Merge branch 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)
  ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET
  ARM: gic, local timers: use the request_percpu_irq() interface
  ARM: gic: consolidate PPI handling
  ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H
  ARM: mach-s5p64x0: remove mach/memory.h
  ARM: mach-s3c64xx: remove mach/memory.h
  ARM: plat-mxc: remove mach/memory.h
  ARM: mach-prima2: remove mach/memory.h
  ARM: mach-zynq: remove mach/memory.h
  ARM: mach-bcmring: remove mach/memory.h
  ARM: mach-davinci: remove mach/memory.h
  ARM: mach-pxa: remove mach/memory.h
  ARM: mach-ixp4xx: remove mach/memory.h
  ARM: mach-h720x: remove mach/memory.h
  ARM: mach-vt8500: remove mach/memory.h
  ARM: mach-s5pc100: remove mach/memory.h
  ARM: mach-tegra: remove mach/memory.h
  ARM: plat-tcc: remove mach/memory.h
  ARM: mach-mmp: remove mach/memory.h
  ARM: mach-cns3xxx: remove mach/memory.h
  ...

Fix up mostly pretty trivial conflicts in:
 - arch/arm/Kconfig
 - arch/arm/include/asm/localtimer.h
 - arch/arm/kernel/Makefile
 - arch/arm/mach-shmobile/board-ap4evb.c
 - arch/arm/mach-u300/core.c
 - arch/arm/mm/dma-mapping.c
 - arch/arm/mm/proc-v7.S
 - arch/arm/plat-omap/Kconfig
largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP ->
CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and
addition of NEED_MACH_MEMORY_H next to HAVE_IDE.

22 files changed, 5562 insertions, 894 deletions

diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 68036eece34..16eed6aebfa 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o
+obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
@@ -43,6 +43,13 @@ obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
 else
 obj-$(CONFIG_KPROBES)		+= kprobes-arm.o
 endif
+obj-$(CONFIG_ARM_KPROBES_TEST)	+= test-kprobes.o
+test-kprobes-objs		:= kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs		+= kprobes-test-thumb.o
+else
+test-kprobes-objs		+= kprobes-test-arm.o
+endif
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 0f852d082fc..204e2160cfc 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		.endm
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
 
 #ifdef CONFIG_MMU
 		.macro	addruart_current, rx, tmp1, tmp2
-		addruart	\tmp1, \tmp2
+		addruart	\tmp1, \tmp2, \rx
 		mrc		p15, 0, \rx, c1, c0
 		tst		\rx, #1
 		moveq		\rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 239703dbdf4..566c54c2a1f 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -99,7 +99,7 @@ ENTRY(stext)
 	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
 	add	r8, r8, r4			@ PHYS_OFFSET
 #else
-	ldr	r8, =PLAT_PHYS_OFFSET
+	ldr	r8, =PHYS_OFFSET		@ always constant in this case
 #endif
 
 	/*
@@ -238,7 +238,7 @@ __create_page_tables:
 	 * This allows debug messages to be output
 	 * via a serial console before paging_init.
 	 */
-	addruart r7, r3
+	addruart r7, r3, r0
 
 	mov	r3, r3, lsr #SECTION_SHIFT
 	mov	r3, r3, lsl #PMD_ORDER
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1f556..814a52a9dc3 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
 
 /* Number of BRP/WRP registers on this CPU. */
 static int core_num_brps;
-static int core_num_reserved_brps;
 static int core_num_wrps;
 
 /* Debug architecture version. */
@@ -137,10 +136,11 @@ static u8 get_debug_arch(void)
 	u32 didr;
 
 	/* Do we implement the extended CPUID interface? */
-	if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
-	    "CPUID feature registers not supported. "
-	    "Assuming v6 debug is present.\n"))
+	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+		pr_warning("CPUID feature registers not supported. "
+			   "Assuming v6 debug is present.\n");
 		return ARM_DEBUG_ARCH_V6;
+	}
 
 	ARM_DBG_READ(c0, 0, didr);
 	return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@ u8 arch_get_debug_arch(void)
 static int debug_arch_supported(void)
 {
 	u8 arch = get_debug_arch();
-	return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+	/* We don't support the memory-mapped interface. */
+	return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+		arch >= ARM_DEBUG_ARCH_V7_1;
+}
+
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+	u32 didr;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 28) & 0xf) + 1;
 }
 
-/* Determine number of BRP register available. */
+/* Determine number of BRP registers available. */
 static int get_num_brp_resources(void)
 {
 	u32 didr;
@@ -176,9 +187,10 @@ static int core_has_mismatch_brps(void)
 static int get_num_wrps(void)
 {
 	/*
-	 * FIXME: When a watchpoint fires, the only way to work out which
-	 * watchpoint it was is by disassembling the faulting instruction
-	 * and working out the address of the memory access.
+	 * On debug architectures prior to 7.1, when a watchpoint fires, the
+	 * only way to work out which watchpoint it was is by disassembling
+	 * the faulting instruction and working out the address of the memory
+	 * access.
 	 *
 	 * Furthermore, we can only do this if the watchpoint was precise
 	 * since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@ static int get_num_wrps(void)
 	 * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
 	 * that it is set on some implementations].
 	 */
+	if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+		return 1;
 
-#if 0
-	int wrps;
-	u32 didr;
-	ARM_DBG_READ(c0, 0, didr);
-	wrps = ((didr >> 28) & 0xf) + 1;
-#endif
-	int wrps = 1;
-
-	if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
-		wrps = get_num_brp_resources() - 1;
-
-	return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
-	if (core_has_mismatch_brps())
-		return get_num_wrps();
-	return 0;
+	return get_num_wrp_resources();
 }
 
 /* Determine number of usable BRPs available. */
 static int get_num_brps(void)
 {
 	int brps = get_num_brp_resources();
-	if (core_has_mismatch_brps())
-		brps -= get_num_reserved_brps();
-	return brps;
+	return core_has_mismatch_brps() ? brps - 1 : brps;
 }
 
 /*
@@ -239,7 +232,7 @@ static int enable_monitor_mode(void)
 
 	/* Ensure that halting mode is disabled. */
 	if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
-			"halting debug mode enabled. Unable to access hardware resources.\n")) {
+		"halting debug mode enabled. Unable to access hardware resources.\n")) {
 		ret = -EPERM;
 		goto out;
 	}
@@ -255,6 +248,7 @@ static int enable_monitor_mode(void)
 		ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
 		break;
 	case ARM_DEBUG_ARCH_V7_ECP14:
+	case ARM_DEBUG_ARCH_V7_1:
 		ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
 		break;
 	default:
@@ -346,24 +340,10 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		val_base = ARM_BASE_BVR;
 		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
 		max_slots = core_num_brps;
-		if (info->step_ctrl.enabled) {
-			/* Override the breakpoint data with the step data. */
-			addr = info->trigger & ~0x3;
-			ctrl = encode_ctrl_reg(info->step_ctrl);
-		}
 	} else {
 		/* Watchpoint */
-		if (info->step_ctrl.enabled) {
-			/* Install into the reserved breakpoint region. */
-			ctrl_base = ARM_BASE_BCR + core_num_brps;
-			val_base = ARM_BASE_BVR + core_num_brps;
-			/* Override the watchpoint data with the step data. */
-			addr = info->trigger & ~0x3;
-			ctrl = encode_ctrl_reg(info->step_ctrl);
-		} else {
-			ctrl_base = ARM_BASE_WCR;
-			val_base = ARM_BASE_WVR;
-		}
+		ctrl_base = ARM_BASE_WCR;
+		val_base = ARM_BASE_WVR;
 		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
@@ -382,6 +362,17 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		goto out;
 	}
 
+	/* Override the breakpoint data with the step data. */
+	if (info->step_ctrl.enabled) {
+		addr = info->trigger & ~0x3;
+		ctrl = encode_ctrl_reg(info->step_ctrl);
+		if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+			i = 0;
+			ctrl_base = ARM_BASE_BCR + core_num_brps;
+			val_base = ARM_BASE_BVR + core_num_brps;
+		}
+	}
+
 	/* Setup the address register. */
 	write_wb_reg(val_base + i, addr);
 
@@ -405,10 +396,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
-		if (info->step_ctrl.enabled)
-			base = ARM_BASE_BCR + core_num_brps;
-		else
-			base = ARM_BASE_WCR;
+		base = ARM_BASE_WCR;
 		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
@@ -426,6 +414,13 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
 		return;
 
+	/* Ensure that we disable the mismatch breakpoint. */
+	if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+	    info->step_ctrl.enabled) {
+		i = 0;
+		base = ARM_BASE_BCR + core_num_brps;
+	}
+
 	/* Reset the control register. */
 	write_wb_reg(base + i, 0);
 }
@@ -632,10 +627,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	 * we can use the mismatch feature as a poor-man's hardware
 	 * single-step, but this only works for per-task breakpoints.
 	 */
-	if (WARN_ONCE(!bp->overflow_handler &&
-		(arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
-		 || !bp->hw.bp_target),
-			"overflow handler required but none found\n")) {
+	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+		pr_warning("overflow handler required but none found\n");
 		ret = -EINVAL;
 	}
 out:
@@ -666,34 +660,62 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+			       struct pt_regs *regs)
 {
-	int i;
+	int i, access;
+	u32 val, ctrl_reg, alignment_mask;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
+	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 
-	/* Without a disassembler, we can only handle 1 watchpoint. */
-	BUG_ON(core_num_wrps > 1);
-
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
 
 		wp = slots[i];
 
-		if (wp == NULL) {
-			rcu_read_unlock();
-			continue;
-		}
+		if (wp == NULL)
+			goto unlock;
 
+		info = counter_arch_bp(wp);
 		/*
-		 * The DFAR is an unknown value. Since we only allow a
-		 * single watchpoint, we can set the trigger to the lowest
-		 * possible faulting address.
+		 * The DFAR is an unknown value on debug architectures prior
+		 * to 7.1. Since we only allow a single watchpoint on these
+		 * older CPUs, we can set the trigger to the lowest possible
+		 * faulting address.
 		 */
-		info = counter_arch_bp(wp);
-		info->trigger = wp->attr.bp_addr;
+		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+			BUG_ON(i > 0);
+			info->trigger = wp->attr.bp_addr;
+		} else {
+			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+				alignment_mask = 0x7;
+			else
+				alignment_mask = 0x3;
+
+			/* Check if the watchpoint value matches. */
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			if (val != (addr & ~alignment_mask))
+				goto unlock;
+
+			/* Possible match, check the byte address select. */
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			if (!((1 << (addr & alignment_mask)) & ctrl.len))
+				goto unlock;
+
+			/* Check that the access type matches. */
+			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+				 HW_BREAKPOINT_R;
+			if (!(access & hw_breakpoint_type(wp)))
+				goto unlock;
+
+			/* We have a winner. */
+			info->trigger = addr;
+		}
+
 		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
 		perf_bp_event(wp, regs);
 
@@ -705,6 +727,7 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
 		if (!wp->overflow_handler)
 			enable_single_step(wp, instruction_pointer(regs));
 
+unlock:
 		rcu_read_unlock();
 	}
 }
@@ -717,7 +740,7 @@ static void watchpoint_single_step_handler(unsigned long pc)
 
 	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 
-	for (i = 0; i < core_num_reserved_brps; ++i) {
+	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
 
 		wp = slots[i];
@@ -820,7 +843,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	case ARM_ENTRY_ASYNC_WATCHPOINT:
 		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
 	case ARM_ENTRY_SYNC_WATCHPOINT:
-		watchpoint_handler(addr, regs);
+		watchpoint_handler(addr, fsr, regs);
 		break;
 	default:
 		ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 /*
  * One-time initialisation.
  */
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
 {
-	int i, cpu = smp_processor_id();
+	int cpu = smp_processor_id();
+
+	pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+		   instr, cpu);
+
+	/* Set the error flag for this CPU and skip the faulting instruction. */
+	cpumask_set_cpu(cpu, &debug_err_mask);
+	instruction_pointer(regs) += 4;
+	return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+	.instr_mask	= 0x0fe80f10,
+	.instr_val	= 0x0e000e10,
+	.fn		= debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+	int i, raw_num_brps, err = 0, cpu = smp_processor_id();
 	u32 dbg_power;
-	cpumask_t *cpumask = info;
 
 	/*
 	 * v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,57 @@ static void reset_ctrl_regs(void *info)
 	 * Access Register to avoid taking undefined instruction exceptions
 	 * later on.
 	 */
-	if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+	switch (debug_arch) {
+	case ARM_DEBUG_ARCH_V6:
+	case ARM_DEBUG_ARCH_V6_1:
+		/* ARMv6 cores just need to reset the registers. */
+		goto reset_regs;
+	case ARM_DEBUG_ARCH_V7_ECP14:
 		/*
 		 * Ensure sticky power-down is clear (i.e. debug logic is
 		 * powered up).
 		 */
 		asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
-		if ((dbg_power & 0x1) == 0) {
-			pr_warning("CPU %d debug is powered down!\n", cpu);
-			cpumask_or(cpumask, cpumask, cpumask_of(cpu));
-			return;
-		}
-
+		if ((dbg_power & 0x1) == 0)
+			err = -EPERM;
+		break;
+	case ARM_DEBUG_ARCH_V7_1:
 		/*
-		 * Unconditionally clear the lock by writing a value
-		 * other than 0xC5ACCE55 to the access register.
+		 * Ensure the OS double lock is clear.
 		 */
-		asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
-		isb();
+		asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+		if ((dbg_power & 0x1) == 1)
+			err = -EPERM;
+		break;
+	}
 
-		/*
-		 * Clear any configured vector-catch events before
-		 * enabling monitor mode.
-		 */
-		asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
-		isb();
+	if (err) {
+		pr_warning("CPU %d debug is powered down!\n", cpu);
+		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+		return;
 	}
 
+	/*
+	 * Unconditionally clear the lock by writing a value
+	 * other than 0xC5ACCE55 to the access register.
+	 */
+	asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+	isb();
+
+	/*
+	 * Clear any configured vector-catch events before
+	 * enabling monitor mode.
+	 */
+	asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+	isb();
+
+reset_regs:
 	if (enable_monitor_mode())
 		return;
 
 	/* We must also reset any reserved registers. */
-	for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+	raw_num_brps = get_num_brp_resources();
+	for (i = 0; i < raw_num_brps; ++i) {
 		write_wb_reg(ARM_BASE_BCR + i, 0UL);
 		write_wb_reg(ARM_BASE_BVR + i, 0UL);
 	}
@@ -895,6 +957,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 {
 	if (action == CPU_ONLINE)
 		smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
 	return NOTIFY_OK;
 }
 
@@ -905,7 +968,6 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
 static int __init arch_hw_breakpoint_init(void)
 {
 	u32 dscr;
-	cpumask_t cpumask = { CPU_BITS_NONE };
 
 	debug_arch = get_debug_arch();
 
@@ -916,28 +978,31 @@ static int __init arch_hw_breakpoint_init(void)
 
 	/* Determine how many BRPs/WRPs are available. */
 	core_num_brps = get_num_brps();
-	core_num_reserved_brps = get_num_reserved_brps();
 	core_num_wrps = get_num_wrps();
 
-	pr_info("found %d breakpoint and %d watchpoint registers.\n",
-		core_num_brps + core_num_reserved_brps, core_num_wrps);
-
-	if (core_num_reserved_brps)
-		pr_info("%d breakpoint(s) reserved for watchpoint "
-				"single-step.\n", core_num_reserved_brps);
+	/*
+	 * We need to tread carefully here because DBGSWENABLE may be
+	 * driven low on this core and there isn't an architected way to
+	 * determine that.
+	 */
+	register_undef_hook(&debug_reg_hook);
 
 	/*
 	 * Reset the breakpoint resources. We assume that a halting
 	 * debugger will leave the world in a nice state for us.
 	 */
-	on_each_cpu(reset_ctrl_regs, &cpumask, 1);
-	if (!cpumask_empty(&cpumask)) {
+	on_each_cpu(reset_ctrl_regs, NULL, 1);
+	unregister_undef_hook(&debug_reg_hook);
+	if (!cpumask_empty(&debug_err_mask)) {
 		core_num_brps = 0;
-		core_num_reserved_brps = 0;
 		core_num_wrps = 0;
 		return 0;
 	}
 
+	pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+		core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+		"", core_num_wrps);
+
 	ARM_DBG_READ(c1, 0, dscr);
 	if (dscr & ARM_DSCR_HDBGEN) {
 		max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 53919b230e8..7cb29261249 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -59,9 +59,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 #ifdef CONFIG_SMP
 	show_ipi_list(p, prec);
 #endif
-#ifdef CONFIG_LOCAL_TIMERS
-	show_local_irqs(p, prec);
-#endif
 	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	return 0;
 }
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee1d03..9fe8910308a 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
+#include <linux/module.h>
 
 #include "kprobes.h"
 
@@ -971,6 +972,9 @@ const union decode_item kprobe_decode_arm_table[] = {
 
 	DECODE_END
 };
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
 
 static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 00000000000..fc82de8bdcc
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)			\
+	TEST_ARG_REG(reg, val)					\
+	TEST_ARG_REG(14, 99f)					\
+	TEST_ARG_END("")					\
+	"50:	nop			\n\t"			\
+	"1:	"code1 #reg code2"	\n\t"			\
+	"	bx	lr		\n\t"			\
+	".thumb				\n\t"			\
+	"3:	adr	lr, 2f		\n\t"			\
+	"	bx	lr		\n\t"			\
+	".arm				\n\t"			\
+	"2:	nop			\n\t"			\
+	TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)			\
+	TEST_ARG_PTR(reg, val)					\
+	TEST_ARG_REG(14, 99f)					\
+	TEST_ARG_MEM(15, 3f+1)					\
+	TEST_ARG_END("")					\
+	"50:	nop			\n\t"			\
+	"1:	"code1 #reg code2"	\n\t"			\
+	"	bx	lr		\n\t"			\
+	".thumb				\n\t"			\
+	"3:	adr	lr, 2f		\n\t"			\
+	"	bx	lr		\n\t"			\
+	".arm				\n\t"			\
+	"2:	nop			\n\t"			\
+	TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+	kprobe_test_flags = 0;
+
+	TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val)						\
+	TEST_RR(  op "eq" s "	r0,  r",1, VAL1,", r",2, val, "")		\
+	TEST_RR(  op "ne" s "	r1,  r",1, VAL1,", r",2, val, ", lsl #3")	\
+	TEST_RR(  op "cs" s "	r2,  r",3, VAL1,", r",2, val, ", lsr #4")	\
+	TEST_RR(  op "cc" s "	r3,  r",3, VAL1,", r",2, val, ", asr #5")	\
+	TEST_RR(  op "mi" s "	r4,  r",5, VAL1,", r",2, N(val),", asr #6")	\
+	TEST_RR(  op "pl" s "	r5,  r",5, VAL1,", r",2, val, ", ror #7")	\
+	TEST_RR(  op "vs" s "	r6,  r",7, VAL1,", r",2, val, ", rrx")		\
+	TEST_R(   op "vc" s "	r6,  r",7, VAL1,", pc, lsl #3")			\
+	TEST_R(   op "vc" s "	r6,  r",7, VAL1,", sp, lsr #4")			\
+	TEST_R(   op "vc" s "	r6,  pc, r",7, VAL1,", asr #5")			\
+	TEST_R(   op "vc" s "	r6,  sp, r",7, VAL1,", ror #6")			\
+	TEST_RRR( op "hi" s "	r8,  r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+	TEST_RRR( op "ls" s "	r9,  r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+	TEST_RRR( op "ge" s "	r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+	TEST_RRR( op "lt" s "	r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+	TEST_RR(  op "gt" s "	r12, r13"       ", r",14,val, ", ror r",14,7,"")\
+	TEST_RR(  op "le" s "	r14, r",0, val, ", r13"       ", lsl r",14,8,"")\
+	TEST_RR(  op s "	r12, pc"        ", r",14,val, ", ror r",14,7,"")\
+	TEST_RR(  op s "	r14, r",0, val, ", pc"        ", lsl r",14,8,"")\
+	TEST_R(   op "eq" s "	r0,  r",11,VAL1,", #0xf5")			\
+	TEST_R(   op "ne" s "	r11, r",0, VAL1,", #0xf5000000")		\
+	TEST_R(   op s "	r7,  r",8, VAL2,", #0x000af000")		\
+	TEST(     op s "	r4,  pc"        ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val)		\
+	_DATA_PROCESSING_DNM(op,"",val)		\
+	_DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val)						\
+	TEST_RR(  op "ne	r",1, VAL1,", r",2, val, "")			\
+	TEST_RR(  op "eq	r",1, VAL1,", r",2, val, ", lsl #3")		\
+	TEST_RR(  op "cc	r",3, VAL1,", r",2, val, ", lsr #4")		\
+	TEST_RR(  op "cs	r",3, VAL1,", r",2, val, ", asr #5")		\
+	TEST_RR(  op "pl	r",5, VAL1,", r",2, N(val),", asr #6")		\
+	TEST_RR(  op "mi	r",5, VAL1,", r",2, val, ", ror #7")		\
+	TEST_RR(  op "vc	r",7, VAL1,", r",2, val, ", rrx")		\
+	TEST_R (  op "vs	r",7, VAL1,", pc, lsl #3")			\
+	TEST_R (  op "vs	r",7, VAL1,", sp, lsr #4")			\
+	TEST_R(   op "vs	pc, r",7, VAL1,", asr #5")			\
+	TEST_R(   op "vs	sp, r",7, VAL1,", ror #6")			\
+	TEST_RRR( op "ls	r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")	\
+	TEST_RRR( op "hi	r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")	\
+	TEST_RRR( op "lt	r",11,VAL1,", r",14,val, ", asr r",7, 5,"")	\
+	TEST_RRR( op "ge	r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")	\
+	TEST_RR(  op "le	r13"       ", r",14,val, ", ror r",14,7,"")	\
+	TEST_RR(  op "gt	r",0, val, ", r13"       ", lsl r",14,8,"")	\
+	TEST_RR(  op "	pc"        ", r",14,val, ", ror r",14,7,"")		\
+	TEST_RR(  op "	r",0, val, ", pc"        ", lsl r",14,8,"")		\
+	TEST_R(   op "eq	r",11,VAL1,", #0xf5")				\
+	TEST_R(   op "ne	r",0, VAL1,", #0xf5000000")			\
+	TEST_R(   op "	r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val)					\
+	TEST_R(   op "eq" s "	r0,  r",1, val, "")			\
+	TEST_R(   op "ne" s "	r1,  r",1, val, ", lsl #3")		\
+	TEST_R(   op "cs" s "	r2,  r",3, val, ", lsr #4")		\
+	TEST_R(   op "cc" s "	r3,  r",3, val, ", asr #5")		\
+	TEST_R(   op "mi" s "	r4,  r",5, N(val),", asr #6")		\
+	TEST_R(   op "pl" s "	r5,  r",5, val, ", ror #7")		\
+	TEST_R(   op "vs" s "	r6,  r",10,val, ", rrx")		\
+	TEST(     op "vs" s "	r7,  pc, lsl #3")			\
+	TEST(     op "vs" s "	r7,  sp, lsr #4")			\
+	TEST_RR(  op "vc" s "	r8,  r",7, val, ", lsl r",0, 3,"")	\
+	TEST_RR(  op "hi" s "	r9,  r",9, val, ", lsr r",7, 4,"")	\
+	TEST_RR(  op "ls" s "	r10, r",9, val, ", asr r",7, 5,"")	\
+	TEST_RR(  op "ge" s "	r11, r",11,N(val),", asr r",7, 6,"")	\
+	TEST_RR(  op "lt" s "	r12, r",11,val, ", ror r",14,7,"")	\
+	TEST_R(   op "gt" s "	r14, r13"       ", lsl r",14,8,"")	\
+	TEST_R(   op "le" s "	r14, pc"        ", lsl r",14,8,"")	\
+	TEST(     op "eq" s "	r0,  #0xf5")				\
+	TEST(     op "ne" s "	r11, #0xf5000000")			\
+	TEST(     op s "	r7,  #0x000af000")			\
+	TEST(     op s "	r4,  #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val)		\
+	_DATA_PROCESSING_DM(op,"",val)		\
+	_DATA_PROCESSING_DM(op,"s",val)
+
+	DATA_PROCESSING_DNM("and",0xf00f00ff)
+	DATA_PROCESSING_DNM("eor",0xf00f00ff)
+	DATA_PROCESSING_DNM("sub",VAL2)
+	DATA_PROCESSING_DNM("rsb",VAL2)
+	DATA_PROCESSING_DNM("add",VAL2)
+	DATA_PROCESSING_DNM("adc",VAL2)
+	DATA_PROCESSING_DNM("sbc",VAL2)
+	DATA_PROCESSING_DNM("rsc",VAL2)
+	DATA_PROCESSING_NM("tst",0xf00f00ff)
+	DATA_PROCESSING_NM("teq",0xf00f00ff)
+	DATA_PROCESSING_NM("cmp",VAL2)
+	DATA_PROCESSING_NM("cmn",VAL2)
+	DATA_PROCESSING_DNM("orr",0xf00f00ff)
+	DATA_PROCESSING_DM("mov",VAL2)
+	DATA_PROCESSING_DNM("bic",0xf00f00ff)
+	DATA_PROCESSING_DM("mvn",VAL2)
+
+	TEST("mov	ip, sp") /* This has special case emulation code */
+
+	TEST_SUPPORTED("mov	pc, #0x1000");
+	TEST_SUPPORTED("mov	sp, #0x1000");
+	TEST_SUPPORTED("cmp	pc, #0x1000");
+	TEST_SUPPORTED("cmp	sp, #0x1000");
+
+	/* Data-processing with PC as shift*/
+	TEST_UNSUPPORTED(".word 0xe15c0f1e	@ cmp	r12, r14, asl pc")
+	TEST_UNSUPPORTED(".word 0xe1a0cf1e	@ mov	r12, r14, asl pc")
+	TEST_UNSUPPORTED(".word 0xe08caf1e	@ add	r10, r12, r14, asl pc")
+
+	/* Data-processing with PC as shift*/
+	TEST_UNSUPPORTED("movs	pc, r1")
+	TEST_UNSUPPORTED("movs	pc, r1, lsl r2")
+	TEST_UNSUPPORTED("movs	pc, #0x10000")
+	TEST_UNSUPPORTED("adds	pc, lr, r1")
+	TEST_UNSUPPORTED("adds	pc, lr, r1, lsl r2")
+	TEST_UNSUPPORTED("adds	pc, lr, #4")
+
+	/* Data-processing with SP as target */
+	TEST("add	sp, sp, #16")
+	TEST("sub	sp, sp, #8")
+	TEST("bic	sp, sp, #0x20")
+	TEST("orr	sp, sp, #0x20")
+	TEST_PR( "add	sp, r",10,0,", r",11,4,"")
+	TEST_PRR("add	sp, r",10,0,", r",11,4,", asl r",12,1,"")
+	TEST_P(  "mov	sp, r",10,0,"")
+	TEST_PR( "mov	sp, r",10,0,", asl r",12,0,"")
+
+	/* Data-processing with PC as target */
+	TEST_BF(   "add	pc, pc, #2f-1b-8")
+	TEST_BF_R ("add	pc, pc, r",14,2f-1f-8,"")
+	TEST_BF_R ("add	pc, r",14,2f-1f-8,", pc")
+	TEST_BF_R ("mov	pc, r",0,2f,"")
+	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
+	TEST_BB(   "sub	pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
+	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
+	TEST_RR(   "add	pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+	TEST_ARM_TO_THUMB_INTERWORK_R("add	pc, pc, r",0,3f-1f-8+1,"")
+	TEST_ARM_TO_THUMB_INTERWORK_R("sub	pc, r",0,3f+8+1,", #8")
+#endif
+	TEST_GROUP("Miscellaneous instructions")
+
+	TEST("mrs	r0, cpsr")
+	TEST("mrspl	r7, cpsr")
+	TEST("mrs	r14, cpsr")
+	TEST_UNSUPPORTED(".word 0xe10ff000	@ mrs r15, cpsr")
+	TEST_UNSUPPORTED("mrs	r0, spsr")
+	TEST_UNSUPPORTED("mrs	lr, spsr")
+
+	TEST_UNSUPPORTED("msr	cpsr, r0")
+	TEST_UNSUPPORTED("msr	cpsr_f, lr")
+	TEST_UNSUPPORTED("msr	spsr, r0")
+
+	TEST_BF_R("bx	r",0,2f,"")
+	TEST_BB_R("bx	r",7,2f,"")
+	TEST_BF_R("bxeq	r",14,2f,"")
+
+	TEST_R("clz	r0, r",0, 0x0,"")
+	TEST_R("clzeq	r7, r",14,0x1,"")
+	TEST_R("clz	lr, r",7, 0xffffffff,"")
+	TEST(  "clz	r4, sp")
+	TEST_UNSUPPORTED(".word 0x016fff10	@ clz pc, r0")
+	TEST_UNSUPPORTED(".word 0x016f0f1f	@ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+	TEST_UNSUPPORTED("bxj	r0")
+#endif
+
+	TEST_BF_R("blx	r",0,2f,"")
+	TEST_BB_R("blx	r",7,2f,"")
+	TEST_BF_R("blxeq	r",14,2f,"")
+	TEST_UNSUPPORTED(".word 0x0120003f	@ blx pc")
+
+	TEST_RR(   "qadd	r0, r",1, VAL1,", r",2, VAL2,"")
+	TEST_RR(   "qaddvs	lr, r",9, VAL2,", r",8, VAL1,"")
+	TEST_R(    "qadd	lr, r",9, VAL2,", r13")
+	TEST_RR(   "qsub	r0, r",1, VAL1,", r",2, VAL2,"")
+	TEST_RR(   "qsubvs	lr, r",9, VAL2,", r",8, VAL1,"")
+	TEST_R(    "qsub	lr, r",9, VAL2,", r13")
+	TEST_RR(   "qdadd	r0, r",1, VAL1,", r",2, VAL2,"")
+	TEST_RR(   "qdaddvs	lr, r",9, VAL2,", r",8, VAL1,"")
+	TEST_R(    "qdadd	lr, r",9, VAL2,", r13")
+	TEST_RR(   "qdsub	r0, r",1, VAL1,", r",2, VAL2,"")
+	TEST_RR(   "qdsubvs	lr, r",9, VAL2,", r",8, VAL1,"")
+	TEST_R(    "qdsub	lr, r",9, VAL2,", r13")
+	TEST_UNSUPPORTED(".word 0xe101f050	@ qadd pc, r0, r1")
+	TEST_UNSUPPORTED(".word 0xe121f050	@ qsub pc, r0, r1")
+	TEST_UNSUPPORTED(".word 0xe141f050	@ qdadd pc, r0, r1")
+	TEST_UNSUPPORTED(".word 0xe161f050	@ qdsub pc, r0, r1")
+	TEST_UNSUPPORTED(".word 0xe16f2050	@ qdsub r2, r0, pc")
+	TEST_UNSUPPORTED(".word 0xe161205f	@ qdsub r2, pc, r1")
+
+	TEST_UNSUPPORTED("bkpt	0xffff")
+	TEST_UNSUPPORTED("bkpt	0x0000")
+
+	TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")