Merge branch 'samsung/exynos-multiplatform' into next/multiplatform

These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches.  This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.

A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to

* The ASoC conversion to dmaengine won't make it unless someone
  who knows that code better steps up to do it right away. This
  means that we won't have audio in a 3.10 multiplatform kernel
  on Exynos, but it will still work for users that don't enable
  multiplatform.

* The irqchip (combiner), clk and clksource patches are all based
  on top   of other changesets we pulled in from your trees, so I
  would not make them part of the next/multiplatform branch. We can
  apply them on top of the next/drivers branch once they are
  tested successfully.

* A trivial patch is needed in the end to actually make
  CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
  We will do that as a separate patch once everything else is
  there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 126 insertions, 0 deletions

diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
new file mode 100644
index 00000000000..b17fdb7fbd3
--- /dev/null
+++ b/arch/arm/include/debug/exynos.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART	0x13800000
+#define EXYNOS5_PA_UART	0x12C00000
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
+		ldreq	\rp, =EXYNOS5_PA_UART
+		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
+		ldr	\rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
new file mode 100644
index 00000000000..f3a9cff6d5d
--- /dev/null
+++ b/arch/arm/include/debug/samsung.S
@@ -0,0 +1,87 @@
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S5PV210/S5PC110 implementations are as belows. */
+
+	.macro fifo_level_s5pv210 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
+	.endm
+
+	.macro  fifo_full_s5pv210 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S5PV210_UFSTAT_TXFULL
+	.endm
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+	.macro fifo_level_s3c2440 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2440
+#endif
+
+	.macro  fifo_full_s3c2440 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S3C2440_UFSTAT_TXFULL
+	.endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+	.macro	senduart,rd,rx
+		strb 	\rd, [\rx, # S3C2410_UTXH]
+	.endm
+
+	.macro	busyuart, rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFCON]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_full \rd, \rx
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
+
+	.macro	waituart,rd,rx
+		ldr	\rd, [\rx, # S3C2410_UFCON]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_level \rd, \rx
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm