ARM: OMAP3: Add minimal omap3430 support

Add minimal omap3430 support based on earlier patches from
Syed Mohammed Khasim. Also merge in omap34xx SRAM support
from Karthik Dasu and use consistent naming for sram init
functions.

Also do following changes that make 34xx support usable:

- Remove unused sram.c functions for 34xx

- Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally
  in entry-macro.S

- Update mach-omap2/io.c to support 2420, 2430, and 34xx

- Also merge in 34xx GPMC changes to add fields wr_access and
  wr_data_mux_bus from Adrian Hunter

- Remove memory initialization call omap2_init_memory() until
  until more generic memory initialization patches are posted.
  It's OK to rely on bootloader initialization until then.

Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com>
Signed-off-by: Karthik Dasu<karthik-dp@ti.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

8 files changed, 371 insertions, 34 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d536f..e2481e4045e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,8 +15,17 @@ config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP24XX
 
+config ARCH_OMAP34XX
+	bool "OMAP34xx Based System"
+	depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+	bool "OMAP3430 support"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select ARCH_OMAP_OTG
+
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 800639e7c6a..0dc40db3811 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 149bfba43cf..375ad27479c 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -220,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 
 	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
 
+	if (cpu_is_omap34xx()) {
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+	}
+
 	/* caller is expected to have initialized CONFIG1 to cover
 	 * at least sync vs async
 	 */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 03c6ab1a3b1..71a9de382d2 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -43,7 +43,9 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,
 		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
@@ -51,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = {
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual        = L4_24XX_VIRT,
-		.pfn            = __phys_to_pfn(L4_24XX_PHYS),
-		.length         = L4_24XX_SIZE,
-		.type           = MT_DEVICE
+		.virtual	= L4_24XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
+		.length		= L4_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
+	{
+		.virtual	= DSP_MEM_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
+		.length		= DSP_MEM_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DSP_IPI_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
+		.length		= DSP_IPI_24XX_SIZE,
+		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= DSP_MMU_24XX_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
+		.length		= DSP_MMU_24XX_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+#endif
+
 #ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
 	{
 		.virtual	= L4_WK_243X_VIRT,
 		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS),
@@ -69,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = {
 		.length		= OMAP243X_GPMC_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= OMAP243X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS),
+		.length		= OMAP243X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS),
+		.length		= OMAP243X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+};
 #endif
+#endif
+
+#ifdef	CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= L3_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_34XX_PHYS),
+		.length		= L3_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= L4_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
+		.length		= L4_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= L4_WK_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WK_34XX_PHYS),
+		.length		= L4_WK_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP34XX_GPMC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+		.length		= OMAP34XX_GPMC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP343X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS),
+		.length		= OMAP343X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP343X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS),
+		.length		= OMAP343X_SDRC_SIZE,
 		.type		= MT_DEVICE
-	}
+	},
+	{
+		.virtual	= L4_PER_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER_34XX_PHYS),
+		.length		= L4_PER_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= L4_EMU_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS),
+		.length		= L4_EMU_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
 };
+#endif
 
 void __init omap2_map_common_io(void)
 {
-	iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
 
 	/* Normally devicemaps_init() would flush caches and tlb after
 	 * mdesc->map_io(), but we must also do it here because of the CPU
@@ -112,11 +201,6 @@ void __init omap2_init_common_hw(void)
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
 	omap2_init_memory();
-#endif
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index c39e26dc5ee..d354e0fe447 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -128,6 +128,8 @@ void __init omap_init_irq(void)
 
 		if (cpu_is_omap24xx())
 			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+		else if (cpu_is_omap34xx())
+			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
 
 		omap_irq_bank_init_one(bank);
 
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 6b49cc9cbdc..48b01f4cebc 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -102,6 +102,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	return prev;
 }
 
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type)
+{
+}
+#endif
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
@@ -166,6 +177,9 @@ void __init omap2_init_memory(void)
 {
 	u32 l;
 
+	if (!cpu_is_omap2420())
+		return;
+
 	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6188e2f9785..5558803cd99 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -298,13 +298,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
 
 /* TLL - HSUSB: 12-pin TLL Port 1*/
 MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
@@ -324,13 +324,13 @@ MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
 
 /* TLL - HSUSB: 12-pin TLL Port 2*/
 MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
@@ -350,13 +350,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
 
 /* TLL - HSUSB: 12-pin TLL Port 3*/
 MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
@@ -373,6 +373,49 @@ MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
 MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
 		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
new file mode 100644
index 00000000000..2c714613634
--- /dev/null
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -0,0 +1,179 @@
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+	.text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
+	cmp	r3, #0x2
+	blne	configure_sdrc
+	cmp	r3, #0x2
+	blne	lock_dll
+	cmp	r3, #0x1
+	blne	unlock_dll
+	bl	sdram_in_selfrefresh	@ put the SDRAM in self refresh
+	bl 	configure_core_dpll
+	bl	enable_sdrc
+	cmp	r3, #0x1
+	blne	wait_dll_unlock
+	cmp	r3, #0x2
+	blne	wait_dll_lock
+	cmp	r3, #0x1
+	blne	configure_sdrc
+	mov 	r0, #0 			@ return value
+	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
+unlock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	orr	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+lock_dll:
+	ldr	r4, omap3_sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	bic	r5, r5, #0x4
+	str	r5, [r4]
+	bx	lr
+sdram_in_selfrefresh:
+	mov	r5, #0x0		@ Move 0 to R5
+	mcr	p15, 0, r5, c7, c10, 5	@ memory barrier
+	ldr	r4, omap3_sdrc_power	@ read the SDRC_POWER register
+	ldr	r5, [r4]		@ read the contents of SDRC_POWER
+	orr 	r5, r5, #0x40		@ enable self refresh on idle req
+	str 	r5, [r4]		@ write back to SDRC_POWER register
+	ldr	r4, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
+	ldr	r5, [r4]
+	bic	r5, r5, #0x2		@ disable iclk bit for SRDC
+	str 	r5, [r4]
+wait_sdrc_idle:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr 	r5, [r4]
+	and 	r5, r5, #0x2		@ check for SDRC idle
+	cmp 	r5, #2
+	bne 	wait_sdrc_idle
+	bx 	lr
+configure_core_dpll:
+	ldr 	r4, omap3_cm_clksel1_pll
+	ldr	r5, [r4]
+	ldr	r6, core_m2_mask_val	@ modify m2 for core dpll
+	and	r5, r5, r6
+	orr	r5, r5, r3, lsl #0x1B	@ r3 contains the M2 val
+	str	r5, [r4]
+	mov 	r5, #0x800		@ wait for the clock to stabilise
+	cmp	r3, #2
+	bne	wait_clk_stable
+	bx	lr
+wait_clk_stable:
+	subs 	r5, r5, #1
+	bne	wait_clk_stable
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	bx	lr
+enable_sdrc:
+	ldr 	r4, omap3_cm_iclken1_core
+	ldr	r5, [r4]
+	orr 	r5, r5, #0x2		@ enable iclk bit for SDRC
+	str 	r5, [r4]
+wait_sdrc_idle1:
+	ldr 	r4, omap3_cm_idlest1_core
+	ldr	r5, [r4]
+	and 	r5, r5, #0x2
+	cmp	r5, #0
+	bne	wait_sdrc_idle1
+	ldr	r4, omap3_sdrc_power
+	ldr	r5, [r4]
+	bic 	r5, r5, #0x40
+	str 	r5, [r4]
+	bx	lr
+wait_dll_lock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and 	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr
+wait_dll_unlock:
+	ldr	r4, omap3_sdrc_dlla_status
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x0
+	bne	wait_dll_unlock
+	bx	lr
+configure_sdrc:
+	ldr	r4, omap3_sdrc_rfr_ctrl
+	str	r0, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrla
+	str	r1, [r4]
+	ldr	r4, omap3_sdrc_actim_ctrlb
+	str	r2, [r4]
+	bx	lr
+
+omap3_sdrc_power:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+	.word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+	.word	. - omap3_sram_configure_core_dpll