Merge branch 'samsung_platform_data' into staging/for_v3.7

* samsung_platform_data:
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

9 files changed, 6 insertions, 387 deletions

diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h
deleted file mode 100644
index 05b29344309..00000000000
--- a/arch/arm/mach-davinci/include/mach/aemif.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
-
-#define ACR_ASIZE_MASK		0x3
-#define ACR_EW_MASK		BIT(30)
-#define ACR_SS_MASK		BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
-	u8	wsetup;
-	u8	wstrobe;
-	u8	whold;
-
-	u8	rsetup;
-	u8	rstrobe;
-	u8	rhold;
-
-	u8	ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs);
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 8eecbce7feb..13d22957575 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -20,12 +20,12 @@
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/i2c.h>
 #include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <media/davinci/vpif_types.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
deleted file mode 100644
index 2312d197dfb..00000000000
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
-	unsigned int	bus_delay;	/* post-transaction delay (usec) */
-	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
-	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
deleted file mode 100644
index 7a560e05bda..00000000000
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
-	DAVINCI_KEYSCAN_MATRIX_4X4,
-	DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
-	int		(*device_enable)(struct device *dev);
-	unsigned short	*keymap;
-	u32		keymapsize;
-	u8		rep:1;
-	u8		strobe;
-	u8		interval;
-	u8		matrix_type;
-};
-
-#endif
-
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
deleted file mode 100644
index 5ba6b22ce33..00000000000
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
-	/* get_cd()/get_wp() may sleep */
-	int	(*get_cd)(int module);
-	int	(*get_ro)(int module);
-
-	void	(*set_power)(int module, bool on);
-
-	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
-	u8	wires;
-
-	u32     max_freq;
-
-	/* any additional host capabilities: OR'd in to mmc->f_caps */
-	u32     caps;
-
-	/* Version of the MMC/SD controller */
-	u8	version;
-
-	/* Number of sg segments */
-	u8	nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
-	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
-	MMC_CTLR_VERSION_2,	/* DA830 */
-};
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
deleted file mode 100644
index 1cf555aef89..00000000000
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
- *   Troy Kisky <troy.kisky@boundarydevices.com>
- *   Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET		0x60
-#define NANDFSR_OFFSET		0x64
-#define NANDF1ECC_OFFSET	0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET	0xbc
-#define NAND_4BIT_ECC1_OFFSET		0xc0
-#define NAND_4BIT_ECC2_OFFSET		0xc4
-#define NAND_4BIT_ECC3_OFFSET		0xc8
-#define NAND_4BIT_ECC4_OFFSET		0xcc
-#define NAND_ERR_ADD1_OFFSET		0xd0
-#define NAND_ERR_ADD2_OFFSET		0xd4
-#define NAND_ERR_ERRVAL1_OFFSET		0xd8
-#define NAND_ERR_ERRVAL2_OFFSET		0xdc
-
-/* NOTE:  boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define	MASK_ALE		0x08
-#define	MASK_CLE		0x10
-
-struct davinci_nand_pdata {		/* platform_data */
-	uint32_t		mask_ale;
-	uint32_t		mask_cle;
-
-	/* for packages using two chipselects */
-	uint32_t		mask_chipsel;
-
-	/* board's default static partition info */
-	struct mtd_partition	*parts;
-	unsigned		nr_parts;
-
-	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_SOFT
-	 * else  == NAND_ECC_HW, according to ecc_bits
-	 *
-	 * All DaVinci-family chips support 1-bit hardware ECC.
-	 * Newer ones also support 4-bit ECC, but are awkward
-	 * using it with large page chips.
-	 */
-	nand_ecc_modes_t	ecc_mode;
-	u8			ecc_bits;
-
-	/* e.g. NAND_BUSWIDTH_16 */
-	unsigned		options;
-	/* e.g. NAND_BBT_USE_FLASH */
-	unsigned		bbt_options;
-
-	/* Main and mirror bbt descriptor overrides */
-	struct nand_bbt_descr	*bbt_td;
-	struct nand_bbt_descr	*bbt_md;
-
-	/* Access timings */
-	struct davinci_aemif_timing	*timing;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
deleted file mode 100644
index 7af305b3786..00000000000
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS	0xFF
-
-enum {
-	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
-	SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version:	version of the SPI IP. Different DaVinci devices have slightly
- *		varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
- *		controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
- *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- *		to populate if all chip-selects are internal.
- * @cshold_bug:	set this to true if the SPI controller on your chip requires
- *		a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- *		device on the bus.
- */
-struct davinci_spi_platform_data {
-	u8			version;
-	u8			num_chipselect;
-	u8			intr_line;
-	u8			*chip_sel;
-	bool			cshold_bug;
-	enum dma_event_q	dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay:	amount of delay between transmissions. Measured in number of
- *		SPI module clocks.
- * @odd_parity:	polarity of parity flag at the end of transmit data stream.
- *		0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- *		data stream.
- * @io_type:	type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay:	chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay:	chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay:	transmit data finished to SPI ENAn pin inactive time. Measured
- *		in number of SPI clocks.
- * @c2edelay:	chip-select active to SPI ENAn signal active time. Measured in
- *		number of SPI clocks.
- */
-struct davinci_spi_config {
-	u8	wdelay;
-	u8	odd_parity;
-	u8	parity_enable;
-#define SPI_IO_TYPE_INTR	0
-#define SPI_IO_TYPE_POLL	1
-#define SPI_IO_TYPE_DMA		2
-	u8	io_type;
-	u8	timer_disable;
-	u8	c2tdelay;
-	u8	t2cdelay;
-	u8	t2edelay;
-	u8	c2edelay;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 83e5926f3c4..1656a02e3ed 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -36,8 +36,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/ti_ssp.h>
 
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
deleted file mode 100644
index e0bc4abe69c..00000000000
--- a/arch/arm/mach-davinci/include/mach/usb.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
-struct	da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
-				     unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct	da8xx_ohci_root_hub {
-	/* Switch the port power on/off */
-	int	(*set_power)(unsigned port, int on);
-	/* Read the port power status */
-	int	(*get_power)(unsigned port);
-	/* Read the port over-current indicator */
-	int	(*get_oci)(unsigned port);
-	/* Over-current indicator change notification (pass NULL to disable) */
-	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
-
-	/* Time from power on to power good (in 2 ms units) */
-	u8	potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif	/* ifndef __ASM_ARCH_USB_H */