Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc device tree updates from Olof Johansson:
 "Device tree conversion and enablement branch.  Mostly a bunch of new
  bindings and setup for various platforms, but the Via/Winchip VT8500
  platform is also converted over from being 100% legacy to now use
  device tree for probing.  More of that will come for 3.8."

Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
  arm: vt8500: Fixup for missing gpio.h
  ARM: LPC32xx: LED fix in PHY3250 DTS file
  ARM: dt: mmp-dma: add binding file
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ...

1 files changed, 128 insertions, 12 deletions

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index ff886e01a0b..cf43e5effb9 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -12,8 +12,10 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/can/platform/flexcan.h>
+#include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
 #include <linux/micrel_phy.h>
@@ -21,9 +23,12 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
+#include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/mxs.h>
 
 static struct fb_videomode mx23evk_video_modes[] = {
 	{
@@ -99,9 +104,40 @@ static struct fb_videomode apx4devkit_video_modes[] = {
 
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
 
+/*
+ * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
+ */
+#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
+
+static int flexcan0_en, flexcan1_en;
+
+static void mx28evk_flexcan_switch(void)
+{
+	if (flexcan0_en || flexcan1_en)
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
+	else
+		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
+}
+
+static void mx28evk_flexcan0_switch(int enable)
+{
+	flexcan0_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static void mx28evk_flexcan1_switch(int enable)
+{
+	flexcan1_en = enable;
+	mx28evk_flexcan_switch();
+}
+
+static struct flexcan_platform_data flexcan_pdata[2];
+
 static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
 	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
+	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
 	{ /* sentinel */ }
 };
 
@@ -237,13 +273,21 @@ static void __init imx28_evk_init(void)
 	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
 	mxsfb_pdata.default_bpp = 32;
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
-static void __init m28evk_init(void)
+static void __init imx28_evk_post_init(void)
 {
-	enable_clk_enet_out();
-	update_fec_mac_prop(OUI_DENX);
+	if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
+			      "flexcan-switch")) {
+		flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
+		flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
+	}
+}
 
+static void __init m28evk_init(void)
+{
 	mxsfb_pdata.mode_list = m28evk_video_modes;
 	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
 	mxsfb_pdata.default_bpp = 16;
@@ -270,6 +314,80 @@ static void __init apx4devkit_init(void)
 	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
 
+#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
+#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
+#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
+#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
+#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
+#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
+#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
+#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
+#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
+
+#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
+#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
+
+static const struct gpio tx28_gpios[] __initconst = {
+	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
+	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
+	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
+	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
+	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
+	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
+	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
+	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
+	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
+	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
+	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
+};
+
+static void __init tx28_post_init(void)
+{
+	struct device_node *np;
+	struct platform_device *pdev;
+	struct pinctrl *pctl;
+	int ret;
+
+	enable_clk_enet_out();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_err("%s: failed to find fec device\n", __func__);
+		return;
+	}
+
+	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
+	if (IS_ERR(pctl)) {
+		pr_err("%s: failed to get pinctrl state\n", __func__);
+		return;
+	}
+
+	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
+	if (ret) {
+		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
+		return;
+	}
+
+	/* Power up fec phy */
+	gpio_set_value(TX28_FEC_PHY_POWER, 1);
+	msleep(26); /* 25ms according to data sheet */
+
+	/* Mode strap pins */
+	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
+	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
+	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
+
+	udelay(100); /* minimum assertion time for nRST */
+
+	/* Deasserting FEC PHY RESET */
+	gpio_set_value(TX28_FEC_PHY_RESET, 1);
+
+	pinctrl_put(pctl);
+}
+
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -283,22 +401,20 @@ static void __init mxs_machine_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);
+
+	if (of_machine_is_compatible("karo,tx28"))
+		tx28_post_init();
+
+	if (of_machine_is_compatible("fsl,imx28-evk"))
+		imx28_evk_post_init();
 }
 
 static const char *imx23_dt_compat[] __initdata = {
-	"fsl,imx23-evk",
-	"fsl,stmp378x_devb"
-	"olimex,imx23-olinuxino",
 	"fsl,imx23",
 	NULL,
 };
 
 static const char *imx28_dt_compat[] __initdata = {
-	"bluegiga,apx4devkit",
-	"crystalfontz,cfa10036",
-	"denx,m28evk",
-	"fsl,imx28-evk",
-	"karo,tx28",
 	"fsl,imx28",
 	NULL,
 };