diff options
| author | Philipp Zabel <p.zabel@pengutronix.de> | 2013-06-21 15:36:11 +0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2013-07-15 08:28:05 +0800 |
| commit | f5786b8e934e77f76f689c515baa582ff5a196ec (patch) | |
| tree | 15cf3ca319a4adce435134b7ef41fc547c9c2876 /arch/arm/boot/dts/imx53.dtsi | |
| parent | ad81f0545ef01ea651886dddac4bef6cec930092 (diff) | |
ARM i.MX53: Fix UART pad configuration
The current default pad configuration for UART RX and TX pads sets a 360k
pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to
me that in idle state, the UART has to keep the signal high against a
pull-down resistor.
This patch instead sets a 100k pull-up, which incidentally corresponds to the
register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad,
and removes the write to the reserved bit.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx53.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx53.dtsi | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 3895fbba8fc..569aa9f2c4e 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -725,15 +725,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 >; }; @@ -748,8 +748,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; @@ -766,17 +766,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 >; }; @@ -785,8 +785,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 >; }; }; @@ -794,8 +794,8 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 >; }; }; |