Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

6 files changed, 78 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 17c1042b2df..a6391e70a8f 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -13,8 +13,9 @@ Required properties:
 Optional properties:
 - atmel,use-dma-rx: use of PDC or DMA for receiving data
 - atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
-  function pin for the USART RTS feature. If unsure, don't specify this property.
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
+  It will use specified PIO instead of the peripheral function pin for the USART feature.
+  If unsure, don't specify this property.
 - add dma bindings for dma transfer:
 	- dmas: DMA specifier, consisting of a phandle to DMA controller node,
 		memory peripheral interface and USART DMA channel ID, FIFO configuration.
@@ -35,7 +36,12 @@ Example:
 		clock-names = "usart";
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
-		rts-gpios = <&pioD 15 0>;
+		rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+		cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+		dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+		dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+		dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+		rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
 	};
 
 - use DMA:
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
new file mode 100644
index 00000000000..246c795668d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,33 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "nxp,sc16is740" for NXP SC16IS740,
+  - "nxp,sc16is741" for NXP SC16IS741,
+  - "nxp,sc16is750" for NXP SC16IS750,
+  - "nxp,sc16is752" for NXP SC16IS752,
+  - "nxp,sc16is760" for NXP SC16IS760,
+  - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+        sc16is750: sc16is750@51 {
+                compatible = "nxp,sc16is750";
+                reg = <0x51>;
+                clocks = <&clk20m>;
+                interrupt-parent = <&gpio3>;
+                interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt
index 1928a3e83cd..77054772a8f 100644
--- a/Documentation/devicetree/bindings/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/serial/of-serial.txt
@@ -37,6 +37,7 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
+- has-hw-flow-control: the hardware has flow control capability.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 53e6c175db6..64fd7dec1bb 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -4,6 +4,7 @@ Required properties:
 
   - compatible: Must contain one of the following:
 
+    - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
     - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
     - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7da289ee058..4ddcbf94969 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -883,6 +883,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			which are not unmapped.
 
 	earlycon=	[KNL] Output early console device and options.
+
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio32,<addr>[,options]
@@ -892,6 +893,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
+		pl011,<addr>
+			Start an early, polled-mode console on a pl011 serial
+			port at the specified address. The pl011 serial port
+			must already be setup and configured. Options are not
+			yet supported.
+
+		smh	Use ARM semihosting calls for early console.
+
 	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k]
 			earlyprintk=vga
 			earlyprintk=efi
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index c3a7689a90e..3bba1aeb799 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -429,3 +429,28 @@ thus:
 		struct uart_port	port;
 		int			my_stuff;
 	};
+
+Modem control lines via GPIO
+----------------------------
+
+Some helpers are provided in order to set/get modem control lines via GPIO.
+
+mctrl_gpio_init(dev, idx):
+	This will get the {cts,rts,...}-gpios from device tree if they are
+	present and request them, set direction etc, and return an
+	allocated structure. devm_* functions are used, so there's no need
+	to call mctrl_gpio_free().
+
+mctrl_gpio_free(dev, gpios):
+	This will free the requested gpios in mctrl_gpio_init().
+	As devm_* function are used, there's generally no need to call
+	this function.
+
+mctrl_gpio_to_gpiod(gpios, gidx)
+	This returns the gpio structure associated to the modem line index.
+
+mctrl_gpio_set(gpios, mctrl):
+	This will sets the gpios according to the mctrl state.
+
+mctrl_gpio_get(gpios, mctrl):
+	This will update mctrl with the gpios values.