Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...

20 files changed, 811 insertions, 291 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index cc25501b57f..34106335c72 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,12 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_DOCKSTAR
+	bool "Seagate FreeAgent DockStar"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent DockStar.
+
 config MACH_OPENRD
         bool
 
@@ -100,6 +106,12 @@ config MACH_NETSPACE_MAX_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space Max v2 NAS.
 
+config MACH_D2NET_V2
+	bool "LaCie d2 Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 295d7baa6ae..5dcaa81a2ec 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -7,14 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
-obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
new file mode 100644
index 00000000000..4aa86e4a152
--- /dev/null
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -0,0 +1,229 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON          34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
+
+#define D2NET_V2_SWITCH_POWER_ON           0x1
+#define D2NET_V2_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_ON,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 0,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_OFF,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 0,
+	},
+	[2] = {
+		.code           = KEY_POWER,
+		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
+		.desc           = "Front Push Button",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+	.buttons	= d2net_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED		12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+	{
+		.name	= "d2net_v2:red:fail",
+		.gpio	= D2NET_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
+	.leds		= d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
+#define D2NET_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+	{
+		.name	= "d2net_v2:blue:sata",
+		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
+		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
+	.leds		= d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
+	MPP35_GPIO,		/* Inhibit power-off */
+	0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF		7
+
+static void d2net_v2_power_off(void)
+{
+	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+	lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&d2net_v2_ge00_data);
+	kirkwood_sata_init(&d2net_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&d2net_v2_leds);
+	platform_device_register(&d2net_v2_gpio_leds);
+	platform_device_register(&d2net_v2_gpio_buttons);
+
+	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = d2net_v2_power_off;
+	else
+		pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &lacie_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 16f6691e7c6..9ea71182d31 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,8 +97,6 @@ subsys_initcall(db88f6281_pci_init);
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 00000000000..433ea368c06
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+	{
+		.name			= "dockstar:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dockstar:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+	.leds		= dockstar_led_pins,
+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dockstar_led_data,
+	}
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+static void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+
+	platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+	.boot_params	= 0x00000100,
+	.init_machine	= dockstar_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 54d07c89d4f..8f47dc0a2fe 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,8 +121,6 @@ static void __init guruplug_init(void)
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index d0606774dea..db06ae437d0 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
+	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
new file mode 100644
index 00000000000..24b536ebdf1
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+	unsigned	*addr;
+	int		num_addr;
+	unsigned	*data;
+	int		num_data;
+	unsigned	enable;
+};
+
+enum netxbig_led_mode {
+	NETXBIG_LED_OFF,
+	NETXBIG_LED_ON,
+	NETXBIG_LED_SATA,
+	NETXBIG_LED_TIMER1,
+	NETXBIG_LED_TIMER2,
+	NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+	unsigned long		delay_on;
+	unsigned long		delay_off;
+	enum netxbig_led_mode	mode;
+};
+
+struct netxbig_led {
+	const char	*name;
+	const char	*default_trigger;
+	int		mode_addr;
+	int		*mode_val;
+	int		bright_addr;
+};
+
+struct netxbig_led_platform_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct netxbig_led_timer *timer;
+	int			num_timer;
+	struct netxbig_led	*leds;
+	int			num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 00000000000..d3ea1b6c8a0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= lacie_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &lacie_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init lacie_v2_register_flash(void)
+{
+	spi_register_board_info(lacie_v2_spi_slave_info,
+				ARRAY_SIZE(lacie_v2_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, lacie_v2_i2c_info,
+				ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+	int i;
+	int err;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_num; i++) {
+		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					lacie_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(lacie_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("Failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+	.init = lacie_v2_timer_init,
+};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 00000000000..af521315b87
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index c6b92b42eb4..1e5266f57e2 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,8 +163,6 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index d26bf324738..5e286441b8f 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,56 +24,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/leds-ns2.h>
-#include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netspace_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netspace_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -84,27 +47,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -112,35 +54,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-#define NETSPACE_V2_GPIO_SATA0_POWER	16
-#define NETSPACE_V2_GPIO_SATA1_POWER	17
-
-static void __init netspace_v2_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to setup SATA0 power\n");
-
-	if (machine_is_netspace_max_v2()) {
-		err = gpio_request(NETSPACE_V2_GPIO_SATA1_POWER, "SATA1 power");
-		if (err == 0) {
-			err = gpio_direction_output(
-					NETSPACE_V2_GPIO_SATA1_POWER, 1);
-			if (err)
-				gpio_free(NETSPACE_V2_GPIO_SATA1_POWER);
-		}
-		if (err)
-			pr_err("netspace_v2: failed to setup SATA1 power\n");
-	}
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -224,20 +137,6 @@ static struct platform_device netspace_v2_leds = {
 };
 
 /*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netspace_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netspace_v2_timer = {
-	.init = netspace_v2_timer_init,
-};
-
-/*****************************************************************************
  * General Setup
  ****************************************************************************/
 
@@ -291,18 +190,17 @@ static void __init netspace_v2_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(netspace_v2_mpp_config);
 
-	netspace_v2_sata_power_init();
+	if (machine_is_netspace_max_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(1);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netspace_v2_ge00_data);
 	kirkwood_sata_init(&netspace_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netspace_v2_spi_slave_info,
-				ARRAY_SIZE(netspace_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netspace_v2_i2c_info,
-				ARRAY_SIZE(netspace_v2_i2c_info));
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
 
 	platform_device_register(&netspace_v2_leds);
 	platform_device_register(&netspace_v2_gpio_leds);
@@ -317,36 +215,30 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer