Merge branch 'imx/dt' into next/dt

53 files changed, 801 insertions, 357 deletions

diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj
index cf63f264ce0..9a3cb88ade4 100644
--- a/Documentation/ABI/obsolete/proc-pid-oom_adj
+++ b/Documentation/ABI/obsolete/proc-pid-oom_adj
@@ -14,7 +14,7 @@ Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
 
 	A much more powerful interface, /proc/<pid>/oom_score_adj, was
 	introduced with the oom killer rewrite that allows users to increase or
-	decrease the badness() score linearly.  This interface will replace
+	decrease the badness score linearly.  This interface will replace
 	/proc/<pid>/oom_adj.
 
 	A warning will be emitted to the kernel log if an application uses this
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
new file mode 100644
index 00000000000..9de269bb0ae
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
@@ -0,0 +1,21 @@
+What:		/sys/bus/i2c/devices/.../device
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show what device is attached
+		NONE - no device
+		USB - USB device is attached
+		UART - UART is attached
+		CHARGER - Charger is attaced
+		JIG - JIG is attached
+
+What:		/sys/bus/i2c/devices/.../switch
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show or set the state of manual switch
+		VAUDIO - switch to VAUDIO path
+		UART - switch to UART path
+		AUDIO - switch to AUDIO path
+		DHOST - switch to DHOST path
+		AUTO - switch automatically by device
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index cfcec3bffc0..9489ea8e294 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -10,3 +10,26 @@ KernelVersion:	2.6.35
 Contact:	masa-korg@dsn.okisemi.com
 Description:	Write/read Option ROM data.
 
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together. ]
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index d568bc235bc..a0b6250add7 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -613,13 +613,13 @@ to use the dma_sync_*() interfaces.
 				pass_to_upper_layers(cp->rx_buf);
 				make_and_setup_new_rx_buf(cp);
 			} else {
-				/* Just sync the buffer and give it back
-				 * to the card.
+				/* CPU should not write to
+				 * DMA_FROM_DEVICE-mapped area,
+				 * so dma_sync_single_for_device() is
+				 * not needed here. It would be required
+				 * for DMA_BIDIRECTIONAL mapping if
+				 * the memory was modified.
 				 */
-				dma_sync_single_for_device(&cp->dev,
-							   cp->rx_dma,
-							   cp->rx_len,
-							   DMA_FROM_DEVICE);
 				give_rx_buf_to_card(cp);
 			}
 		}
diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml
index 227e7ac45a0..c57d1ec6291 100644
--- a/Documentation/DocBook/v4l/io.xml
+++ b/Documentation/DocBook/v4l/io.xml
@@ -210,7 +210,7 @@ for (i = 0; i &lt; reqbuf.count; i++)
       <programlisting>
 &v4l2-requestbuffers; reqbuf;
 /* Our current format uses 3 planes per buffer */
-#define FMT_NUM_PLANES = 3;
+#define FMT_NUM_PLANES = 3
 
 struct {
 	void *start[FMT_NUM_PLANES];
diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt
index a8536cb8809..bf82851a0e5 100644
--- a/Documentation/RCU/NMI-RCU.txt
+++ b/Documentation/RCU/NMI-RCU.txt
@@ -5,8 +5,8 @@ Although RCU is usually used to protect read-mostly data structures,
 it is possible to use RCU to provide dynamic non-maskable interrupt
 handlers, as well as dynamic irq handlers.  This document describes
 how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer
-work in "arch/i386/oprofile/nmi_timer_int.c" and in
-"arch/i386/kernel/traps.c".
+work in "arch/x86/oprofile/nmi_timer_int.c" and in
+"arch/x86/kernel/traps.c".
 
 The relevant pieces of code are listed below, each followed by a
 brief explanation.
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 7b13be41c08..dc0e33210d7 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -53,8 +53,8 @@ kernel patches.
 
 12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
     CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
-    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_ATOMIC_SLEEP all simultaneously
-    enabled.
+    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_ATOMIC_SLEEP, CONFIG_PROVE_RCU
+    and CONFIG_DEBUG_OBJECTS_RCU_HEAD all simultaneously enabled.
 
 13: Has been build- and runtime tested with and without CONFIG_SMP and
     CONFIG_PREEMPT.
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index c12bfc1a00c..359587b2367 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,10 +8,13 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
+  S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
   are supported.
 
-  Support for the S3C2400 and S3C24A0 series are in progress.
+  Support for the S3C2400 and S3C24A0 series was never completed and the
+  corresponding code has been removed after a while.  If someone wishes to
+  revive this effort, partial support can be retrieved from earlier Linux
+  versions.
 
   The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
   included under the arch/arm/mach-s3c2416 directory. Note, whilst core
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index f65274081c8..d8147b336c3 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -45,9 +45,13 @@ device.
 
 rq_affinity (RW)
 ----------------
-If this option is enabled, the block layer will migrate request completions
-to the CPU that originally submitted the request. For some workloads
-this provides a significant reduction in CPU cycles due to caching effects.
+If this option is '1', the block layer will migrate request completions to the
+cpu "group" that originally submitted the request. For some workloads this
+provides a significant reduction in CPU cycles due to caching effects.
+
+For storage configurations that need to maximize distribution of completion
+processing setting this option to '2' forces the completion to run on the
+requesting cpu (bypassing the "group" aggregation logic).
 
 scheduler (RW)
 --------------
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
index 0e8f618ab53..bd85fb9dc6e 100644
--- a/Documentation/blockdev/README.DAC960
+++ b/Documentation/blockdev/README.DAC960
@@ -214,7 +214,7 @@ replacing "/usr/src" with wherever you keep your Linux kernel source tree:
   make config
   make bzImage (or zImage)
 
-Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your
+Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
 standard kernel, run lilo if appropriate, and reboot.
 
 To create the necessary devices in /dev, the "make_rd" script included in
diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt
index 6c820baa19a..fa72e97dd66 100644
--- a/Documentation/blockdev/ramdisk.txt
+++ b/Documentation/blockdev/ramdisk.txt
@@ -64,9 +64,9 @@ the RAM disk dynamically grows as data is being written into it, a size field
 is not required. Bits 11 to 13 are not currently used and may as well be zero.
 These numbers are no magical secrets, as seen below:
 
-./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
-./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
-./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
+./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
+./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
+./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
 
 Consider a typical two floppy disk setup, where you will have the
 kernel on disk one, and have already put a RAM disk image onto disk #2.
@@ -85,7 +85,7 @@ The command line equivalent is: "prompt_ramdisk=1"
 Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
 So to create disk one of the set, you would do:
 
-	/usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0
+	/usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
 	/usr/src/linux# rdev /dev/fd0 /dev/fd0
 	/usr/src/linux# rdev -r /dev/fd0 49152
 
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 06eb6d957c8..6f3c598971f 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -380,7 +380,7 @@ will be charged as a new owner of it.
 
 5.2 stat file
 
-memory.stat file includes following statistics
+5.2.1 memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
@@ -438,6 +438,89 @@ Note:
 	 file_mapped is accounted only when the memory cgroup is owner of page
 	 cache.)
 
+5.2.2 memory.vmscan_stat
+
+memory.vmscan_stat includes statistics information for memory scanning and
+freeing, reclaiming. The statistics shows memory scanning information since
+memory cgroup creation and can be reset to 0 by writing 0 as
+
+ #echo 0 > ../memory.vmscan_stat
+
+This file contains following statistics.
+
+[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
+[param]_elapsed_ns_by_[reason]_[under_hierarchy]
+
+For example,
+
+  scanned_file_pages_by_limit indicates the number of scanned
+  file pages at vmscan.
+
+Now, 3 parameters are supported
+
+  scanned - the number of pages scanned by vmscan
+  rotated - the number of pages activated at vmscan
+  freed   - the number of pages freed by vmscan
+
+If "rotated" is high against scanned/freed, the memcg seems busy.
+
+Now, 2 reason are supported
+
+  limit - the memory cgroup's limit
+  system - global memory pressure + softlimit
+           (global memory pressure not under softlimit is not handled now)
+
+When under_hierarchy is added in the tail, the number indicates the
+total memcg scan of its children and itself.
+
+elapsed_ns is a elapsed time in nanosecond. This may include sleep time
+and not indicates CPU usage. So, please take this as just showing
+latency.
+
+Here is an example.
+
+# cat /cgroup/memory/A/memory.vmscan_stat
+scanned_pages_by_limit 9471864
+scanned_anon_pages_by_limit 6640629
+scanned_file_pages_by_limit 2831235
+rotated_pages_by_limit 4243974
+rotated_anon_pages_by_limit 3971968
+rotated_file_pages_by_limit 272006
+freed_pages_by_limit 2318492
+freed_anon_pages_by_limit 962052
+freed_file_pages_by_limit 1356440
+elapsed_ns_by_limit 351386416101
+scanned_pages_by_system 0
+scanned_anon_pages_by_system 0
+scanned_file_pages_by_system 0
+rotated_pages_by_system 0
+rotated_anon_pages_by_system 0
+rotated_file_pages_by_system 0
+freed_pages_by_system 0
+freed_anon_pages_by_system 0
+freed_file_pages_by_system 0
+elapsed_ns_by_system 0
+scanned_pages_by_limit_under_hierarchy 9471864
+scanned_anon_pages_by_limit_under_hierarchy 6640629
+scanned_file_pages_by_limit_under_hierarchy 2831235
+rotated_pages_by_limit_under_hierarchy 4243974
+rotated_anon_pages_by_limit_under_hierarchy 3971968
+rotated_file_pages_by_limit_under_hierarchy 272006
+freed_pages_by_limit_under_hierarchy 2318492
+freed_anon_pages_by_limit_under_hierarchy 962052
+freed_file_pages_by_limit_under_hierarchy 1356440
+elapsed_ns_by_limit_under_hierarchy 351386416101
+scanned_pages_by_system_under_hierarchy 0
+scanned_anon_pages_by_system_under_hierarchy 0
+scanned_file_pages_by_system_under_hierarchy 0
+rotated_pages_by_system_under_hierarchy 0
+rotated_anon_pages_by_system_under_hierarchy 0
+rotated_file_pages_by_system_under_hierarchy 0
+freed_pages_by_system_under_hierarchy 0
+freed_anon_pages_by_system_under_hierarchy 0
+freed_file_pages_by_system_under_hierarchy 0
+elapsed_ns_by_system_under_hierarchy 0
+
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 6c30e930c12..c436096351f 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -168,7 +168,7 @@ in-chipset dynamic frequency switching to policy->min, the upper limit
 to policy->max, and -if supported- select a performance-oriented
 setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a
 powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check
-the reference implementation in arch/i386/kernel/cpu/cpufreq/longrun.c
+the reference implementation in drivers/cpufreq/longrun.c
 
 
 
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt
new file mode 100644
index 00000000000..6b07f65b32d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sirf.txt
@@ -0,0 +1,3 @@
+prima2 "cb" evalutation board
+Required root node properties:
+    - compatible = "sirf,prima2-cb", "sirf,prima2";
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
new file mode 100644
index 00000000000..6f1ed830b4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/xilinx.txt
@@ -0,0 +1,7 @@
+Xilinx Zynq EP107 Emulation Platform board
+
+This board is an emulation platform for the Zynq product which is
+based on an ARM Cortex A9 processor.
+
+Required root node properties:
+    - compatible = "xlnx,zynq-ep107";
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
new file mode 100644
index 00000000000..d1e3f443e20
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -0,0 +1,17 @@
+* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-sdma"
+- reg : Should contain SDMA registers location and length
+- interrupts : Should contain SDMA interrupt
+- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
+  scripts firmware
+
+Examples:
+
+sdma@83fb0000 {
+	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+	reg = <0x83fb0000 0x4000>;
+	interrupts = <6>;
+	fsl,sdma-ram-script-name = "sdma-imx51.bin";
+};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
new file mode 100644
index 00000000000..ab22fe6e73a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -0,0 +1,34 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+The Enhanced Secure Digital Host Controller on Freescale i.MX family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible : Should be "fsl,<chip>-esdhc"
+- reg : Should contain eSDHC registers location and length
+- interrupts : Should contain eSDHC interrupt
+
+Optional properties:
+- fsl,card-wired : Indicate the card is wired to host permanently
+- fsl,cd-internal : Indicate to use controller internal card detection
+- fsl,wp-internal : Indicate to use controller internal write protection
+- cd-gpios : Specify GPIOs for card detection
+- wp-gpios : Specify GPIOs for write protection
+
+Examples:
+
+esdhc@70004000 {
+	compatible = "fsl,imx51-esdhc";
+	reg = <0x70004000 0x4000>;
+	interrupts = <1>;
+	fsl,cd-internal;
+	fsl,wp-internal;
+};
+
+esdhc@70008000 {
+	compatible = "fsl,imx51-esdhc";
+	reg = <0x70008000 0x4000>;
+	interrupts = <2>;
+	cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+	wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+};
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
index 1a729f08986..1a729f08986 100755..100644
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
new file mode 100644
index 00000000000..de439517dff
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -0,0 +1,24 @@
+* Freescale Fast Ethernet Controller (FEC)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-fec"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain fec interrupt
+- phy-mode : String, operation mode of the PHY interface.
+  Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+  "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+- phy-reset-gpios : Should specify the gpio for phy reset
+
+Optional properties:
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+fec@83fec000 {
+	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+	reg = <0x83fec000 0x4000>;
+	interrupts = <87>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+	local-mac-address = [00 04 9F 01 1B B9];
+};
diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
new file mode 100644
index 00000000000..a2891ceb634
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
@@ -0,0 +1,5 @@
+OLPC XO-1 RTC
+~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "olpc,xo1-rtc"
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
new file mode 100644
index 00000000000..a9c0406280e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -0,0 +1,19 @@
+* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-uart"
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Optional properties:
+- fsl,uart-has-rtscts : Indicate the uart has rts and cts
+- fsl,irda-mode : Indicate the uart supports irda mode
+
+Example:
+
+uart@73fbc000 {
+	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+	reg = <0x73fbc000 0x4000>;
+	interrupts = <31>;
+	fsl,uart-has-rtscts;
+};
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index b2ff42685bc..bdefe728a73 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -104,4 +104,4 @@ Then in the module init function is would do:
 
 And assuming 'dev' is the struct device passed into the probe hook, the driver
 probe function would do something like:
-	create_device(&mydriver_class, dev, chrdev, &private_data, "my_name");
+	device_create(&mydriver_class, dev, chrdev, &private_data, "my_name");
diff --git a/Documentation/driver-model/overview.txt b/Documentation/driver-model/overview.txt
index 07236ed968d..6a8f9a8075d 100644
--- a/Documentation/driver-model/overview.txt
+++ b/Documentation/driver-model/overview.txt
@@ -30,7 +30,7 @@ management, and hot plug. In particular, the model dictated by Intel and
 Microsoft (namely ACPI) ensures that almost every device on almost any bus
 on an x86-compatible system can work within this paradigm.  Of course,
 not every bus is able to support all such operations, although most
-buses support a most of those operations.
+buses support most of those operations.
 
 
 Downstream Access
@@ -46,25 +46,29 @@ struct pci_dev now looks like this:
 struct pci_dev {
 	...
 
-	struct device dev;
+	struct device dev;     /* Generic device interface */
+	...