Merge branch '7xx-iosplit-plat' with omap-fixes

47 files changed, 559 insertions, 389 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8ad5cc3e83e..7fc11c34b69 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -25,13 +25,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b9322..f4b72c1654f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
 
@@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -196,8 +196,8 @@ static struct platform_device smc91x_device = {
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6c8a41f20e5..e1195a3467b 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,10 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 46098f54682..b30c4990744 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index aab860307dc..89ba8ec4bbf 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,14 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include "board-h2.h"
 
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 5e8877ce35e..54b0f063e26 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 89586b80b8d..f5cc0a73052 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -40,13 +40,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/common.h>
 
 #include "board-h3.h"
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cd6c3951482..cf0fdb9c182 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -30,14 +30,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ed2a48a9ce7..5a275bab2df 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/dsp_common.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
-#include <mach/lcd_mipid.h>
-#include <mach/mmc.h>
-#include <mach/clock.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/dsp_common.h>
+#include <plat/omapfb.h>
+#include <plat/hwa742.h>
+#include <plat/lcd_mipid.h>
+#include <plat/mmc.h>
+#include <plat/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ed891b8a6b1..50c92c13e48 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -47,10 +47,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/common.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/common.h>
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <mach/keypad.h>
+#include <plat/keypad.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4de258420f3..9fe887262bd 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,14 +34,14 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/dma.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d972cf941b7..af068e3e0fe 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -29,16 +29,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/led.h>
+#include <plat/led.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 986bd4df0e9..c7a3b6f3650 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -33,15 +33,15 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/omap-alsa.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f31..ca7df1e93ef 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
@@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -163,8 +163,8 @@ static struct platform_device smc91x_device = {
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 58a46e4e45c..5b33ae8141b 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -15,9 +15,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/board-sx1.h>
+#include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 056ae64e0f5..7a97fac83d8 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -33,15 +33,15 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/board-sx1.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 07b07522d5b..35c75c1bd0a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -29,11 +29,11 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 436eed22801..b4fec9a6e89 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -22,10 +22,10 @@
 #include <asm/mach-types.h>
 #include <asm/clkdev.h>
 
-#include <mach/cpu.h>
-#include <mach/usb.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/usb.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 static const struct clkops clkops_generic;
 static const struct clkops clkops_uart;
@@ -69,13 +69,13 @@ struct omap_clk {
 	}
 
 #define CK_310	(1 << 0)
-#define CK_730	(1 << 1)
+#define CK_7XX	(1 << 1)
 #define CK_1510	(1 << 2)
 #define CK_16XX	(1 << 3)
 
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN1 clocks */
 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
@@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
@@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
 	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
 	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
@@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
 	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
 	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
 	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
 	/* ULPD clocks */
 	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
@@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
 	 * (on 730, bit 13 must always be 1)
 	 */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
 	else
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
@@ -783,8 +783,8 @@ int __init omap1_clk_init(void)
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())
 		cpu_mask |= CK_1510;
-	if (cpu_is_omap730())
-		cpu_mask |= CK_730;
+	if (cpu_is_omap7xx())
+		cpu_mask |= CK_7XX;
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
@@ -800,7 +800,7 @@ int __init omap1_clk_init(void)
 			crystal_type = info->system_clock_type;
 	}
 
-#if defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	ck_ref.rate = 13000000;
 #elif defined(CONFIG_ARCH_OMAP16XX)
 	if (crystal_type == 2)
@@ -847,7 +847,7 @@ int __init omap1_clk_init(void)
 		printk(KERN_ERR "System frequencies not set. Check your config.\n");
 		/* Guess sane values (60MHz) */
 		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
 	}
 #endif
@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
 
 #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
 	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+	omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
 #endif
 
 	/* Amstrad Delta wants BCLK high when inactive */
@@ -873,7 +873,7 @@ int __init omap1_clk_init(void)
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
 	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
 	else
 		omap_wr