Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 438 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
new file mode 100644
index 00000000000..47df48a6ddb
--- /dev/null
+++ b/arch/alpha/kernel/sys_sio.c
@@ -0,0 +1,438 @@
+/*
+ *	linux/arch/alpha/kernel/sys_sio.c
+ *
+ *	Copyright (C) 1995 David A Rusling
+ *	Copyright (C) 1996 Jay A Estabrook
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code for all boards that route the PCI interrupts through the SIO
+ * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
+ * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+
+#include <asm/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_apecs.h>
+#include <asm/core_lca.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+/* Save LCA configuration data as the console had it set up.  */
+struct 
+{
+	unsigned int orig_route_tab; /* for SAVE/RESTORE */
+} saved_config __attribute((common));
+#endif
+
+
+static void __init
+sio_init_irq(void)
+{
+	if (alpha_using_srm)
+		alpha_mv.device_interrupt = srm_device_interrupt;
+
+	init_i8259a_irqs();
+	common_init_isa_dma();
+}
+
+static inline void __init
+alphabook1_init_arch(void)
+{
+	/* The AlphaBook1 has LCD video fixed at 800x600,
+	   37 rows and 100 cols. */
+	screen_info.orig_y = 37;
+	screen_info.orig_video_cols = 100;
+	screen_info.orig_video_lines = 37;
+
+	lca_init_arch();
+}
+
+
+/*
+ * sio_route_tab selects irq routing in PCI/ISA bridge so that:
+ *		PIRQ0 -> irq 15
+ *		PIRQ1 -> irq  9
+ *		PIRQ2 -> irq 10
+ *		PIRQ3 -> irq 11
+ *
+ * This probably ought to be configurable via MILO.  For
+ * example, sound boards seem to like using IRQ 9.
+ *
+ * This is NOT how we should do it. PIRQ0-X should have
+ * their own IRQ's, the way intel uses the IO-APIC irq's.
+ */
+
+static void __init
+sio_pci_route(void)
+{
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	/* First, read and save the original setting. */
+	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				  &saved_config.orig_route_tab);
+	printk("%s: PIRQ original 0x%x new 0x%x\n", __FUNCTION__,
+	       saved_config.orig_route_tab, alpha_mv.sys.sio.route_tab);
+#endif
+
+	/* Now override with desired setting. */
+	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				   alpha_mv.sys.sio.route_tab);
+}
+
+static unsigned int __init
+sio_collect_irq_levels(void)
+{
+	unsigned int level_bits = 0;
+	struct pci_dev *dev = NULL;
+
+	/* Iterate through the devices, collecting IRQ levels.  */
+	while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
+		    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
+			continue;
+
+		if (dev->irq)
+			level_bits |= (1 << dev->irq);
+	}
+	return level_bits;
+}
+
+static void __init
+sio_fixup_irq_levels(unsigned int level_bits)
+{
+	unsigned int old_level_bits;
+
+	/*
+	 * Now, make all PCI interrupts level sensitive.  Notice:
+	 * these registers must be accessed byte-wise.  inw()/outw()
+	 * don't work.
+	 *
+	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
+	 *  so that the only bits getting set are for devices actually found.
+	 * Note that we do preserve the remainder of the bits, which we hope
+	 *  will be set correctly by ARC/SRM.
+	 *
+	 * Note: we at least preserve any level-set bits on AlphaBook1
+	 */
+	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
+
+	level_bits |= (old_level_bits & 0x71ff);
+
+	outb((level_bits >> 0) & 0xff, 0x4d0);
+	outb((level_bits >> 8) & 0xff, 0x4d1);
+}
+
+static inline int __init
+noname_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	/*
+	 * The Noname board has 5 PCI slots with each of the 4
+	 * interrupt pins routed to different pins on the PCI/ISA
+	 * bridge (PIRQ0-PIRQ3).  The table below is based on
+	 * information available at:
+	 *
+	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
+	 *
+	 * I have no information on the Avanti interrupt routing, but
+	 * the routing seems to be identical to the Noname except
+	 * that the Avanti has an additional slot whose routing I'm
+	 * unsure of.
+	 *
+	 * pirq_tab[0] is a fake entry to deal with old PCI boards
+	 * that have the interrupt pin number hardwired to 0 (meaning
+	 * that they use the default INTA line, if they are interrupt
+	 * driven at all).
+	 */
+	static char irq_tab[][5] __initdata = {
+		/*INT A   B   C   D */
+		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
+		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
+		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
+		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
+		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
+		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
+		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
+		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
+		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
+	};
+	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
+	int irq = COMMON_TABLE_LOOKUP, tmp;
+	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
+	return irq >= 0 ? tmp : -1;
+}
+
+static inline int __init
+p2k_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static char irq_tab[][5] __initdata = {
+		/*INT A   B   C   D */
+		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
+		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
+		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
+		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
+		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
+		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
+		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
+	};
+	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
+	int irq = COMMON_TABLE_LOOKUP, tmp;
+	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
+	return irq >= 0 ? tmp : -1;
+}
+
+static inline void __init
+noname_init_pci(void)
+{
+	common_init_pci();
+	sio_pci_route();
+	sio_fixup_irq_levels(sio_collect_irq_levels());
+	ns87312_enable_ide(0x26e);
+}
+
+static inline void __init
+alphabook1_init_pci(void)
+{
+	struct pci_dev *dev;
+	unsigned char orig, config;
+
+	common_init_pci();
+	sio_pci_route();
+
+	/*
+	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
+	 * is sensitive to PCI bus bursts, so we must DISABLE
+	 * burst mode for the NCR 8xx SCSI... :-(
+	 *
+	 * Note that the NCR810 SCSI driver must preserve the
+	 * setting of the bit in order for this to work.  At the
+	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
+	 * 53c7,8xx.c DOES.
+	 */
+
+	dev = NULL;
+	while ((dev = pci_find_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
+                if (dev->device == PCI_DEVICE_ID_NCR_53C810
+		    || dev->device == PCI_DEVICE_ID_NCR_53C815
+		    || dev->device == PCI_DEVICE_ID_NCR_53C820
+		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
+			unsigned long io_port;
+			unsigned char ctest4;
+
+			io_port = dev->resource[0].start;
+			ctest4 = inb(io_port+0x21);
+			if (!(ctest4 & 0x80)) {
+				printk("AlphaBook1 NCR init: setting"
+				       " burst disable\n");
+				outb(ctest4 | 0x80, io_port+0x21);
+			}
+                }
+	}
+
+	/* Do not set *ANY* level triggers for AlphaBook1. */
+	sio_fixup_irq_levels(0);
+
+	/* Make sure that register PR1 indicates 1Mb mem */
+	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
+	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
+	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
+	if ((config & 0xc0) != 0xc0) {
+		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
+		config |= 0xc0;
+		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
+	}
+	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
+}
+
+void
+sio_kill_arch(int mode)
+{
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	/* Since we cannot read the PCI DMA Window CSRs, we
+	 * cannot restore them here.
+	 *
+	 * However, we CAN read the PIRQ route register, so restore it
+	 * now...
+	 */
+ 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
+				   saved_config.orig_route_tab);
+#endif
+}
+
+
+/*
+ * The System Vectors
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
+struct alpha_machine_vector alphabook1_mv __initmv = {
+	.vector_name		= "AlphaBook1",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= alphabook1_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= alphabook1_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
+		.route_tab	= 0x0e0f0a0a,
+	}}
+};
+ALIAS_MV(alphabook1)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
+struct alpha_machine_vector avanti_mv __initmv = {
+	.vector_name		= "Avanti",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a0e0f,
+	}}
+};
+ALIAS_MV(avanti)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
+struct alpha_machine_vector noname_mv __initmv = {
+	.vector_name		= "Noname",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= srm_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		/* For UDB, the only available PCI slot must not map to IRQ 9,
+		   since that's the builtin MSS sound chip. That PCI slot
+		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
+		   instead.
+
+		   Unfortunately we have to do this for NONAME as well, since
+		   they are co-indicated when the platform type "Noname" is
+		   selected... :-(  */
+
+		.route_tab	= 0x0b0a0f0d,
+	}}
+};
+ALIAS_MV(noname)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
+struct alpha_machine_vector p2k_mv __initmv = {
+	.vector_name		= "Platform2000",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_LCA_IO,
+	.machine_check		= lca_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= srm_device_interrupt,
+
+	.init_arch		= lca_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= p2k_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a090f,
+	}}
+};
+ALIAS_MV(p2k)
+#endif
+
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
+struct alpha_machine_vector xl_mv __initmv = {
+	.vector_name		= "XL",
+	DO_EV4_MMU,
+	DO_DEFAULT_RTC,
+	DO_APECS_IO,
+	.machine_check		= apecs_machine_check,
+	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
+	.min_io_address		= DEFAULT_IO_BASE,
+	.min_mem_address	= XL_DEFAULT_MEM_BASE,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= isa_device_interrupt,
+
+	.init_arch		= apecs_init_arch,
+	.init_irq		= sio_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= noname_init_pci,
+	.kill_arch		= sio_kill_arch,
+	.pci_map_irq		= noname_map_irq,
+	.pci_swizzle		= common_swizzle,
+
+	.sys = { .sio = {
+		.route_tab	= 0x0b0a090f,
+	}}
+};
+ALIAS_MV(xl)
+#endif