Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

26 files changed, 1276 insertions, 344 deletions

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 0717f887cba..340809a7d23 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -94,6 +94,7 @@ config MACH_MX31_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -183,6 +184,7 @@ config MACH_MX35_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -199,6 +201,15 @@ config MACH_KZM_ARM11_01
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
 	select SOC_IMX35
@@ -229,4 +240,18 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 
 endchoice
 
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8db13294ad2..a54faf2cf5f 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,8 +5,8 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
@@ -20,5 +20,7 @@ obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG)		+= mach-bug.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_VPR200)	+= mach-vpr200.o
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 677b18aa7ae..d545d86cc20 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -35,7 +35,7 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
-#define imx31_add_imx_keypad(pdata)	\
+#define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
 extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c
new file mode 100644
index 00000000000..314a983ac61
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx31.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c
new file mode 100644
index 00000000000..33983a478c6
--- /dev/null
+++ b/arch/arm/mach-mx3/ehci-imx35.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 14a5ffc939a..80761474c0f 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -165,8 +165,8 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define GPIO_LED1	(2 * 32 + 29)
-#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LED1	IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR	(4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c
index a1d7fa5123d..cf8f8099ebd 100644
--- a/arch/arm/mach-mx3/iomux-imx31.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -97,7 +97,7 @@ EXPORT_SYMBOL(mxc_iomux_set_pad);
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
  */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -118,10 +118,10 @@ int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
 }
 EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 	int ret = -EINVAL;
 
@@ -139,7 +139,7 @@ setup_error:
 }
 EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
-void mxc_iomux_release_pin(const unsigned int pin)
+void mxc_iomux_release_pin(unsigned int pin)
 {
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
@@ -148,9 +148,9 @@ void mxc_iomux_release_pin(const unsigned int pin)
 }
 EXPORT_SYMBOL(mxc_iomux_release_pin);
 
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
-	unsigned int *p = pin_list;
+	const unsigned int *p = pin_list;
 	int i;
 
 	for (i = 0; i < count; i++) {
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 28b6f414b5d..226829bf7c2 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -133,7 +133,6 @@ static int armadillo5x0_pins[] = {
 };
 
 /* USB */
-#if defined(CONFIG_USB_ULPI)
 
 #define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
 #define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
@@ -176,8 +175,10 @@ static int usbotg_init(struct platform_device *pdev)
 	gpio_set_value(OTG_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 otg_free_reset:
 	gpio_free(OTG_RESET);
@@ -233,8 +234,10 @@ static int usbh2_init(struct platform_device *pdev)
 	gpio_set_value(USBH2_RESET, 0/*LOW*/);
 	mdelay(5);
 	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+	mdelay(10);
 
-	return 0;
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
 
 h2_free_reset:
 	gpio_free(USBH2_RESET);
@@ -246,15 +249,12 @@ h2_free_cs:
 static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif /* CONFIG_USB_ULPI */
 
 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@@ -547,15 +547,15 @@ static void __init armadillo5x0_init(void)
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-#if defined(CONFIG_USB_ULPI)
-	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx31_add_mxc_ehci_otg(&usbotg_pdata);
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+
+	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbotg_pdata.otg)
+		imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
 static void __init armadillo5x0_timer_init(void)
@@ -569,9 +569,10 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.timer		= &armadillo5x0_timer,
-	.init_machine	= armadillo5x0_init,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &armadillo5x0_timer,
+	.init_machine = armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c
new file mode 100644
index 00000000000..d137d7078ee
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-bug.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/iomux-mx3.h>
+#include <mach/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx31.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const unsigned int bug_pins[] __initconst = {
+	MX31_PIN_PC_RST__CTS5,
+	MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5,
+	MX31_PIN_PC_BVD1__RXD5,
+};
+
+static void __init bug_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(bug_pins,
+				      ARRAY_SIZE(bug_pins), "uart-4");
+	imx31_add_imx_uart4(&uart_pdata);
+}
+
+static void __init bug_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer bug_timer = {
+	.init = bug_timer_init,
+};
+
+MACHINE_START(BUG, "BugLabs BUGBase")
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &bug_timer,
+	.init_machine = bug_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 26ae90f0258..ec63d998f64 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -60,7 +60,7 @@ static struct tsc2007_platform_data tsc2007_info = {
 	.x_plate_ohms		= 180,
 };
 
-#define TSC2007_IRQGPIO		(2 * 32 + 2)
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
@@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data
 	.flash_bbt	= 1,
 };
 
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx35_otg_init,
 	.portsc	= MXC_EHCI_MODE_UTMI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= eukrea_cpuimx35_usbh1_init,
 	.portsc	= MXC_EHCI_MODE_SERIAL,
-	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-		  MXC_EHCI_IPPUE_DOWN,
 };
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
@@ -146,7 +156,7 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init eukrea_cpuimx35_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
@@ -184,9 +194,10 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &eukrea_cpuimx35_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &eukrea_cpuimx35_timer,
+	.init_machine = eukrea_cpuimx35_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index df1a6ce8e3e..d35621d62b4 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -266,17 +266,14 @@ static void __init kzm_timer_init(void)
 }
 
 static struct sys_timer kzm_timer = {
-	.init   = kzm_timer_init,
+	.init = kzm_timer_init,
 };
 
-/*
- * The following uses standard kernel macros define in arch.h in order to
- * initialize __mach_desc_KZM_ARM11_01 data structure.
- */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = kzm_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = kzm_board_init,
-	.timer          = &kzm_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = kzm_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &kzm_timer,
+	.init_machine = kzm_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0d65db885be..544d3e414f5 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -21,9 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
+#include <linux/memblock.h>
+
+#include <media/soc_camera.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -35,6 +39,10 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -42,10 +50,6 @@
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-/*
- * This file contains the board-specific initialization routines.
- */
-
 static int mx31_3ds_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
@@ -53,6 +57,12 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/*SPI0*/
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
 	/* SPI 1 */
 	MX31_PIN_CSPI2_SCLK__SCLK,
 	MX31_PIN_CSPI2_MOSI__MOSI,
@@ -100,6 +110,252 @@ static int mx31_3ds_pins[] = {
 	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
 	/* USB Host2 reset */
 	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
+	/* I2C1 */
+	MX31_PIN_I2C_CLK__I2C1_SCL,
+	MX31_PIN_I2C_DAT__I2C1_SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
+	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_CONTRAST__CONTRAST,
+	/* CSI */
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
+	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
+};
+
+/*
+ * Camera support
+ */
+static phys_addr_t mx3_camera_base __initdata;
+#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
+
+#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
+
+static struct gpio mx31_3ds_camera_gpios[] = {
+	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
+	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
+};
+
+static int __init mx31_3ds_camera_alloc_dma(void)
+{
+	int dma;
+
+	if (!mx3_camera_base)
+		return -ENOMEM;
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					mx3_camera_base, mx3_camera_base,
+					MX31_3DS_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	if (!(dma & DMA_MEMORY_MAP))
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int mx31_3ds_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
+	msleep(20);
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info mx31_3ds_i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
+	{ .supply = "cmos_vcore" },
+	{ .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id		= 0,
+	.board_info	= &mx31_3ds_i2c_camera,
+	.i2c_adapter_id	= 0,
+	.power		= mx31_3ds_camera_power,
+	.regulators	= mx31_3ds_camera_regs,
+	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
+};
+
+static struct platform_device mx31_3ds_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+
+struct mx3_camera_pdata mx31_3ds_camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2600,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 480x640 @ 60 Hz */
+		.name		= "Epson-VGA",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 640,
+		.pixclock	= 41701,
+		.left_margin	= 20,
+		.right_margin	= 41,
+		.upper_margin	= 10,
+		.lower_margin	= 5,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Epson-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
+	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
+	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+	.core_supply		= "lcd_2v8",
+	.io_supply		= "vdd_lcdio",
+};
+
+/*
+ * Support for SD card slot in personality board
+ */
+#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static struct gpio mx31_3ds_sdhc1_gpios[] = {
+	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
+	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
+};
+
+static int mx31_3ds_sdhc1_ini