Merge branch 'akpm' (incoming from Andrew)

Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...

4 files changed, 19 insertions, 6 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5f500977b42..d773d5697cf 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -48,3 +48,8 @@ max_ratio (read-write)
 	most of the write-back cache.  For example in case of an NFS
 	mount that is prone to get stuck, or a FUSE mount which cannot
 	be trusted to play fair.
+
+stable_pages_required (read-only)
+
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
index 1529394cfe8..18b06ca038e 100644
--- a/Documentation/backlight/lp855x-driver.txt
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -4,7 +4,7 @@ Kernel driver lp855x
 Backlight driver for LP855x ICs
 
 Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
 
 Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 
@@ -24,7 +24,7 @@ Value : pwm based or register based
 
 2) chip_id
 The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8556
+Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
 
 Platform data for lp855x
 ------------------------
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index d4d66757354..b2fb2f5e192 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -1228,7 +1228,7 @@ hierarchy and routing of interrupts in the hardware.
 The interrupt tree model is fully described in the
 document "Open Firmware Recommended Practice: Interrupt
 Mapping Version 0.9".  The document is available at:
-<http://playground.sun.com/1275/practice>.
+<http://www.openfirmware.org/ofwg/practice/>
 
 1) interrupts property
 ----------------------
diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
index 8ffb274367c..e8a6aa473ba 100644
--- a/Documentation/printk-formats.txt
+++ b/Documentation/printk-formats.txt
@@ -53,6 +53,14 @@ Struct Resources:
 	For printing struct resources. The 'R' and 'r' specifiers result in a
 	printed resource with ('R') or without ('r') a decoded flags member.
 
+Physical addresses:
+
+	%pa	0x01234567 or 0x0123456789abcdef
+
+	For printing a phys_addr_t type (and its derivatives, such as
+	resource_size_t) which can vary based on build options, regardless of
+	the width of the CPU data path. Passed by reference.
+
 Raw buffer as a hex string:
 	%*ph	00 01 02  ...  3f
 	%*phC	00:01:02: ... :3f
@@ -150,9 +158,9 @@ s64 SHOULD be printed with %lld/%llx, (long long):
 	printk("%lld", (long long)s64_var);
 
 If <type> is dependent on a config option for its size (e.g., sector_t,
-blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent
-for its size (e.g., tcflag_t), use a format specifier of its largest
-possible type and explicitly cast to it.  Example:
+blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a
+format specifier of its largest possible type and explicitly cast to it.
+Example:
 
 	printk("test: sector number/total blocks: %llu/%llu\n",
 		(unsigned long long)sector, (unsigned long long)blockcount);