[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

25 files changed, 1241 insertions, 0 deletions

diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 00000000000..3782c355949
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+	.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =KS8695_UART_PA		@ physical base address
+		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.endm
+
+	.macro	senduart, rd, rx
+		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
+		beq	1001b
+	.endm
+
+	.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
+		beq	1001b
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 00000000000..2744fecb429
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
+ /* PCI */
+#define KS8695_MODE_PCI		0
+#define KS8695_MODE_MINIPCI	1
+#define KS8695_MODE_CARDBUS	2
+
+struct ks8695_pci_cfg {
+	short mode;
+	int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 00000000000..56120628008
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 00000000000..b4fe0c11c6c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
+
+		teq	\irqstat, #0
+		beq	1001f
+
+		mov	\irqnr, #0
+
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 00000000000..73c84168761
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 00000000000..1d640d075b7
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA		0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA		0x03F00000
+#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_SIZE		SZ_1M
+
+#define KS8695_PCIMEM_PA	0x60000000
+#define KS8695_PCIMEM_SIZE	SZ_512M
+
+#define KS8695_PCIIO_PA		0x80000000
+#define KS8695_PCIIO_SIZE	SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 00000000000..f364f24ffe1
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 00000000000..86fc9e6ce40
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS				32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX		0
+#define KS8695_IRQ_COMM_TX		1
+#define KS8695_IRQ_EXTERN0		2
+#define KS8695_IRQ_EXTERN1		3
+#define KS8695_IRQ_EXTERN2		4
+#define KS8695_IRQ_EXTERN3		5
+#define KS8695_IRQ_TIMER0		6
+#define KS8695_IRQ_TIMER1		7
+#define KS8695_IRQ_UART_TX		8
+#define KS8695_IRQ_UART_RX		9
+#define KS8695_IRQ_UART_LINE_STATUS	10
+#define KS8695_IRQ_UART_MODEM_STATUS	11
+#define KS8695_IRQ_LAN_RX_STOP		12
+#define KS8695_IRQ_LAN_TX_STOP		13
+#define KS8695_IRQ_LAN_RX_BUF		14
+#define KS8695_IRQ_LAN_TX_BUF		15
+#define KS8695_IRQ_LAN_RX_STATUS	16
+#define KS8695_IRQ_LAN_TX_STATUS	17
+#define KS8695_IRQ_HPNA_RX_STOP		18
+#define KS8695_IRQ_HPNA_TX_STOP		19
+#define KS8695_IRQ_HPNA_RX_BUF		20
+#define KS8695_IRQ_HPNA_TX_BUF		21
+#define KS8695_IRQ_HPNA_RX_STATUS	22
+#define KS8695_IRQ_HPNA_TX_STATUS	23
+#define KS8695_IRQ_BUS_ERROR		24
+#define KS8695_IRQ_WAN_RX_STOP		25
+#define KS8695_IRQ_WAN_TX_STOP		26
+#define KS8695_IRQ_WAN_RX_BUF		27
+#define KS8695_IRQ_WAN_TX_BUF		28
+#define KS8695_IRQ_WAN_RX_STATUS	29
+#define KS8695_IRQ_WAN_TX_STATUS	30
+#define KS8695_IRQ_WAN_LINK		31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 00000000000..dadbe66cb75
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET		KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
+					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..0df6fe61d1c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
+#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
+#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
+#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x)	((x) << 12)
+#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x)	((x) << 8)
+#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x)	((x) << 4)
+#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x)	((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
+#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
+#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
+#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
+#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 00000000000..815ce5c2e3b
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
+#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 00000000000..352b7e8704d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
+#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC		(0x00)		/* Mode Control Register */
+#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
+#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
+#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
+#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
+#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
+#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 00000000000..9ef409901e7
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
+#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
+#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
+#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
+#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
+#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
+#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
+#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
+#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 00000000000..55806bc68ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
+#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
+#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
+#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
+#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
+#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
+#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
+#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
+#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
+#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
+#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
+#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
+#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
+#define		PMC_NORMAL		(0 << 0)
+#define		PMC_4WORD		(1 << 0)
+#define		PMC_8WORD		(2 << 0)
+#define		PMC_16WORD		(3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
+#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
+#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
+#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
+#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
+#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
+#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
+#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
+#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 00000000000..2740c52494a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
+#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID		(0x00)		/* Device ID */
+#define KS8695_RID		(0x04)		/* Revision ID */
+#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
+#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
+#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID			(0xffff << 0)	/* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
+#define RID_REVISION		(0xf << 0)	/* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS			(1 << 1)	/* Speed */
+#define HMC_HDS			(1 << 0)	/* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
+#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
+#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
+#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
+#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
+#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
+#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
+#define WMC_WLS			(1 << 23)	/* Link status */
+#define WMC_WDS			(1 << 22)	/* Duplex status */
+#define WMC_WSS			(1 << 21)	/* Speed status */
+#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
+#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
+#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
+#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
+#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
+#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
+#define WMC_WANF100		(1 << 14)	/* Force 100 */
+#define WMC_WANFF		(1 << 13)	/* Force FDX */
+#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
+#define		WLED1S_SPEED		(0 << 4)
+#define		WLED1S_LINK		(1 << 4)
+#define		WLED1S_DUPLEX		(2 << 4)
+#define		WLED1S_COLLISION	(3 << 4)
+#define		WLED1S_ACTIVITY		(4 << 4)
+#define		WLED1S_FDX_COLLISION	(5 << 4)
+#define		WLED1S_LINK_ACTIVITY	(6 << 4)
+#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
+#define		WLED0S_SPEED		(0 << 0)
+#define		WLED0S_LINK		(1 << 0)
+#define		WLED0S_DUPLEX		(2 << 0)
+#define		WLED0S_COLLISION	(3 << 0)
+#define		WLED0S_ACTIVITY		(4 << 0)
+#define		WLED0S_FDX_COLLISION	(5 << 0)
+#define		WLED0S_LINK_ACTIVITY	(6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
+#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
+#define WPPM_WPI		(1 << 12)	/* PHY isolate */
+#define WPPM_WFL		(1 << 10)	/* Force link */
+#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
+#define WPPM_FEF		(1 << 8)	/* Far End Fault */
+#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
+#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
+#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
+#define WPPM_PD			(1 << 4)	/* Power Down */
+#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
+#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
+#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 00000000000..75a9db6edbd
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
+#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
+#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
+#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
+#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
+#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
+#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
+#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
+#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
+#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
+#define KS8695_PBM		(0x200)		/* Bridge Mode */
+#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
+#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
+#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
+#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
+#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST		(1 << 23)
+
+#define PBCA_TYPE1		(1)
+#define PBCA_ENABLE		(1 << 31)
+
+
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 00000000000..56d12e8de89
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
+#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
+#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+
+#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
+#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
+#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
+#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
+#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
+#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
+#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
+#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
+#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
+#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
+#define		LLED1S_SPEED		(0 << 25)
+#define		LLED1S_LINK		(1 << 25)
+#define		LLED1S_DUPLEX		(2 << 25)
+#define		LLED1S_COLLISION	(3 << 25)
+#define		LLED1S_ACTIVITY		(4 << 25)
+#define		LLED1S_FDX_COLLISION	(5 << 25)
+#define		LLED1S_LINK_ACTIVITY	(6 << 25)
+#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
+#define		LLED0S_SPEED		(0 << 22)
+#define		LLED0S_LINK		(1 << 22)
+#define		LLED0S_DUPLEX		(2 << 22)
+#define		LLED0S_COLLISION	(3 << 22)
+#define		LLED0S_ACTIVITY		(4 << 22)
+#define		LLED0S_FDX_COLLISION	(5 << 22)
+#define		LLED0S_LINK_ACTIVITY	(6 << 22)
+#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
+
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 00000000000..57c20be0c12
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
+#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
+#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
+#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 00000000000..e620cda99d2
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 00000000000..8581fbc6245
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
+#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
+#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
+#define KS8695_URFC	(0x08)		/* FIFO Control Register */
+#define KS8695_URLC	(0x0C)		/* Line Control Register */
+#define KS8695_URMC	(0x10)		/* Modem Control Register */
+#define KS8695_URLS	(0x14)		/* Line Status Register */
+#define KS8695_URMS	(0x18)		/* Modem Status Register */
+#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
+#define KS8695_USR	(0x20)		/* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
+#define		URFC_URFRT_1	(0 << 6)
+#define		URFC_URFRT_4	(1 << 6)
+#define		URFC_URFRT_8	(2 << 6)
+#define		URFC_URFRT_14	(3 << 6)
+#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
+#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
+#define URFC_URFE	(1 << 0)	/* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
+#define URLC_PARITY	(7 << 3)	/* Parity */
+#define		URPE_NONE	(0 << 3)
+#define		URPE_ODD	(1 << 3)
+#define		URPE_EVEN	(3 << 3)
+#define		URPE_MARK	(5 << 3)
+#define		URPE_SPACE	(7 << 3)
+#define URLC_URSB	(1 << 2)	/* Stop Bits */
+#define URLC_URCL	(3 << 0)	/* Character Length */
+#define		URCL_5		(0 << 0)
+#define		URCL_6		(1 << 0)
+#define		URCL_7		(2 << 0)
+#define		URCL_8		(3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB	(1 << 4)	/* Loop-back mode */
+#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
+#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
+#define URMC_URRTS	(1 << 1)	/* Request to Send */
+#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
+#define URLS_URTE	(1 << 6)	/* Transmit Empty */
+#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
+#define URLS_URBI	(1 << 4)	/* Break Interrupt */
+#define URLS_URFE	(1 << 3)	/* Framing Error */
+#define URLS_URPE	(1 << 2)	/* Parity Error */
+#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
+#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
+#define URMS_URRI	(1 << 6)	/* Ring Indicator */
+#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
+#define URMS_URCTS	(1 << 4)	/* Clear to Send */
+#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
+#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI		(1 << 0)	/* Timeout Indication */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 00000000000..eb494ec6e95
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
+#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
+#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
+#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
+#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
+#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
+#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
+#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
+#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 00000000000..2a6f9186905
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks,
+	 */
+	cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		cpu_reset(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 00000000000..4682e350369
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 00000000000..0eee37a6907
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+		barrier();
+
+	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 00000000000..744ac66be3a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
+
+#endif