct omap_hwmod_class omap2430_dispc_hwmod_class = {
 	.sysc = &omap2430_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap2430_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1384,6 +1382,8 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
 static struct omap_hwmod omap2430_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap2430_dispc_hwmod_class,
+	.mpu_irqs	= omap2430_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dispc_irqs),
 	.main_clk	= "dss1_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
 			 * I2CHS IP's do not follow the usual pattern.
 			 * prcm_reg_id alone cannot be used to program
 			 * the iclk and fclk. Needs to be handled using
-			 * additonal flags when clk handling is moved
+			 * additional flags when clk handling is moved
 			 * to hwmod framework.
 			 */
 			.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c819c306693..b98e2dfcba2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1480,11 +1480,6 @@ static struct omap_hwmod_class omap3xxx_dss_hwmod_class = {
 	.sysc = &omap3xxx_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = {
-	{ .irq = 25 },
-};
-
 static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 	{ .name = "dsi1", .dma_req = 74 },
@@ -1548,7 +1543,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "dssclk", .clk = "dss_96m_fck" },
+	{ .role = "video_clk", .clk = "dss_96m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
 };
 
@@ -1556,8 +1551,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap3xxx_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap3xxx_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dss_irqs),
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap3xxx_dss_sdma_chs),
 
@@ -1584,8 +1577,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap3xxx_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap3xxx_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dss_irqs),
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap3xxx_dss_sdma_chs),
 
@@ -1631,6 +1622,10 @@ static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = {
 	.sysc = &omap3xxx_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap3xxx_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1664,6 +1659,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
 static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap3xxx_dispc_hwmod_class,
+	.mpu_irqs	= omap3xxx_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dispc_irqs),
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1689,6 +1686,10 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
 };
 
+static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
+	{ .irq = 25 },
+};
+
 /* dss_dsi1 */
 static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
 	{
@@ -1722,6 +1723,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
+	.mpu_irqs	= omap3xxx_dsi1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dsi1_irqs),
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
 		.omap2 = {
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 265bff3acb9..5f2da7565b6 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -226,7 +226,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev)
 	struct omap3_l3         *l3;
 	struct resource         *res;
 	int                     ret;
-	int                     irq;
 
 	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
 	if (!l3) {
@@ -249,18 +248,17 @@ static int __init omap3_l3_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	ret = request_irq(irq, omap3_l3_app_irq,
+	l3->debug_irq = platform_get_irq(pdev, 0);
+	ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
 		IRQF_DISABLED | IRQF_TRIGGER_RISING,
 		"l3-debug-irq", l3);
 	if (ret) {
 		dev_err(&pdev->dev, "couldn't request debug irq\n");
 		goto err3;
 	}
-	l3->debug_irq = irq;
 
-	irq = platform_get_irq(pdev, 1);
-	ret = request_irq(irq, omap3_l3_app_irq,
+	l3->app_irq = platform_get_irq(pdev, 1);
+	ret = request_irq(l3->app_irq, omap3_l3_app_irq,
 		IRQF_DISABLED | IRQF_TRIGGER_RISING,
 		"l3-app-irq", l3);
 
@@ -269,7 +267,6 @@ static int __init omap3_l3_probe(struct platform_device *pdev)
 		goto err4;
 	}
 
-	l3->app_irq = irq;
 	goto err0;
 
 err4:
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index e2e605fe913..05f6abc96b0 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
 		else
 			/*
 			 * Enable VBUS Valid, AValid and IDDIG
-			 * high impedence
+			 * high impedance
 			 */
 			__raw_writel(IDDIG | AVALID | VBUSVALID,
 						ctrl_base + USBOTGHS_CONTROL);
 	} else {
-		/* Enable session END and IDIG to high impedence. */
+		/* Enable session END and IDIG to high impedance. */
 		__raw_writel(SESSEND | IDDIG, ctrl_base +
 					USBOTGHS_CONTROL);
 	}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 0a8e74e3e81..07d6140baa9 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -308,7 +308,7 @@ int __init omap3_twl_init(void)
  * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
  * in those scenarios this bit is to be cleared (enable = false).
  *
- * Returns 0 on sucess, error is returned if I2C read/write fails.
+ * Returns 0 on success, error is returned if I2C read/write fails.
  */
 int __init omap3_twl_set_sr_bit(bool enable)
 {
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 49c6513e90d..9af08473bf1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 /**
  * pwrdm_init - set up the powerdomain layer
  * @pwrdm_list: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Loop through the array of powerdomains @pwrdm_list, registering all
  * that are available on the current CPU. If pwrdm_list is supplied
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 027f40bd235..d23d979b9c3 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -121,7 +121,7 @@ struct powerdomain {
 };
 
 /**
- * struct pwrdm_ops - Arch specfic function implementations
+ * struct pwrdm_ops - Arch specific function implementations
  * @pwrdm_set_next_pwrst: Set the target power state for a pd
  * @pwrdm_read_next_pwrst: Read the target power state set for a pd
  * @pwrdm_read_pwrst: Read the current power state of a pd
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 9c9c113788b..469a920a74d 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 
 /*
  * The USBTLL Save-and-Restore mechanism is broken on
- * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
  * needs to be disabled on these chips.
  * Refer: 3430 errata ID i459 and 3630 errata ID i579
  *
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 8f674c9442b..13e24f913dd 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  * driver register and sr device intializtion API's. Only one call
  * will ultimately succeed.
  *
- * Currenly this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrrupt handler for a particular SR
  * if smartreflex class driver is already registered and has
  * requested for interrupts and the SR interrupt line in present.
  */
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
index 954682e6439..31c0ac4cd66 100644
--- a/arch/arm/mach-omap2/timer-mpu.c
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -26,9 +26,14 @@
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
+	/* Local timers are not supprted on OMAP4430 ES1.0 */
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		return -ENXIO;
+
 	evt->irq = OMAP44XX_IRQ_LOCALTIMER;
 	twd_timer_setup(evt);
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6facf7becf..6fb520999b6 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -851,7 +851,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
  * @voltdm:	pointer to the VDD whose voltage is to be reset.
  *
  * This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used expecially
+ * to be at and resets the voltage to that level. Should be used especially
  * while disabling any voltage compensation modules.
  */
 void omap_voltage_reset(struct voltagedomain *voltdm)
@@ -912,7 +912,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
  * This API searches only through the non-compensated voltages int the
  * voltage table.
  * Returns pointer to the voltage table entry corresponding to volt on
- * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * success. Returns -ENODATA if no voltage table exisits for the passed voltage
  * domain or if there is no matching entry.
  */
 struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,