Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...

11 files changed, 13 insertions, 2456 deletions

diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 908bf9a567f..6ce21a26412 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,12 +1,9 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
deleted file mode 100644
index e3ac52c3401..00000000000
--- a/arch/arm/mach-mxs/clock-mx23.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "regs-clkctrl-mx23.h"
-
-#define CLKCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static int pll_clk_enable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
-
-	/* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
-	 * and is incorrect (excessive). Per definition of the PLLCTRL0
-	 * POWER field, waiting at least 10us.
-	 */
-	udelay(10);
-
-	return 0;
-}
-
-static void pll_clk_disable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
-}
-
-static struct clk pll_clk = {
-	 .get_rate = pll_clk_get_rate,
-	 .enable = pll_clk_enable,
-	 .disable = pll_clk_disable,
-	 .parent = &ref_xtal_clk,
-};
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
-_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
-_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp_clk, SSP)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, PIX)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(audio_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-
-/*
- * clk_set_rate
- */
-static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, bm_busy, div_max, d, f, div, frac;
-	unsigned long diff, parent_rate, calc_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &ref_xtal_clk) {
-		div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
-		div = DIV_ROUND_UP(parent_rate, rate);
-		if (div == 0 || div > div_max)
-			return -EINVAL;
-	} else {
-		div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
-		rate >>= PARENT_RATE_SHIFT;
-		parent_rate >>= PARENT_RATE_SHIFT;
-		diff = parent_rate;
-		div = frac = 1;
-		for (d = 1; d <= div_max; d++) {
-			f = parent_rate * 18 / d / rate;
-			if ((parent_rate * 18 / d) % rate)
-				f++;
-			if (f < 18 || f > 35)
-				continue;
-
-			calc_rate = parent_rate * 18 / f / d;
-			if (calc_rate > rate)
-				continue;
-
-			if (rate - calc_rate < diff) {
-				frac = f;
-				div = d;
-				diff = rate - calc_rate;
-			}
-
-			if (diff == 0)
-				break;
-		}
-
-		if (diff == parent_rate)
-			return -EINVAL;
-
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-		reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
-		reg |= frac;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	}
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-	reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
-	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-
-	mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
-
-	return 0;
-}
-
-#define _CLK_SET_RATE(name, dr)						\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);	\
-	return 0;							\
-}
-
-_CLK_SET_RATE(xbus_clk, XBUS)
-_CLK_SET_RATE(ssp_clk, SSP)
-_CLK_SET_RATE(gpmi_clk, GPMI)
-_CLK_SET_RATE(lcdif_clk, PIX)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(audio_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp_clk, SSP)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(lcdif_clk, PIX)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(audio_clk)
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
-	_REGISTER_CLOCK(NULL, "audio", audio_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
-			&ref_xtal_clk : &ref_io_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_io_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
-			&ref_xtal_clk : &ref_pix_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-	reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-	reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac to get a 288 MHz ref_io.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-
-	return ret;
-}
-
-int __init mx23_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp_clk, &ref_io_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
deleted file mode 100644
index cea29c99e21..00000000000
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-#include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/digctl.h>
-
-#include "regs-clkctrl-mx28.h"
-
-#define CLKCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static struct clk pll2_clk;
-static struct clk cpu_clk;
-static struct clk emi_clk;
-static struct clk saif0_clk;
-static struct clk saif1_clk;
-static struct clk clk32k_clk;
-static DEFINE_SPINLOCK(clkmux_lock);
-
-/*
- * HW_SAIF_CLKMUX_SEL:
- *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
- *		clock pins selected for SAIF1 input clocks.
- *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
- *		SAIF0 clock inputs selected for SAIF1 input clocks.
- *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- */
-int mxs_saif_clkmux_select(unsigned int clkmux)
-{
-	if (clkmux > 0x3)
-		return -EINVAL;
-
-	spin_lock(&clkmux_lock);
-	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
-	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
-	spin_unlock(&clkmux_lock);
-
-	return 0;
-}
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll0_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll1_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll2_clk_get_rate(struct clk *clk)
-{
-	return 50000000;
-}
-
-#define _CLK_ENABLE_PLL(name, r, g)					\
-static int name##_enable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	udelay(10);							\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-									\
-	return 0;							\
-}
-
-_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _CLK_DISABLE_PLL(name, r, g)					\
-static void name##_disable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-}
-
-_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _DEFINE_CLOCK_PLL(name)						\
-	static struct clk name = {					\
-		.get_rate	= name##_get_rate,			\
-		.enable		= name##_enable,			\
-		.disable	= name##_disable,			\
-		.parent		= &ref_xtal_clk,			\
-	}
-
-_DEFINE_CLOCK_PLL(pll0_clk);
-_DEFINE_CLOCK_PLL(pll1_clk);
-_DEFINE_CLOCK_PLL(pll2_clk);
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
-_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
-_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
-_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll0_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
-_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
-_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
-_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long lradc_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 16;
-}
-
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-static unsigned long spdif_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	if (clk == &saif0_clk || clk == &saif1_clk)			\
-		return clk_get_rate(clk->parent) >> 16 * div;		\
-	else								\
-		return clk_get_rate(clk->parent) / div;			\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp0_clk, SSP0)
-_CLK_GET_RATE1(ssp1_clk, SSP1)
-_CLK_GET_RATE1(ssp2_clk, SSP2)
-_CLK_GET_RATE1(ssp3_clk, SSP3)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
-_CLK_GET_RATE1(saif0_clk, SAIF0)
-_CLK_GET_RATE1(saif1_clk, SAIF1)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-_CLK_GET_RATE_STUB(can0_clk)
-_CLK_GET_RATE_STUB(can1_clk)
-_CLK_GET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_rate
- */
-/* fool compiler */
-#define BM_CLKCTRL_CPU_DIV	0
-#define BP_CLKCTRL_CPU_DIV	0
-#define BM_CLKCTRL_CPU_BUSY	0
-
-#define _CLK_SET_RATE(name, dr, fr, fs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, bm_busy, div_max, d, f, div, frac;			\
-	unsigned long diff, parent_rate, calc_rate;			\
-									\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
-									\
-	if (clk->parent == &ref_xtal_clk) {				\
-		parent_rate = clk_get_rate(clk->parent);		\
-		div = DIV_ROUND_UP(parent_rate, rate);			\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
-				BP_CLKCTRL_CPU_DIV_XTAL;		\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;		\
-		}							\
-		if (div == 0 || div > div_max)				\
-			return -EINVAL;					\
-	} else {							\
-		/*							\
-		 * hack alert: this block modifies clk->parent, too,	\
-		 * so the base to use it the grand parent.		\
-		 */							\
-		parent_rate = clk_get_rate(clk->parent->parent);	\
-		rate >>= PARENT_RATE_SHIFT;				\
-		parent_rate >>= PARENT_RATE_SHIFT;			\
-		diff = parent_rate;					\
-		div = frac = 1;						\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_CPU >>		\
-				BP_CLKCTRL_CPU_DIV_CPU;			\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;		\
-		}							\
-		for (d = 1; d <= div_max; d++) {			\
-			f = parent_rate * 18 / d / rate;		\
-			if ((parent_rate * 18 / d) % rate)		\
-				f++;					\
-			if (f < 18 || f > 35)				\
-				continue;				\
-									\
-			calc_rate = parent_rate * 18 / f / d;		\
-			if (calc_rate > rate)				\
-				continue;				\
-									\
-			if (rate - calc_rate < diff) {			\
-				frac = f;				\
-				div = d;				\
-				diff = rate - calc_rate;		\
-			}						\
-									\
-			if (diff == 0)					\
-				break;					\
-		}							\
-									\
-		if (diff == parent_rate)				\
-			return -EINVAL;					\
-									\
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-		reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;			\
-		reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC;		\
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-	}								\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	if (clk == &cpu_clk) {						\
-		reg &= ~BM_CLKCTRL_CPU_DIV_CPU;				\
-		reg |= div << BP_CLKCTRL_CPU_DIV_CPU;			\
-	} else {							\
-		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
-		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg & (1 << clk->enable_shift)) {			\
-			pr_err("%s: clock is gated\n", __func__);	\
-			return -EINVAL;					\
-		}							\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy);		\
-}
-
-_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
-_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
-_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
-_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
-_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
-_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
-_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
-
-#define _CLK_SET_RATE1(name, dr)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
-}
-
-_CLK_SET_RATE1(xbus_clk, XBUS)
-
-/* saif clock uses 16 bits frac div */
-#define _CLK_SET_RATE_SAIF(name, rs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u16 div;							\
-	u32 reg;							\
-	u64 lrate;							\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	if (rate > parent_rate)						\
-		return -EINVAL;						\
-									\
-	lrate = (u64)rate << 16;