[ARM] omap: don't use clkops_omap2_dflt_wait for non-ICLK/FCLK clocks

The original code in omap2_clk_wait_ready() used to check the low 8
bits to determine whether they were within the FCLKEN or ICLKEN
registers.  Specifically, the test is satisfied when these offsets
are used:

 CM_FCLKEN, CM_FCLKEN1, CM_CLKEN, OMAP24XX_CM_FCLKEN2, CM_ICLKEN,
 CM_ICLKEN1, CM_ICLKEN2, CM_ICLKEN3, OMAP24XX_CM_ICLKEN4
 OMAP3430_CM_CLKEN_PLL, OMAP3430ES2_CM_CLKEN2

If one of these offsets isn't used, omap2_clk_wait_ready() merely
returns without doing anything.  So we should use the non-wait clkops
version instead and eliminate that conditional.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 6 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 986c9f58275..76afb7b4482 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -228,14 +228,12 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	 * it and pull it into struct clk itself somehow.
 	 */
 	reg = clk->enable_reg;
-	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
-	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
-	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
-		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
-		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
-	else
-		return;
+
+	/*
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
+	 */
+	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
 	/* Check if both functional and interface clocks
 	 * are running. */