Merge tag 'omap-for-v3.9/pm-signed' into omap-for-v3.9/pm-wfi-take2

OMAP PM related updates via Paul Walmsley <paul@pwsan.com>:

Remove some dead OMAP clock and device integration code and data.
Also, clean up the way that the OMAP device integration code blocks
WFI/WFE to use a consistent mechanism, controlled by a data flag.

Several OMAP2+ power management fixes, optimizations, and cleanup.
This series is a prerequisite for the functional powerdomain
conversion series.

1 files changed, 10 insertions, 33 deletions

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c333fa6dffa..b2a4df62354 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -90,11 +90,7 @@ static int omap2_enter_full_retention(void)
 	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 
 	/* Workaround to kill USB */
@@ -137,15 +133,10 @@ no_sleep:
 	/* Mask future PRCM-to-MPU interrupts */
 	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 
-	return 0;
-}
-
-static int omap2_i2c_active(void)
-{
-	u32 l;
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
 
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
+	return 0;
 }
 
 static int sti_console_enabled;
@@ -172,11 +163,6 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
-	/* Putting MPU into the WFI state while a transfer is active
-	 * seems to cause the I2C block to timeout. Why? Good question. */
-	if (omap2_i2c_active())
-		return;
-
 	/* The peripherals seem not to be able to wake up the MPU when
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
@@ -186,17 +172,16 @@ static void omap2_enter_mpu_retention(void)
 		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
 		/* Try to enter MPU retention */
-		omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
-				  OMAP_LOGICRETSTATE_MASK,
-				  MPU_MOD, OMAP2_PM_PWSTCTRL);
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
 	} else {
 		/* Block MPU retention */
-
-		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
-						 OMAP2_PM_PWSTCTRL);
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	}
 
 	omap2_sram_idle();
+
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 }
 
 static int omap2_can_sleep(void)
@@ -251,25 +236,17 @@ static void __init prcm_setup_regs(void)
 	for (i = 0; i < num_mem_banks; i++)
 		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
 
-	/* Set CORE powerdomain's next power state to RETENTION */
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
 
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
 	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 
 	/* Force-power down DSP, GFX powerdomains */
 
 	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(dsp_clkdm);
 
 	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(gfx_clkdm);
 
 	/* Enable hardware-supervised idle for all clkdms */
 	clkdm_for_each(omap_pm_clkdms_setup, NULL);