[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
new file mode 100644
index 00000000000..17e68f5efb1
--- /dev/null
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91/board-kb9202.c
+ *
+ *  Copyright (c) 2005 kb_admin
+ *  		       KwikByte, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata kb9202_uart_config = {
+	.console_tty	= 0,					/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
+};
+
+static void __init kb9202_map_io(void)
+{
+	/* Initialize processor: 10 MHz crystal */
+	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&kb9202_uart_config);
+}
+
+static void __init kb9202_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kb9202_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PB29,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata kb9202_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata kb9202_udc_data = {
+	.vbus_pin	= AT91_PIN_PB24,
+	.pullup_pin	= AT91_PIN_PB22,
+};
+
+static struct at91_mmc_data __initdata kb9202_mmc_data = {
+	.det_pin	= AT91_PIN_PB2,
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+	{
+		.name	= "nand_fs",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+	return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+	// .det_pin	= ... not there
+	.rdy_pin	= AT91_PIN_PC29,
+	.enable_pin	= AT91_PIN_PC28,
+	.partition_info	= nand_partitions,
+};
+
+static void __init kb9202_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&kb9202_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&kb9202_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&kb9202_udc_data);
+	/* MMC */
+	at91_add_device_mmc(&kb9202_mmc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+	/* NAND */
+	at91_add_device_nand(&kb9202_nand_data);
+}
+
+MACHINE_START(KB9200, "KB920x")
+	/* Maintainer: KwikByte, Inc. */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= kb9202_map_io,
+	.init_irq	= kb9202_init_irq,
+	.init_machine	= kb9202_board_init,
+MACHINE_END