Merge branch 'depends/omap2_dss' into next/cleanup

Omap cleanups conflicted with omap2_dss work in a nontrivial
way, this is the most logical fixup.

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-apollon.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-rx51.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 180 insertions, 28 deletions

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 6a4fbb2b4aa..32a3a7fe0e9 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -38,6 +38,8 @@
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
 #include <video/omapdss.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 
 #include "mux.h"
@@ -52,6 +54,8 @@
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO	40
 
 #define GPIO_WIFI_PMENA		54
 #define GPIO_WIFI_IRQ		53
@@ -340,11 +344,6 @@ static int __init omap_ethernet_init(void)
 	return status;
 }
 
-static struct platform_device sdp4430_lcd_device = {
-	.name		= "sdp4430_lcd",
-	.id		= -1,
-};
-
 static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
 	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
 	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
@@ -374,21 +373,12 @@ static struct platform_device sdp4430_vbat = {
 };
 
 static struct platform_device *sdp4430_devices[] __initdata = {
-	&sdp4430_lcd_device,
 	&sdp4430_gpio_keys_device,
 	&sdp4430_leds_gpio,
 	&sdp4430_leds_pwm,
 	&sdp4430_vbat,
 };
 
-static struct omap_lcd_config sdp4430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
-};
-
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_OTG,
@@ -642,37 +632,202 @@ static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 	gpio_free(HDMI_GPIO_HPD);
 }
 
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.clocks	= {
-		.dispc	= {
+static struct nokia_dsi_panel_data dsi1_panel = {
+		.name		= "taal",
+		.reset_gpio	= 102,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 101,
+		.esd_interval	= 0,
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi1_panel,
+	.phy.dsi		= {
+		.clk_lane	= 1,
+		.clk_pol	= 0,
+		.data1_lane	= 2,
+		.data1_pol	= 0,
+		.data2_lane	= 3,
+		.data2_pol	= 0,
+
+		.module		= 0,
+	},
+
+	.clocks = {
+		.dispc = {
+			.channel = {
+				/* Logic Clock = 172.8 MHz */
+				.lck_div	= 1,
+				/* Pixel Clock = 34.56 MHz */
+				.pck_div	= 5,
+				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
+			},
 			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
 		},
-		.hdmi	= {
-			.regn	= 15,
-			.regm2	= 1,
+
+		.dsi = {
+			.regn		= 16,	/* Fint = 2.4 MHz */
+			.regm		= 180,	/* DDR Clock = 216 MHz */
+			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
+			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
+
+			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
+			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
+		},
+	},
+	.channel		= OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+		.name		= "taal",
+		.reset_gpio	= 104,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 103,
+		.esd_interval	= 0,
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+	.name			= "lcd2",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi2_panel,
+	.phy.dsi		= {
+		.clk_lane	= 1,
+		.clk_pol	= 0,
+		.data1_lane	= 2,
+		.data1_pol	= 0,
+		.data2_lane	= 3,
+		.data2_pol	= 0,
+
+		.module		= 1,
+	},
+
+	.clocks = {
+		.dispc = {
+			.channel = {
+				/* Logic Clock = 172.8 MHz */
+				.lck_div	= 1,
+				/* Pixel Clock = 34.56 MHz */
+				.pck_div	= 5,
+				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
+			},
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+
+		.dsi = {
+			.regn		= 16,	/* Fint = 2.4 MHz */
+			.regm		= 180,	/* DDR Clock = 216 MHz */
+			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
+			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
+
+			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
+			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
 		},
 	},
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+static void sdp4430_lcd_init(void)
+{
+	int r;
+
+	r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
+		"lcd1_reset_gpio");
+	if (r)
+		pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
+
+	r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
+		"lcd2_reset_gpio");
+	if (r)
+		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
+}
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
 	.platform_enable = sdp4430_panel_enable_hdmi,
 	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 };
 
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+	.picodlp_adapter_id	= 2,
+	.emu_done_gpio		= 44,
+	.pwrgood_gpio		= 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+	int r;
+	const struct gpio picodlp_gpios[] = {
+		{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+			"DLP POWER ON"},
+		{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+			"DLP EMU DONE"},
+		{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+			"DLP PWRGOOD"},
+	};
+
+	r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+	if (r)
+		pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DISPLAY_SEL_GPIO, 0);
+	gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+	return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DLP_POWER_ON_GPIO, 0);
+	gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+	.name			= "picodlp",
+	.driver_name		= "picodlp_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+	.platform_enable	= sdp4430_panel_enable_picodlp,
+	.platform_disable	= sdp4430_panel_disable_picodlp,
+	.data			= &sdp4430_picodlp_pdata,
+};
+
 static struct omap_dss_device *sdp4430_dss_devices[] = {
+	&sdp4430_lcd_device,
+	&sdp4430_lcd2_device,
 	&sdp4430_hdmi_device,
+	&sdp4430_picodlp_device,
 };
 
 static struct omap_dss_board_info sdp4430_dss_data = {
 	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
 	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_hdmi_device,
+	.default_device	= &sdp4430_lcd_device,
 };
 
-void omap_4430sdp_display_init(void)
+static void omap_4430sdp_display_init(void)
 {
+	int r;
+
+	/* Enable LCD2 by default (instead of Pico DLP) */
+	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+			"display_sel");
+	if (r)
+		pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+	sdp4430_lcd_init();
 	sdp4430_hdmi_mux_init();
+	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
 }
 
@@ -796,9 +951,6 @@ static void __init omap_4430sdp_init(void)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, NULL, package);
 
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
-
 	omap4_i2c_init();
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));