Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits)
  [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver
  [ARM] pxa: V4L2 soc_camera driver for PXA270
  [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers
  [ARM] 5005/1: BAST: Fix kset_name initialiser
  [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410
  [ARM] 4988/1: Add GPIO lib support to the EP93xx
  [ARM] Add initial sparsemem support
  [ARM] pxa: initialise PXA devices before platform init code
  [ARM] 5002/1: tosa: add two more leds
  [ARM] 5004/1: Tosa: make several unreferenced structures static.
  [ARM] 5003/1: Shut up sparse warnings
  [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable()
  [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
  [ARM] 4974/1: Drop unused leds-tosa.
  [ARM] 4973/1: Tosa: use leds-gpio driver.
  [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code
  [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks
  [ARM] pxa: lubbock: move mis-placed SPI info
  [ARM] 4970/1: tosa: correct gpio used for wake up.
  [ARM] 4966/1: magician: add MFP pin configuration
  ...

1 files changed, 49 insertions, 49 deletions

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 0b12e1adcc8..b6454c52596 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,8 +22,8 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam926x_mc.h>
 #include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data;
 #define NAND_BASE	AT91_CHIPSELECT_3
 
 static struct resource nand_resources[] = {
-	{
+	[0] = {
 		.start	= NAND_BASE,
 		.end	= NAND_BASE + SZ_256M - 1,
 		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC0,
+		.end	= AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TCB0,
+		.end	= AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TCB,
+		.end	= AT91SAM9263_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all three TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
+	platform_device_register(&at91sam9263_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
@@ -933,9 +975,6 @@ static inline void configure_ssc1_pins(unsigned pins)
 }
 
 /*
- * Return the device node so that board init code can use it as the
- * parent for the device node reflecting how it's used on this board.
- *
  * SSC controllers are accessed through library code, instead of any
  * kind of all-singing/all-dancing driver.  For example one could be
  * used by a particular I2S audio codec's driver, while another one
@@ -1146,49 +1185,9 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9263_dbgu_device;
-				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1227,8 +1226,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1239,9 +1236,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -1257,6 +1256,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }