Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

36 files changed, 1510 insertions, 451 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 5f649637540..8d2f2daba0c 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,20 +152,11 @@ config MACH_NOKIA770
 config MACH_AMS_DELTA
 	bool "Amstrad E3 (Delta)"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select FIQ
 	help
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config AMS_DELTA_FIQ
-	bool "Fast Interrupt Request (FIQ) support for the E3"
-	depends on MACH_AMS_DELTA
-	select FIQ
-	help
-	  Provide a FIQ handler for the E3.
-	  This allows for fast handling of interrupts generated
-	  by the clock line of the E3 mailboard (or a PS/2 keyboard)
-	  connected to the GPIO based external keyboard port.
-
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9a304d854e3..6ee19504845 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -39,8 +39,8 @@ obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
-obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
-obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
+obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
+					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
@@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
 
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
+
 # LEDs support
 led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1d4163b9f0b..bd0495a9ac3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -28,6 +28,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
 #include <plat/keypad.h>
@@ -42,84 +43,82 @@
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
 
-static int ams_delta_keymap[] = {
+static const unsigned int ams_delta_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Advert    */
 
-	KEY(3, 0, KEY_COFFEE),		/* Games     */
-	KEY(2, 0, KEY_QUESTION),	/* Directory */
-	KEY(3, 2, KEY_CONNECT),		/* Internet  */
-	KEY(2, 1, KEY_SHOP),		/* Services  */
+	KEY(0, 3, KEY_COFFEE),		/* Games     */
+	KEY(0, 2, KEY_QUESTION),	/* Directory */
+	KEY(2, 3, KEY_CONNECT),		/* Internet  */
+	KEY(1, 2, KEY_SHOP),		/* Services  */
 	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
 
-	KEY(1, 0, KEY_DELETE),		/* Delete    */
+	KEY(0, 1, KEY_DELETE),		/* Delete    */
 	KEY(2, 2, KEY_PLAY),		/* Play      */
-	KEY(0, 1, KEY_PAGEUP),		/* Up        */
-	KEY(3, 1, KEY_PAGEDOWN),	/* Down      */
-	KEY(0, 2, KEY_EMAIL),		/* ReadEmail */
-	KEY(1, 2, KEY_STOP),		/* Stop      */
+	KEY(1, 0, KEY_PAGEUP),		/* Up        */
+	KEY(1, 3, KEY_PAGEDOWN),	/* Down      */
+	KEY(2, 0, KEY_EMAIL),		/* ReadEmail */
+	KEY(2, 1, KEY_STOP),		/* Stop      */
 
 	/* Numeric keypad portion */
-	KEY(7, 0, KEY_KP1),
-	KEY(6, 0, KEY_KP2),
-	KEY(5, 0, KEY_KP3),
-	KEY(7, 1, KEY_KP4),
-	KEY(6, 1, KEY_KP5),
-	KEY(5, 1, KEY_KP6),
-	KEY(7, 2, KEY_KP7),
-	KEY(6, 2, KEY_KP8),
-	KEY(5, 2, KEY_KP9),
-	KEY(6, 3, KEY_KP0),
-	KEY(7, 3, KEY_KPASTERISK),
-	KEY(5, 3, KEY_KPDOT),		/* # key     */
-	KEY(2, 7, KEY_NUMLOCK),		/* Mute      */
-	KEY(1, 7, KEY_KPMINUS),		/* Recall    */
-	KEY(1, 6, KEY_KPPLUS),		/* Redial    */
-	KEY(6, 7, KEY_KPSLASH),		/* Handsfree */
-	KEY(0, 6, KEY_ENTER),		/* Video     */
-
-	KEY(4, 7, KEY_CAMERA),		/* Photo     */
-
-	KEY(4, 0, KEY_F2),		/* Home      */
-	KEY(4, 1, KEY_F3),		/* Office    */
-	KEY(4, 2, KEY_F4),		/* Mobile    */
+	KEY(0, 7, KEY_KP1),
+	KEY(0, 6, KEY_KP2),
+	KEY(0, 5, KEY_KP3),
+	KEY(1, 7, KEY_KP4),
+	KEY(1, 6, KEY_KP5),
+	KEY(1, 5, KEY_KP6),
+	KEY(2, 7, KEY_KP7),
+	KEY(2, 6, KEY_KP8),
+	KEY(2, 5, KEY_KP9),
+	KEY(3, 6, KEY_KP0),
+	KEY(3, 7, KEY_KPASTERISK),
+	KEY(3, 5, KEY_KPDOT),		/* # key     */
+	KEY(7, 2, KEY_NUMLOCK),		/* Mute      */
+	KEY(7, 1, KEY_KPMINUS),		/* Recall    */
+	KEY(6, 1, KEY_KPPLUS),		/* Redial    */
+	KEY(7, 6, KEY_KPSLASH),		/* Handsfree */
+	KEY(6, 0, KEY_ENTER),		/* Video     */
+
+	KEY(7, 4, KEY_CAMERA),		/* Photo     */
+
+	KEY(0, 4, KEY_F2),		/* Home      */
+	KEY(1, 4, KEY_F3),		/* Office    */
+	KEY(2, 4, KEY_F4),		/* Mobile    */
 	KEY(7, 7, KEY_F5),		/* SMS       */
-	KEY(5, 7, KEY_F6),		/* Email     */
+	KEY(7, 5, KEY_F6),		/* Email     */
 
 	/* QWERTY portion of keypad */
-	KEY(4, 3, KEY_Q),
+	KEY(3, 4, KEY_Q),
 	KEY(3, 3, KEY_W),
-	KEY(2, 3, KEY_E),
-	KEY(1, 3, KEY_R),
-	KEY(0, 3, KEY_T),
-	KEY(7, 4, KEY_Y),
-	KEY(6, 4, KEY_U),
-	KEY(5, 4, KEY_I),
+	KEY(3, 2, KEY_E),
+	KEY(3, 1, KEY_R),
+	KEY(3, 0, KEY_T),
+	KEY(4, 7, KEY_Y),
+	KEY(4, 6, KEY_U),
+	KEY(4, 5, KEY_I),
 	KEY(4, 4, KEY_O),
-	KEY(3, 4, KEY_P),
+	KEY(4, 3, KEY_P),
 
-	KEY(2, 4, KEY_A),
-	KEY(1, 4, KEY_S),
-	KEY(0, 4, KEY_D),
-	KEY(7, 5, KEY_F),
-	KEY(6, 5, KEY_G),
+	KEY(4, 2, KEY_A),
+	KEY(4, 1, KEY_S),
+	KEY(4, 0, KEY_D),
+	KEY(5, 7, KEY_F),
+	KEY(5, 6, KEY_G),
 	KEY(5, 5, KEY_H),
-	KEY(4, 5, KEY_J),
-	KEY(3, 5, KEY_K),
-	KEY(2, 5, KEY_L),
+	KEY(5, 4, KEY_J),
+	KEY(5, 3, KEY_K),
+	KEY(5, 2, KEY_L),
 
-	KEY(1, 5, KEY_Z),
-	KEY(0, 5, KEY_X),
-	KEY(7, 6, KEY_C),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 0, KEY_X),
+	KEY(6, 7, KEY_C),
 	KEY(6, 6, KEY_V),
-	KEY(5, 6, KEY_B),
-	KEY(4, 6, KEY_N),
-	KEY(3, 6, KEY_M),
-	KEY(2, 6, KEY_SPACE),
+	KEY(6, 5, KEY_B),
+	KEY(6, 4, KEY_N),
+	KEY(6, 3, KEY_M),
+	KEY(6, 2, KEY_SPACE),
 
-	KEY(0, 7, KEY_LEFTSHIFT),	/* Vol up    */
-	KEY(3, 7, KEY_LEFTCTRL),	/* Vol down  */
-
-	0
+	KEY(7, 0, KEY_LEFTSHIFT),	/* Vol up    */
+	KEY(7, 3, KEY_LEFTCTRL),	/* Vol down  */
 };
 
 void ams_delta_latch1_write(u8 mask, u8 value)
@@ -140,7 +139,6 @@ static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
@@ -189,11 +187,15 @@ static struct resource ams_delta_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data ams_delta_keymap_data = {
+	.keymap		= ams_delta_keymap,
+	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
+};
+
 static struct omap_kp_platform_data ams_delta_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap 	= ams_delta_keymap,
-	.keymapsize	= ARRAY_SIZE(ams_delta_keymap),
+	.keymap_data	= &ams_delta_keymap_data,
 	.delay		= 9,
 };
 
@@ -307,16 +309,14 @@ static void __init ams_delta_init(void)
 #endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
-#ifdef CONFIG_AMS_DELTA_FIQ
 	ams_delta_init_fiq();
-#endif
 
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
 	{
-		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.membase	= IOMEM(AMS_DELTA_MODEM_VIRT),
 		.mapbase	= AMS_DELTA_MODEM_PHYS,
 		.irq		= -EINVAL, /* changed later */
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -340,6 +340,9 @@ static int __init ams_delta_modem_init(void)
 {
 	int err;
 
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
 	omap_cfg_reg(M14_1510_GPIO2);
 	ams_delta_modem_ports[0].irq =
 			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 149fdd32e12..0efb9dbae44 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -69,36 +69,35 @@
 #define fsample_cpld_clear(bit) \
     fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
 
-static int fsample_keymap[] = {
-	KEY(0,0,KEY_UP),
-	KEY(0,1,KEY_RIGHT),
-	KEY(0,2,KEY_LEFT),
-	KEY(0,3,KEY_DOWN),
-	KEY(0,4,KEY_ENTER),
-	KEY(1,0,KEY_F10),
-	KEY(1,1,KEY_SEND),
-	KEY(1,2,KEY_END),
-	KEY(1,3,KEY_VOLUMEDOWN),
-	KEY(1,4,KEY_VOLUMEUP),
-	KEY(1,5,KEY_RECORD),
-	KEY(2,0,KEY_F9),
-	KEY(2,1,KEY_3),
-	KEY(2,2,KEY_6),
-	KEY(2,3,KEY_9),
-	KEY(2,4,KEY_KPDOT),
-	KEY(3,0,KEY_BACK),
-	KEY(3,1,KEY_2),
-	KEY(3,2,KEY_5),
-	KEY(3,3,KEY_8),
-	KEY(3,4,KEY_0),
-	KEY(3,5,KEY_KPSLASH),
-	KEY(4,0,KEY_HOME),
-	KEY(4,1,KEY_1),
-	KEY(4,2,KEY_4),
-	KEY(4,3,KEY_7),
-	KEY(4,4,KEY_KPASTERISK),
-	KEY(4,5,KEY_POWER),
-	0
+static const unsigned int fsample_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_LEFT),
+	KEY(3, 0, KEY_DOWN),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_F10),
+	KEY(1, 1, KEY_SEND),
+	KEY(2, 1, KEY_END),
+	KEY(3, 1, KEY_VOLUMEDOWN),
+	KEY(4, 1, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_RECORD),
+	KEY(0, 2, KEY_F9),
+	KEY(1, 2, KEY_3),
+	KEY(2, 2, KEY_6),
+	KEY(3, 2, KEY_9),
+	KEY(4, 2, KEY_KPDOT),
+	KEY(0, 3, KEY_BACK),
+	KEY(1, 3, KEY_2),
+	KEY(2, 3, KEY_5),
+	KEY(3, 3, KEY_8),
+	KEY(4, 3, KEY_0),
+	KEY(5, 3, KEY_KPSLASH),
+	KEY(0, 4, KEY_HOME),
+	KEY(1, 4, KEY_1),
+	KEY(2, 4, KEY_4),
+	KEY(3, 4, KEY_7),
+	KEY(4, 4, KEY_KPASTERISK),
+	KEY(5, 4, KEY_POWER),
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -120,6 +119,15 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static void __init fsample_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
 static struct mtd_partition nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -244,11 +252,15 @@ static struct resource kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data fsample_keymap_data = {
+	.keymap		= fsample_keymap,
+	.keymap_size	= ARRAY_SIZE(fsample_keymap),
+};
+
 static struct omap_kp_platform_data kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= fsample_keymap,
-	.keymapsize	= ARRAY_SIZE(fsample_keymap),
+	.keymap_data	= &fsample_keymap_data,
 	.delay		= 4,
 };
 
@@ -285,6 +297,8 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
+	fsample_init_smc91x();
+
 	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
 	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
@@ -312,21 +326,10 @@ static void __init omap_fsample_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init fsample_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	fsample_init_smc91x();
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 197adb49dc5..28b84aa9bdb 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -52,43 +52,42 @@
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
 
-static int h2_keymap[] = {
+static const unsigned int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F10),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_9),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_2),
-	KEY(1, 3, KEY_F9),
-	KEY(1, 4, KEY_F7),
-	KEY(1, 5, KEY_0),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_6),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
 	KEY(2, 2, KEY_1),
-	KEY(2, 3, KEY_F2),
-	KEY(2, 4, KEY_F6),
-	KEY(2, 5, KEY_HOME),
-	KEY(3, 0, KEY_8),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_F12),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
 	KEY(3, 3, KEY_F3),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_END),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_F11),
-	KEY(4, 3, KEY_F1),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
 	KEY(4, 4, KEY_F4),
-	KEY(4, 5, KEY_ESC),
-	KEY(5, 0, KEY_F13),
-	KEY(5, 1, KEY_F14),
-	KEY(5, 2, KEY_F15),
-	KEY(5, 3, KEY_F16),
-	KEY(5, 4, KEY_SLEEP),
-	0
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
 };
 
 static struct mtd_partition h2_nor_partitions[] = {
@@ -270,14 +269,18 @@ static struct resource h2_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data h2_keymap_data = {
+	.keymap		= h2_keymap,
+	.keymap_size	= ARRAY_SIZE(h2_keymap),
+};
+
 static struct omap_kp_platform_data h2_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= h2_keymap,
-	.keymapsize	= ARRAY_SIZE(h2_keymap),
-	.rep		= 1,
+	.keymap_data	= &h2_keymap_data,
+	.rep		= true,
 	.delay		= 9,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device h2_kp_device = {
@@ -374,8 +377,6 @@ static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h2_init_smc91x();
 }
 
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -403,6 +404,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 static void __init h2_init(void)
 {
+	h2_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9126e3e37b4..dbc8b8d882b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -56,43 +56,42 @@
 
 #define H3_TS_GPIO	48
 
-static int h3_keymap[] = {
+static const unsigned int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F10),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_9),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_2),
-	KEY(1, 3, KEY_F9),
-	KEY(1, 4, KEY_F7),
-	KEY(1, 5, KEY_0),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_6),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
 	KEY(2, 2, KEY_1),
-	KEY(2, 3, KEY_F2),
-	KEY(2, 4, KEY_F6),
-	KEY(2, 5, KEY_HOME),
-	KEY(3, 0, KEY_8),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_F12),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
 	KEY(3, 3, KEY_F3),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_END),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_F11),
-	KEY(4, 3, KEY_F1),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
 	KEY(4, 4, KEY_F4),
-	KEY(4, 5, KEY_ESC),
-	KEY(5, 0, KEY_F13),
-	KEY(5, 1, KEY_F14),
-	KEY(5, 2, KEY_F15),
-	KEY(5, 3, KEY_F16),
-	KEY(5, 4, KEY_SLEEP),
-	0
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
 };
 
 
@@ -264,6 +263,15 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (gpio_request(40, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+}
+
 #define GPTIMER_BASE		0xFFFB1400
 #define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
 #define GPTIMER_REGS_SIZE	0x46
@@ -296,14 +304,18 @@ static struct resource h3_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data h3_keymap_data = {
+	.keymap		= h3_keymap,
+	.keymap_size	= ARRAY_SIZE(h3_keymap),
+};
+
 static struct omap_kp_platform_data h3_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= h3_keymap,
-	.keymapsize	= ARRAY_SIZE(h3_keymap),
-	.rep		= 1,
+	.keymap_data	= &h3_keymap_data,
+	.rep		= true,
 	.delay		= 9,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device h3_kp_device = {
@@ -376,6 +388,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 
 static void __init h3_init(void)
 {
+	h3_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
@@ -422,21 +436,10 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h3_init_smc91x();
 }
 
 static void __init h3_map_io(void)
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 071af3e4778..f2c5c585bc8 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -180,64 +180,68 @@
 
 /* Keyboard definition */
 
-static int htc_herald_keymap[] = {
+static const unsigned int htc_herald_keymap[] = {
 	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(0, 1, KEY_CAMERA), /* Camera */
-	KEY(0, 2, KEY_PHONE), /* Send key */
-	KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
-	KEY(0, 4, KEY_F2),  /* Right bar (landscape) */
-	KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
-	KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
-	KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 0, KEY_CAMERA), /* Camera */
+	KEY(2, 0, KEY_PHONE), /* Send key */
+	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
+	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
+	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
+	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
 	KEY(1, 1, KEY_COMMA),
-	KEY(1, 2, KEY_M),
-	KEY(1, 3, KEY_K),
-	KEY(1, 4, KEY_SLASH), /* OK key */
-	KEY(1, 5, KEY_I),
-	KEY(1, 6, KEY_U),
-	KEY(2, 0, KEY_LEFTALT),
-	KEY(2, 1, KEY_TAB),
+	KEY(2, 1, KEY_M),
+	KEY(3, 1, KEY_K),
+	KEY(4, 1, KEY_SLASH), /* OK key */
+	KEY(5, 1, KEY_I),
+	KEY(6, 1, KEY_U),
+	KEY(0, 2, KEY_LEFTALT),
+	KEY(1, 2, KEY_TAB),
 	KEY(2, 2, KEY_N),
-	KEY(2, 3, KEY_J),
-	KEY(2, 4, KEY_ENTER),
-	KEY(2, 5, KEY_H),
-	KEY(2, 6, KEY_Y),
-	KEY(3, 0, KEY_SPACE),
-	KEY(3, 1, KEY_L),
-	KEY(3, 2, KEY_B),
+	KEY(3, 2, KEY_J),
+	KEY(4, 2, KEY_ENTER),
+	KEY(5, 2, KEY_H),
+	KEY(6, 2, KEY_Y),
+	KEY(0, 3, KEY_SPACE),
+	KEY(1, 3, KEY_L),
+	KEY(2, 3, KEY_B),
 	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_BACKSPACE),
-	KEY(3, 5, KEY_G),
-	KEY(3, 6, KEY_T),
-	KEY(4, 0, KEY_CAPSLOCK), /* Shift */
-	KEY(4, 1, KEY_C),
-	KEY(4, 2, KEY_F),
-	KEY(4, 3, KEY_R),
+	KEY(4, 3, KEY_BACKSPACE),
+	KEY(5, 3, KEY_G),
+	KEY(6, 3, KEY_T),
+	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
+	KEY(1, 4, KEY_C),
+	KEY(2, 4, KEY_F),
+	KEY(3, 4, KEY_R),
 	KEY(4, 4, KEY_O),
-	KEY(4, 5, KEY_E),
-	KEY(4, 6, KEY_D),
-	KEY(5, 0, KEY_X),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_S),
-	KEY(5, 3, KEY_W),
-	KEY(5, 4, KEY_P),
+	KEY(5, 4, KEY_E),
+	KEY(6, 4, KEY_D),
+	KEY(0, 5, KEY_X),
+	KEY(1, 5, KEY_Z),
+	KEY(2, 5, KEY_S),
+	KEY(3, 5, KEY_W),
+	KEY(4, 5, KEY_P),
 	KEY(5, 5, KEY_Q),
-	KEY(5, 6, KEY_A),
-	KEY(6, 0, KEY_CONNECT), /* Voice button */
-	KEY(6, 2, KEY_CANCEL), /* End key */
-	KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(6, 4, KEY_F1), /* Left bar (landscape) */
-	KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 5, KEY_A),
+	KEY(0, 6, KEY_CONNECT), /* Voice button */
+	KEY(2, 6, KEY_CANCEL), /* End key */
+	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
+	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
 	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-	0
 };
 
-struct omap_kp_platform_data htcherald_kp_data = {
+static const struct matrix_keymap_data htc_herald_keymap_data = {
+	.keymap		= htc_herald_keymap,
+	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
+};
+
+static struct omap_kp_platform_data htcherald_kp_data = {
 	.rows	= 7,
 	.cols	= 7,
 	.delay = 20,
-	.rep = 1,
-	.keymap = htc_herald_keymap,
+	.rep = true,
+	.keymap_data = &htc_herald_keymap_data,
 };
 
 static struct resource kp_resources[] = {
@@ -278,7 +282,7 @@ static struct gpio_keys_button herald_gpio_keys_table[] = {
 static struct gpio_keys_platform_data herald_gpio_keys_data = {
 	.buttons	= herald_gpio_keys_table,
 	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= 1,
+	.rep		= true,
 };
 
 static struct platform_device herald_gpiokeys_device = {
@@ -439,7 +443,7 @@ static const struct ads7846_platform_data htcherald_ts_platform_data = {
 	.keep_vref_on		= 1,
 	.x_plate_ohms		= 496,
 	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 100000,
+	.pressure_max		= 10000,
 	.pressure_min		= 5000,
 	.x_min			= 528,
 	.x_max			= 3760,
@@ -577,8 +581,6 @@ static void __init htcherald_init(void)
 	printk(KERN_INFO "HTC Herald init.\n");
 
 	/* Do board initialization before we register all the devices */
-	omap_gpio_init();
-
 	omap_board_config = htcherald_config;
 	omap_board_config_size = ARRAY_SIZE(htcherald_config);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index dc2b86fd66c..a36e6742bf9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -44,17 +44,16 @@
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #def