Merge branch 'ja-nommu-for-rmk-v2' of git://linux-arm.org/linux-ja into devel-stable

This includes the following series sent earlier to the list:
 - nommu-fixes
 - R7 Support
 - MPU support

I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were
discussing today until we've reached a conclusion/that's had some more
review.

This is rebased (and re-tested) on your devel-stable branch because
otherwise there were going to be conflicts with Uwe's V7M work now that
you've merged that. I've included the fix for limiting MPU to CPU_V7.

5 files changed, 211 insertions, 37 deletions

diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f4285b5ffb0..fccfbdb03df 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -38,7 +38,10 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
-obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
+obj-$(CONFIG_SMP)		+= smp.o
+ifdef CONFIG_MMU
+obj-$(CONFIG_SMP)		+= smp_tlb.o
+endif
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_ARM_ARCH_TIMER)	+= arch_timer.o
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 8812ce88f7a..75f14cc3e07 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -17,9 +17,12 @@
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/memory.h>
 #include <asm/cp15.h>
 #include <asm/thread_info.h>
 #include <asm/v7m.h>
+#include <asm/mpu.h>
+#include <asm/page.h>
 
 /*
  * Kernel startup entry point.
@@ -63,12 +66,74 @@ ENTRY(stext)
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p				@ yes, error 'p'
 
-	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+#ifdef CONFIG_ARM_MPU
+	/* Calculate the size of a region covering just the kernel */
+	ldr	r5, =PHYS_OFFSET		@ Region start: PHYS_OFFSET
+	ldr     r6, =(_end)			@ Cover whole kernel
+	sub	r6, r6, r5			@ Minimum size of region to map
+	clz	r6, r6				@ Region size must be 2^N...
+	rsb	r6, r6, #31			@ ...so round up region size
+	lsl	r6, r6, #MPU_RSR_SZ		@ Put size in right field
+	orr	r6, r6, #(1 << MPU_RSR_EN)	@ Set region enabled bit
+	bl	__setup_mpu
+#endif
+	ldr	r13, =__mmap_switched		@ address to jump to after
+						@ initialising sctlr
+	adr	lr, BSYM(1f)			@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
+ 1:	b	__after_proc_init
 ENDPROC(stext)
 
+#ifdef CONFIG_SMP
+	__CPUINIT
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+#ifndef CONFIG_CPU_CP15
+	ldr	r9, =CONFIG_PROCESSOR_ID
+#else
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+#endif
+	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
+	movs	r10, r5				@ invalid processor?
+	beq	__error_p			@ yes, error 'p'
+
+	adr	r4, __secondary_data
+	ldmia	r4, {r7, r12}
+
+#ifdef CONFIG_ARM_MPU
+	/* Use MPU region info supplied by __cpu_up */
+	ldr	r6, [r7]			@ get secondary_data.mpu_szr
+	bl      __setup_mpu			@ Initialize the MPU
+#endif
+
+	adr	lr, BSYM(__after_proc_init)	@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
+ENDPROC(secondary_startup)
+
+ENTRY(__secondary_switched)
+	ldr	sp, [r7, #8]			@ set up the stack pointer
+	mov	fp, #0
+	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* CONFIG_SMP */
+
 /*
  * Set the Control Register and Read the process ID.
  */
@@ -99,10 +164,97 @@ __after_proc_init:
 #endif
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
-
-	b	__mmap_switched			@ clear the BSS and jump
-						@ to start_kernel
+	mov	pc, r13
 ENDPROC(__after_proc_init)
 	.ltorg
 
+#ifdef CONFIG_ARM_MPU
+
+
+/* Set which MPU region should be programmed */
+.macro set_region_nr tmp, rgnr
+	mov	\tmp, \rgnr			@ Use static region numbers
+	mcr	p15, 0, \tmp, c6, c2, 0		@ Write RGNR
+.endm
+
+/* Setup a single MPU region, either D or I side (D-side for unified) */
+.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
+	mcr	p15, 0, \bar, c6, c1, (0 + \side)	@ I/DRBAR
+	mcr	p15, 0, \acr, c6, c1, (4 + \side)	@ I/DRACR
+	mcr	p15, 0, \sr, c6, c1, (2 + \side)		@ I/DRSR
+.endm
+
+/*
+ * Setup the MPU and initial MPU Regions. We create the following regions:
+ * Region 0: Use this for probing the MPU details, so leave disabled.
+ * Region 1: Background region - covers the whole of RAM as strongly ordered
+ * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
+ * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
+ *
+ * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
+*/
+
+ENTRY(__setup_mpu)
+
+	/* Probe for v7 PMSA compliance */
+	mrc	p15, 0, r0, c0, c1, 4		@ Read ID_MMFR0
+	and	r0, r0, #(MMFR0_PMSA)		@ PMSA field
+	teq	r0, #(MMFR0_PMSAv7)		@ PMSA v7
+	bne	__error_p			@ Fail: ARM_MPU on NOT v7 PMSA
+
+	/* Determine whether the D/I-side memory map is unified. We set the
+	 * flags here and continue to use them for the rest of this function */
+	mrc	p15, 0, r0, c0, c0, 4		@ MPUIR
+	ands	r5, r0, #MPUIR_DREGION_SZMASK	@ 0 size d region => No MPU
+	beq	__error_p			@ Fail: ARM_MPU and no MPU
+	tst	r0, #MPUIR_nU			@ MPUIR_nU = 0 for unified
+
+	/* Setup second region first to free up r6 */
+	set_region_nr r0, #MPU_RAM_REGION
+	isb
+	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
+	ldr	r0, =PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
+	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled
+	beq	1f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
+1:	isb
+
+	/* First/background region */
+	set_region_nr r0, #MPU_BG_REGION
+	isb
+	/* Execute Never,  strongly ordered, inaccessible to PL0, rw PL1  */
+	mov	r0, #0				@ BG region starts at 0x0
+	ldr	r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
+	mov	r6, #MPU_RSR_ALL_MEM		@ 4GB region, enabled
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ 0x0, BG region, enabled
+	beq	2f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
+2:	isb
+
+	/* Vectors region */
+	set_region_nr r0, #MPU_VECTORS_REGION
+	isb
+	/* Shared, inaccessible to PL0, rw PL1 */
+	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
+	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
+	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
+	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
+	beq	3f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE	@ VECTORS_BASE, PL0 NA, enabled
+3:	isb
+
+	/* Enable the MPU */
+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
+	bic     r0, r0, #CR_BR			@ Disable the 'default mem-map'
+	orr	r0, r0, #CR_M			@ Set SCTRL.M (MPU on)
+	mcr	p15, 0, r0, c1, c0, 0		@ Enable MPU
+	isb
+	mov pc,lr
+ENDPROC(__setup_mpu)
+#endif
 #include "head-common.S"
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 296786bdbb7..1c16c35c271 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -392,14 +392,19 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		if (ksig->ka.sa.sa_flags & SA_SIGINFO)
 			idx += 3;
 
+		/*
+		 * Put the sigreturn code on the stack no matter which return
+		 * mechanism we use in order to remain ABI compliant
+		 */
 		if (__put_user(sigreturn_codes[idx],   rc) ||
 		    __put_user(sigreturn_codes[idx+1], rc+1))
 			return 1;
 
-		if (cpsr & MODE32_BIT) {
+		if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
 			/*
 			 * 32-bit code can use the new high-page
-			 * signal return code support.
+			 * signal return code support except when the MPU has
+			 * protected the vectors page from PL0
 			 */
 			retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
 		} else {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 550d63cef68..e17d9346bae 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -45,6 +45,7 @@
 #include <asm/smp_plat.h>
 #include <asm/virt.h>
 #include <asm/mach/arch.h>
+#include <asm/mpu.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -87,8 +88,14 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 	 * its stack and the page tables.
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
+#ifdef CONFIG_ARM_MPU
+	secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr;
+#endif
+
+#ifdef CONFIG_MMU
 	secondary_data.pgdir = virt_to_phys(idmap_pgd);
 	secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
+#endif
 	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
 
@@ -112,9 +119,8 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
 		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
 	}
 
-	secondary_data.stack = NULL;
-	secondary_data.pgdir = 0;
 
+	memset(&secondary_data, 0, sizeof(secondary_data));
 	return ret;
 }
 
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index c59c97ea826..38a50676213 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -10,6 +10,42 @@
 extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
 extern void cpu_resume_mmu(void);
 
+#ifdef CONFIG_MMU
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	struct mm_struct *mm = current->active_mm;
+	int ret;
+
+	if (!idmap_pgd)
+		return -EINVAL;
+
+	/*
+	 * Provide a temporary page table with an identity mapping for
+	 * the MMU-enable code, required for resuming.  On successful
+	 * resume (indicated by a zero return code), we need to switch
+	 * back to the correct page tables.
+	 */
+	ret = __cpu_suspend(arg, fn);
+	if (ret == 0) {
+		cpu_switch_mm(mm->pgd, mm);
+		local_flush_bp_all();
+		local_flush_tlb_all();
+	}
+
+	return ret;
+}
+#else
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	return __cpu_suspend(arg, fn);
+}
+#define	idmap_pgd	NULL
+#endif
+
 /*
  * This is called by __cpu_suspend() to save the state, and do whatever
  * flushing is required to ensure that when the CPU goes to sleep we have
@@ -46,31 +82,3 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
 	outer_clean_range(virt_to_phys(save_ptr),
 			  virt_to_phys(save_ptr) + sizeof(*save_ptr));
 }
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
-	struct mm_struct *mm = current->active_mm;
-	int ret;
-
-	if (!idmap_pgd)
-		return -EINVAL;
-
-	/*
-	 * Provide a temporary page table with an identity mapping for
-	 * the MMU-enable code, required for resuming.  On successful
-	 * resume (indicated by a zero return code), we need to switch
-	 * back to the correct page tables.
-	 */
-	ret = __cpu_suspend(arg, fn);
-	if (ret == 0) {
-		cpu_switch_mm(mm->pgd, mm);
-		local_flush_bp_all();
-		local_flush_tlb_all();
-	}
-
-	return ret;
-}