Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (68 commits)
  Input: adp5589-keys - add support for the ADP5585 derivatives
  Input: imx_keypad - add pm suspend and resume support
  Input: force feedback - potential integer wrap in input_ff_create()
  Input: tsc2007 - make sure that X plate resistance is specified
  Input: serio_raw - fix memory leak when closing char device
  Input: serio_raw - kick clients when disconnecting port
  Input: serio_raw - explicitly mark disconnected ports as dead
  Input: serio_raw - fix coding style issues
  Input: serio_raw - use dev_*() for messages
  Input: serio_raw - use bool for boolean data
  Input: serio_raw - perform proper locking when adding clients to list
  Input: serio_raw - rename serio_raw_list to serio_raw_client
  Input: serio_raw - use kref instead of rolling out its own refcounting
  Input: psmouse - switch to using dev_*() for messages
  Input: wacom - correct max Y value on medium bamboos
  Input: wacom - add ABS_DISTANCE to Bamboo Pen reports
  Input: wacom - remove unneeded touch pressure initialization
  Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP
  Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEP
  Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEP
  ...

4 files changed, 365 insertions, 26 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 00000000000..82d4df13644
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,72 @@
+What:		/sys/class/hidraw/hidraw*/device/speed
+Date:		April 2010
+Kernel Version:	2.6.35
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/speed file controls
+		reporting speed of Wacom bluetooth tablet. Reading from
+		this file returns 1 if tablet reports in high speed mode
+		or 0 otherwise. Writing to this file one of these values
+		switches reporting speed.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Attribute group for control of the status LEDs and the OLEDs.
+		This attribute group is only available for Intuos 4 M, L,
+		and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
+		Therefore its presence implicitly signifies the presence of
+		said LEDs and OLEDs on the tablet device.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus does not touch the tablet surface, and no
+		button is pressed on the stylus. This luminance level is
+		normally lower than the level when a button is pressed.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus touches the tablet surface, or any button is
+		pressed on the stylus.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the four (for Intuos 4)
+		or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
+		The other three LEDs on the same side are always inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
+Date:		September 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the left four (for Cintiq 21UX2)
+		status LEDs is active (0..3). The other three LEDs on the left are always
+		inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the overall luminance level (0..15)
+		of all eight button OLED displays.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		When writing a 1024 byte raw image in Wacom Intuos 4
+		interleaving format to the file, the image shows up on Button N
+		of the device. The image is a 64x32 pixel 4-bit gray image. The
+		1024 byte binary is split up into 16x 64 byte chunks. Each 64
+		byte chunk encodes the image data for two consecutive lines on
+		the display. The low nibble of each byte contains the first
+		line, and the high nibble contains the second line.
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
deleted file mode 100644
index 1517976e25c..00000000000
--- a/Documentation/ABI/testing/sysfs-wacom
+++ /dev/null
@@ -1,10 +0,0 @@
-What:		/sys/class/hidraw/hidraw*/device/speed
-Date:		April 2010
-Kernel Version:	2.6.35
-Contact:	linux-bluetooth@vger.kernel.org
-Description:
-		The /sys/class/hidraw/hidraw*/device/speed file controls
-		reporting speed of wacom bluetooth tablet. Reading from
-		this file returns 1 if tablet reports in high speed mode
-		or 0 otherwise. Writing to this file one of these values
-		switches reporting speed.
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index db798af5ef9..5602eb71ad5 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -16,15 +16,28 @@ Contents
 
  1. Introduction
  2. Extra knobs
- 3. Hardware version 1
-    3.1 Registers
-    3.2 Native relative mode 4 byte packet format
-    3.3 Native absolute mode 4 byte packet format
- 4. Hardware version 2
+ 3. Differentiating hardware versions
+ 4. Hardware version 1
     4.1 Registers
-    4.2 Native absolute mode 6 byte packet format
-        4.2.1 One finger touch
-        4.2.2 Two finger touch
+    4.2 Native relative mode 4 byte packet format
+    4.3 Native absolute mode 4 byte packet format
+ 5. Hardware version 2
+    5.1 Registers
+    5.2 Native absolute mode 6 byte packet format
+        5.2.1 Parity checking and packet re-synchronization
+        5.2.2 One/Three finger touch
+        5.2.3 Two finger touch
+ 6. Hardware version 3
+    6.1 Registers
+    6.2 Native absolute mode 6 byte packet format
+        6.2.1 One/Three finger touch
+        6.2.2 Two finger touch
+ 7. Hardware version 4
+    7.1 Registers
+    7.2 Native absolute mode 6 byte packet format
+        7.2.1 Status packet
+        7.2.2 Head packet
+        7.2.3 Motion packet
 
 
 
@@ -375,7 +388,7 @@ For all the other ones, there are just a few constant bits:
 
 In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
 
-5.2.1 One/Three finger touch
+5.2.2 One/Three finger touch
       ~~~~~~~~~~~~~~~~
 
 byte 0:
@@ -384,19 +397,19 @@ byte 0:
 	 n1  n0  w3  w2   .   .   R   L
 
          L, R = 1 when Left, Right mouse button pressed
-         n1..n0 = numbers of fingers on touchpad
+         n1..n0 = number of fingers on touchpad
 
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-	 p7  p6  p5  p4  .  x10 x9  x8
+	 p7  p6  p5  p4 x11 x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
 	 x7  x6  x5  x4  x3  x2  x1  x0
 
-         x10..x0 = absolute x value (horizontal)
+         x11..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -420,7 +433,7 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        p3  p1  p2  p0   .   .  y9  y8
+        p3  p1  p2  p0  y11 y10 y9  y8
 
 	 p7..p0 = pressure (not EF113)
 
@@ -429,10 +442,10 @@ byte 5:
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y9..y0 = absolute y value (vertical)
+         y11..y0 = absolute y value (vertical)
 
 
-4.2.2 Two finger touch
+5.2.3 Two finger touch
       ~~~~~~~~~~~~~~~~
 
 Note that the two pairs of coordinates are not exactly the coordinates of the
@@ -446,7 +459,7 @@ byte 0:
         n1  n0  ay8 ax8  .   .   R   L
 
          L, R = 1 when Left, Right mouse button pressed
-         n1..n0 = numbers of fingers on touchpad
+         n1..n0 = number of fingers on touchpad
 
 byte 1:
 
@@ -480,3 +493,253 @@ byte 5:
         by7 by8 by5 by4 by3 by2 by1 by0
 
          by8..by0 = upper-right finger absolute y value
+
+/////////////////////////////////////////////////////////////////////////////
+
+6. Hardware version 3
+   ==================
+
+6.1 Registers
+    ~~~~~~~~~
+* reg_10
+
+   bit   7   6   5   4   3   2   1   0
+         0   0   0   0   0   0   0   A
+
+         A: 1 = enable absolute tracking
+
+6.2 Native absolute mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+1 and 3 finger touch shares the same 6-byte packet format, except that
+3 finger touch only reports the position of the center of all three fingers.
+
+Firmware would send 12 bytes of data for 2 finger touch.
+
+Note on debounce:
+In case the box has unstable power supply or other electricity issues, or
+when number of finger changes, F/W would send "debounce packet" to inform
+driver that the hardware is in debounce status.
+The debouce packet has the following signature:
+    byte 0: 0xc4
+    byte 1: 0xff
+    byte 2: 0xff
+    byte 3: 0x02
+    byte 4: 0xff
+    byte 5: 0xff
+When we encounter this kind of packet, we just ignore it.
+
+6.2.1 One/Three finger touch
+      ~~~~~~~~~~~~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+        n1  n0  w3  w2   0   1   R   L
+
+        L, R = 1 when Left, Right mouse button pressed
+        n1..n0 = number of fingers on touchpad
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+        p7  p6  p5  p4 x11 x10  x9  x8
+
+byte 2:
+
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+
+        x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+         0   0  w1  w0   0   0   1   0
+
+         w3..w0 = width of the finger touch
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+        p3  p1  p2  p0  y11 y10 y9  y8
+
+        p7..p0 = pressure
+
+byte 5:
+
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+        y11..y0 = absolute y value (vertical)
+
+6.2.2 Two finger touch
+      ~~~~~~~~~~~~~~~~
+
+The packet format is exactly the same for two finger touch, except the hardware
+sends two 6 byte packets. The first packet contains data for the first finger,
+the second packet has data for the second finger. So for two finger touch a
+total of 12 bytes are sent.
+
+/////////////////////////////////////////////////////////////////////////////
+
+7. Hardware version 4
+   ==================
+
+7.1 Registers
+    ~~~~~~~~~
+* reg_07
+
+   bit   7   6   5   4   3   2   1   0
+         0   0   0   0   0   0   0   A
+
+         A: 1 = enable absolute tracking
+
+7.2 Native absolute mode 6 byte packet format
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers.
+Unfortunately, due to PS/2's limited bandwidth, its packet format is rather
+complex.
+
+Whenever the numbers or identities of the fingers changes, the hardware sends a
+status packet to indicate how many and which fingers is on touchpad, followed by
+head packets or motion packets. A head packet contains data of finger id, finger
+position (absolute x, y values), width, and pressure. A motion packet contains
+two fingers' position delta.
+
+For example, when status packet tells there are 2 fingers on touchpad, then we
+can expect two following head packets. If the finger status doesn't change,
+the following packets would be motion packets, only sending delta of finger
+position, until we receive a status packet.
+
+One exception is one finger touch. when a status packet tells us there is only
+one finger, the hardware would just send head packets afterwards.
+
+7.2.1 Status packet
+      ~~~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+         .   .   .   .   0   1   R   L
+
+         L, R = 1 when Left, Right mouse button pressed
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+         .   .   . ft4 ft3 ft2 ft1 ft0
+
+         ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad
+
+byte 2: not used
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+         .   .   .   1   0   0   0   0
+
+         constant bits
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+         p   .   .   .   .   .   .   .
+
+         p = 1 for palm
+
+byte 5: not used
+
+7.2.2 Head packet
+      ~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+        w3  w2  w1  w0   0   1   R   L
+
+        L, R = 1 when Left, Right mouse button pressed
+        w3..w0 = finger width (spans how many trace lines)
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+        p7  p6  p5  p4 x11 x10  x9  x8
+
+byte 2:
+
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+
+        x11..x0 = absolute x value (horizontal)
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+       id2 id1 id0   1   0   0   0   1
+
+       id2..id0 = finger id
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+        p3  p1  p2  p0  y11 y10 y9  y8
+
+        p7..p0 = pressure
+
+byte 5:
+
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+        y11..y0 = absolute y value (vertical)
+
+7.2.3 Motion packet
+      ~~~~~~~~~~~~~
+
+byte 0:
+
+   bit   7   6   5   4   3   2   1   0
+       id2 id1 id0   w   0   1   R   L
+
+       L, R = 1 when Left, Right mouse button pressed
+       id2..id0 = finger id
+       w = 1 when delta overflows (> 127 or < -128), in this case
+       firmware sends us (delta x / 5) and (delta y  / 5)
+
+byte 1:
+
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+
+        x7..x0 = delta x (two's complement)
+
+byte 2:
+
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+        y7..y0 = delta y (two's complement)
+
+byte 3:
+
+   bit   7   6   5   4   3   2   1   0
+       id2 id1 id0   1   0   0   1   0
+
+       id2..id0 = finger id
+
+byte 4:
+
+   bit   7   6   5   4   3   2   1   0
+        x7  x6  x5  x4  x3  x2  x1  x0
+
+        x7..x0 = delta x (two's complement)
+
+byte 5:
+
+   bit   7   6   5   4   3   2   1   0
+        y7  y6  y5  y4  y3  y2  y1  y0
+
+        y7..y0 = delta y (two's complement)
+
+        byte 0 ~ 2 for one finger
+        byte 3 ~ 5 for another
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 71536e78406..543101c5bf2 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -65,6 +65,20 @@ the full state of each initiated contact has to reside in the receiving
 end.  Upon receiving an MT event, one simply updates the appropriate
 attribute of the current slot.
 
+Some devices identify and/or track more contacts than they can report to the
+driver.  A driver for such a device should associate one type B slot with each
+contact that is reported by the hardware.  Whenever the identity of the
+contact associated with a slot changes, the driver should invalidate that
+slot by changing its ABS_MT_TRACKING_ID.  If the hardware signals that it is
+tracking more contacts than it is currently reporting, the driver should use
+a BTN_TOOL_*TAP event to inform userspace of the total number of contacts
+being tracked by the hardware at that moment.  The driver should do this by
+explicitly sending the corresponding BTN_TOOL_*TAP event and setting
+use_count to false when calling input_mt_report_pointer_emulation().
+The driver should only advertise as many slots as the hardware can report.
+Userspace can detect that a driver can report more total contacts than slots
+by noting that the largest supported BTN_TOOL_*TAP event is larger than the
+total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis.
 
 Protocol Example A
 ------------------