ARM: imx: move mx3 support to mach-imx

Fixing a few "please, no space before tabs" and "empty line at end of
file" warnings on the way.

LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 276 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 11235ef1043..59c97a33113 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
 	bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
 
 config SOC_IMX1
 	bool
@@ -31,6 +41,24 @@ config SOC_IMX27
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
+config SOC_IMX31
+	bool
+	select CPU_V6
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
+	select CPU_V6
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
+
+
 if ARCH_MX1
 
 comment "MX1 platforms:"
@@ -324,3 +352,251 @@ config MACH_IMX27IPCAM
 	  configurations for the board and its peripherals.
 
 endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select SOC_IMX31
+	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select SOC_IMX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select SOC_IMX35
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif