Merge branch 'at91' into devel

20 files changed, 1024 insertions, 247 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9fa5fa..4ffed9ae729 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,21 +1,33 @@
 ifeq ($(CONFIG_OF),y)
 
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
-	at91sam9263ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9m10g45ek.dtb \
-	at91sam9n12ek.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	kizbox.dtb \
-	tny_a9260.dtb \
-	tny_a9263.dtb \
-	tny_a9g20.dtb \
-	usb_a9260.dtb \
-	usb_a9263.dtb \
-	usb_a9g20.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+# sam9260
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
+dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
+dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
+# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+# sam9n12
+dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d410581a5a8..9a24ffbb723 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -98,40 +98,161 @@
 				interrupts = <26 4 0 27 4 0 28 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+					};
+				};
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<1 4 0x1 0x0	/* PB4 periph A */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<1 26 0x1 0x0	/* PB26 periph A */
+							 1 27 0x1 0x0>;	/* PB27 periph A */
+					};
+
+					pinctrl_uart0_dtr_dsr: uart0_dtr_dsr-0 {
+						atmel,pins =
+							<1 24 0x1 0x0	/* PB24 periph A */
+							 1 22 0x1 0x0>;	/* PB22 periph A */
+					};
+
+					pinctrl_uart0_dcd: uart0_dcd-0 {
+						atmel,pins =
+							<1 23 0x1 0x0>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart0_ri: uart0_ri-0 {
+						atmel,pins =
+							<1 25 0x1 0x0>;	/* PB25 periph A */
+					};
+				};
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<2 6 0x1 0x1	/* PB6 periph A with pullup */
+							 2 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<1 28 0x1 0x0	/* PB28 periph A */
+							 1 29 0x1 0x0>;	/* PB29 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB8 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB9 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<0 4 0x1 0x0	/* PA4 periph A */
+							 0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<2 10 0x1 0x1	/* PB10 periph A with pullup */
+							 2 11 0x1 0x0>;	/* PB11 periph A */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<3 8 0x2 0x0	/* PB8 periph B */
+							 3 10 0x2 0x0>;	/* PB10 periph B */
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4: uart4-0 {
+						atmel,pins =
+							<0 31 0x2 0x1	/* PA31 periph B with pullup */
+							 0 30 0x2 0x0>;	/* PA30 periph B */
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5: uart5-0 {
+						atmel,pins =
+							<2 12 0x1 0x1	/* PB12 periph A with pullup */
+							 2 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 13 0x0 0x1	/* PC13 gpio RDY pin pull_up */
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -141,6 +262,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -150,6 +273,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -159,6 +284,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -168,6 +295,8 @@
 				interrupts = <23 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
@@ -177,6 +306,8 @@
 				interrupts = <24 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4>;
 				status = "disabled";
 			};
 
@@ -186,6 +317,8 @@
 				interrupts = <25 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart5>;
 				status = "disabled";
 			};
 
@@ -257,6 +390,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 13 0
 				 &pioC 14 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 3e6e5c1abbf..251ccec430a 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -89,60 +89,137 @@
 				reg = <0xfffffd10 0x10>;
 			};
 
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
 
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
 
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<2 30 0x1 0x0	/* PC30 periph A */
+							 2 31 0x1 0x1>;	/* PC31 periph with pullup */
+					};
+				};
 
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 26 0x1 0x1	/* PA26 periph A with pullup */
+							 0 27 0x1 0x0>;	/* PA27 periph A */
+					};
 
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 28 0x1 0x0	/* PA28 periph A */
+							 0 29 0x1 0x0>;	/* PA29 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<3 0 0x1 0x1	/* PD0 periph A with pullup */
+							 3 1 0x1 0x0>;	/* PD1 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 7 0x2 0x0	/* PD7 periph B */
+							 3 8 0x2 0x0>;	/* PD8 periph B */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<3 2 0x1 0x1	/* PD2 periph A with pullup */
+							 3 3 0x1 0x0>;	/* PD3 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<3 5 0x2 0x0	/* PD5 periph B */
+							 4 6 0x2 0x0>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<0 22 0x0 0x1	/* PA22 gpio RDY pin pull_up*/
+							 3 15 0x0 0x1>;	/* PD15 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -152,6 +229,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -161,6 +240,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -170,6 +251,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -206,6 +289,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioA 22 0
 				 &pioD 15 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index f86ac4b609f..7cfe9d521f1 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -38,6 +38,7 @@
 			};
 
 			usart0: serial@fff8c000 {
+				pinctrl-0 = <&pinctrl_uart0 &pinctrl_uart0_rts_cts>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
new file mode 100644
index 00000000000..fbe7a7089c2
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel, at91sam9g15, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+				       0x00040000 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
new file mode 100644
index 00000000000..86dd3f6d938
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g15.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index e6391a4e664..689323d8e64 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -35,6 +35,12 @@
 			};
 
 			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_uart0
+					 &pinctrl_uart0_rts_cts
+					 &pinctrl_uart0_dtr_dsr
+					 &pinctrl_uart0_dcd
+					 &pinctrl_uart0_ri>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
new file mode 100644
index 00000000000..05a718fb83c
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel, at91sam9g25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 877c08f0676..c5ab16fba05 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -7,55 +7,10 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x5.dtsi"
-/include/ "at91sam9x5cm.dtsi"
+/include/ "at91sam9g25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25-EK";
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
-			i2c2: i2c@f8018000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
new file mode 100644
index 00000000000..f9d14a72279
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel, at91sam9g35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
new file mode 100644
index 00000000000..95944bdd798
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030d61f..c340f6635d8 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,60 +108,151 @@
 				interrupts = <21 4 0>;
 			};
 
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
 
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<1 19 0x1 0x1	/* PB19 periph A with pullup */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<1 17 0x2 0x0	/* PB17 periph B */
+							 1 15 0x2 0x0>;	/* PB15 periph B */
+					};
+				};
 
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<1 4 0x1 0x1	/* PB4 periph A with pullup */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 16 0x1 0x0	/* PD16 periph A */
+							 3 17 0x1 0x0>;	/* PD17 periph A */
+					};
+				};
 
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<1 6 0x1 0x1	/* PB6 periph A with pullup */
+							 1 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<2 9 0x2 0x0	/* PC9 periph B */
+							 2 11 0x2 0x0>;	/* PC11 periph B */
+					};
+				};
 
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <5 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB9 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<0 23 0x2 0x0	/* PA23 periph B */
+							 0 24 0x2 0x0>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<2 8 0x0 0x1	/* PC8 gpio RDY pin pull_up*/
+							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -171,6 +262,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -180,6 +273,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -189,6 +284,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -198,6 +295,8 @@
 				interrupts = <10 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
@@ -273,6 +372,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioC 8 0
 				 &pioC 14 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e1dd43f62..6aa28b94190 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -39,6 +39,7 @@
 			};
 
 			usart1: serial@fff90000 {
+				pinctrl-0 = <&pinctrl_uart0 &pinctrl_uart1_rts_cts>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 82508d68aa7..7b644c5b0be 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -102,50 +102,150 @@
 				interrupts = <20 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph with pullup */
+					};
+				};
 
-			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 0 0x1 0x0>;	/* PA0 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0	/* PA2 periph A */
+							 0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<0 6 0x1 0x1	/* PA6 periph A with pullup */
+							 0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<0 8 0x1 0x1	/* PA8 periph A with pullup */
+							 0 7 0x1 0x0>;	/* PA7 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<2 23 0x2 0x1	/* PC23 periph B with pullup */
+							 2 22 0x2 0x0>;	/* PC22 periph B */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<2 24 0x2 0x0	/* PC24 periph B */
+							 2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<2 9 0x3 0x1	/* PC9 periph C with pullup */
+							 2 8 0x3 0x0>;	/* PC8 periph C */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<2 16 0x3 0x1	/* PC17 periph C with pullup */
+							 2 17 0x3 0x0>;	/* PC16 periph C */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<3 5 0x0 0x1	/* PD5 gpio RDY pin pull_up*/
+							 3 4 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -155,6 +255,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -164,6 +266,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -173,6 +277,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -182,6 +288,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
@@ -215,6 +323,8 @@
 			       >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 0
 				 &pioD 4 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
new file mode 100644
index 00000000000..956c65f7c39
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel, at91sam9x25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
new file mode 100644
index 00000000000..af907eaa1f2
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
new file mode 100644
index 00000000000..fb102d6126c
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel, at91sam9x35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
new file mode 100644
index 00000000000..5ccb607b541
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 03fc136421c..6a40b777ea4 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,50 +111,150 @@
 				interrupts = <21 4 0>;
 			};
 
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph A with pullup */
+					};
+				};
 
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 0 0x1 0x1	/* PA0 periph A with pullup */
+							 0 1 0x1 0x0>;	/* PA1 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0	/* PA2 periph A */
+							 0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
 
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<0 5 0x1 0x1	/* PA5 periph A with pullup */
+							 0 6 0x1 0x0>;	/* PA6 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 27 0x3 0x0	/* PC27 periph C */
+							 3 28 0x3 0x0>;	/* PC28 periph C */
+					};
+				};
 
-			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x0>;	/* PA8 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<0 0 0x2 0x0	/* PB0 periph B */
+							 0 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<3 23 0x2 0x1	/* PC22 periph B with pullup */
+							 3 23 0x2 0x0>;	/* PC23 periph B */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<3 24 0x2 0x0	/* PC24 periph B */
+							 3 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<3 8 0x3 0x0	/* PC8 periph C */
+							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<3 16 0x3 0x0	/* PC16 periph C */
+							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
+							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -164,6 +264,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -173,6 +275,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -182,6 +286,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -273,6 +379,8 @@
 			      >;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
 			gpios = <&pioD 5 0
 				 &pioD 4 0
 				 0
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
new file mode 100644
index 00000000000..cc9730c6018
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,59 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c2: i2c@f8018000 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+};