Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 228 insertions, 0 deletions

diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
new file mode 100644
index 00000000000..21b8fb6122c
--- /dev/null
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -0,0 +1,228 @@
+/*
+ * linux/arch/arm/mach-h720x/cpu-h7202.c
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * processor specific stuff for the Hynix h7202
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/irqs.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include "common.h"
+
+static struct resource h7202ps2_resources[] = {
+	[0] = {
+		.start	= 0x8002c000,
+		.end	= 0x8002c040,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PS2,
+		.end	= IRQ_PS2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device h7202ps2_device = {
+	.name		= "h7202ps2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(h7202ps2_resources),
+	.resource	= h7202ps2_resources,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= (void*)SERIAL0_VIRT,
+		.mapbase	= SERIAL0_BASE,
+		.irq		= IRQ_UART0,
+		.uartclk	= 2*1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{
+		.membase	= (void*)SERIAL1_VIRT,
+		.mapbase	= SERIAL1_BASE,
+		.irq		= IRQ_UART1,
+		.uartclk	= 2*1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+#ifdef CONFIG_H7202_SERIAL23
+	{
+		.membase	= (void*)SERIAL2_VIRT,
+		.mapbase	= SERIAL2_BASE,
+		.irq		= IRQ_UART2,
+		.uartclk	= 2*1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{
+		.membase	= (void*)SERIAL3_VIRT,
+		.mapbase	= SERIAL3_BASE,
+		.irq		= IRQ_UART3,
+		.uartclk	= 2*1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&h7202ps2_device,
+	&serial_device,
+};
+
+/* Although we have two interrupt lines for the timers, we only have one
+ * status register which clears all pending timer interrupts on reading. So
+ * we have to handle all timer interrupts in one place.
+ */
+static void
+h7202_timerx_demux_handler(unsigned int irq_unused, struct irqdesc *desc,
+			struct pt_regs *regs)
+{
+	unsigned int mask, irq;
+
+	mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
+
+	if ( mask & TSTAT_T0INT ) {
+		write_seqlock(&xtime_lock);
+		timer_tick(regs);
+		write_sequnlock(&xtime_lock);
+		if( mask == TSTAT_T0INT )
+			return;
+	}
+
+	mask >>= 1;
+	irq = IRQ_TIMER1;
+	desc = irq_desc + irq;
+	while (mask) {
+		if (mask & 1)
+			desc->handle(irq, desc, regs);
+		irq++;
+		desc++;
+		mask >>= 1;
+	}
+}
+
+/*
+ * Timer interrupt handler
+ */
+static irqreturn_t
+h7202_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	h7202_timerx_demux_handler(0, NULL, regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * mask multiplexed timer irq's
+ */
+static void inline mask_timerx_irq (u32 irq)
+{
+	unsigned int bit;
+	bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
+	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
+}
+
+/*
+ * unmask multiplexed timer irq's
+ */
+static void inline unmask_timerx_irq (u32 irq)
+{
+	unsigned int bit;
+	bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
+	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
+}
+
+static struct irqchip h7202_timerx_chip = {
+	.ack = mask_timerx_irq,
+	.mask = mask_timerx_irq,
+	.unmask = unmask_timerx_irq,
+};
+
+static struct irqaction h7202_timer_irq = {
+	.name		= "h7202 Timer Tick",
+	.flags		= SA_INTERRUPT,
+	.handler	= h7202_timer_interrupt
+};
+
+/*
+ * Setup TIMER0 as system timer
+ */
+void __init h7202_init_time(void)
+{
+	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
+	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
+	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
+	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
+
+	setup_irq(IRQ_TIMER0, &h7202_timer_irq);
+}
+
+struct sys_timer h7202_timer = {
+	.init		= h7202_init_time,
+	.offset		= h720x_gettimeoffset,
+};
+
+void __init h7202_init_irq (void)
+{
+	int 	irq;
+
+	CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
+
+	for (irq = IRQ_TIMER1;
+	                  irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
+		mask_timerx_irq(irq);
+		set_irq_chip(irq, &h7202_timerx_chip);
+		set_irq_handler(irq, do_edge_IRQ);
+		set_irq_flags(irq, IRQF_VALID );
+	}
+	set_irq_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
+
+	h720x_init_irq();
+}
+
+void __init init_hw_h7202(void)
+{
+	/* Enable clocks */
+	CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
+
+	CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
+	CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
+#ifdef CONFIG_H7202_SERIAL23
+	CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
+	CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
+	CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
+	                        AMULSEL_USIN3 | AMULSEL_USOUT3;
+#endif
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}