diff options
| author | Paul Mundt <lethal@linux-sh.org> | 2011-01-07 10:29:26 +0900 |
|---|---|---|
| committer | Paul Mundt <lethal@linux-sh.org> | 2011-01-07 10:29:26 +0900 |
| commit | 5e93c6b4ecd78b1bab49bad1dc2f6ed7ec0115ee (patch) | |
| tree | 4f4e321a1ca0baf64d8af528080c71f93495a7d7 /arch/arm/mach-kirkwood/ts219-setup.c | |
| parent | 98d27b8abf413a310df6676f7d2128ada1cccc08 (diff) | |
| parent | 3c0cb7c31c206aaedb967e44b98442bbeb17a6c4 (diff) | |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest
Conflicts:
arch/arm/mach-shmobile/Kconfig
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/arm/mach-kirkwood/ts219-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/ts219-setup.c | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 6710bd7773b..dc999c4c580 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -80,15 +80,19 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button */ - MPP16_GPIO, /* Reset button */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ 0 }; static void __init qnap_ts219_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ @@ -100,6 +104,14 @@ static void __init qnap_ts219_init(void) qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) { + qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ + qnap_ts219_buttons[1].gpio = 37; /* Reset button */ + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + } + kirkwood_ge00_init(&qnap_ts219_ge00_data); kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); |