Merge branch 'for-linus/i2c-3.2' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c-3.2' of git://git.fluff.org/bjdooks/linux: (47 commits)
  i2c-s3c2410: Add device tree support
  i2c-s3c2410: Keep a copy of platform data and use it
  i2c-nomadik: cosmetic coding style corrections
  i2c-au1550: dev_pm_ops conversion
  i2c-au1550: increase timeout waiting for master done
  i2c-au1550: remove unused ack_timeout
  i2c-au1550: remove usage of volatile keyword
  i2c-tegra: __iomem annotation fix
  i2c-eg20t: Add initialize processing in case i2c-error occurs
  i2c-eg20t: Fix flag setting issue
  i2c-eg20t: add stop sequence in case wait-event timeout occurs
  i2c-eg20t: Separate error processing
  i2c-eg20t: Fix 10bit access issue
  i2c-eg20t: Modify returned value s32 to long
  i2c-eg20t: Fix bus-idle waiting issue
  i2c-designware: Fix PCI core warning on suspend/resume
  i2c-designware: Add runtime power management support
  i2c-designware: Add support for Designware core behind PCI devices.
  i2c-designware: Push all register reads/writes into the core code.
  i2c-designware: Support multiple cores using same ISR
  ...

2 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 00000000000..f3cf43b66f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+  The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x83fc4000 0x4000>;
+	interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x70038000 0x4000>;
+	interrupts = <64>;
+	clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
new file mode 100644
index 00000000000..38832c71291
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
@@ -0,0 +1,39 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller.
+
+Optional properties:
+  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+    specified, default value is 0.
+  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+    specified, the default value in Hz is 100000.
+
+Example:
+
+	i2c@13870000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <345>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpd1 2 0 /* SDA */
+			 &gpd1 3 0 /* SCL */>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wm8994@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+		};
+	};