OMAP3: control/PRCM: add omap3_ctrl_write_boot_mode()

Get rid of the open-coded scratchpad write in mach-omap2/prcm.c and
replace it with an actual API, omap3_ctrl_write_boot_mode().  While
there, get rid of the gratuitous omap_writel().

There's not much documentation available for what should wind up in
the scratchpad here, so more documentation would be appreciated.
Also, at some point, we should formalize our treatment of the scratchpad;
right now, accesses to the scratchpad are not well-documented.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

1 files changed, 31 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 0269bb055b6..d058f7c3ec6 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -209,6 +209,37 @@ void omap4_ctrl_pad_writel(u32 val, u16 offset)
 	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Set the bootmode in the scratchpad RAM.  This is used after the
+ * system restarts.  Not sure what actually uses this - it may be the
+ * bootloader, rather than the boot ROM - contrary to the preserved
+ * comment below.  No return value.
+ */
+void omap3_ctrl_write_boot_mode(u8 bootmode)
+{
+	u32 l;
+
+	l = ('B' << 24) | ('M' << 16) | bootmode;
+
+	/*
+	 * Reserve the first word in scratchpad for communicating
+	 * with the boot ROM. A pointer to a data structure
+	 * describing the boot process can be stored there,
+	 * cf. OMAP34xx TRM, Initialization / Software Booting
+	 * Configuration.
+	 *
+	 * XXX This should use some omap_ctrl_writel()-type function
+	 */
+	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+}
+
+#endif
+
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 /*
  * Clears the scratchpad contents in case of cold boot-