Merge branch 'linux-2.6' into for-2.6.22

28 files changed, 1745 insertions, 285 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
new file mode 100644
index 00000000000..f9937add033
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -0,0 +1,41 @@
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, one of "on", "auto", or "suspend".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.  "suspend" means the device
+		is forced into a suspended state and it will not autoresume
+		in response to I/O requests.  However remote-wakeup requests
+		from the device may still be enabled (the remote-wakeup
+		setting is controlled separately by the power/wakeup
+		attribute).
+
+		During normal use, devices should be left in the "auto"
+		level.  The other levels are meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 19b4c96b2a4..5c88ba1ea26 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,18 @@ be removed from this file.
 
 ---------------------------
 
+What:	V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
+When:	October 2007
+Why:	Broken attempt to set MPEG compression parameters. These ioctls are
+	not able to implement the wide variety of parameters that can be set
+	by hardware MPEG encoders. A new MPEG control mechanism was created
+	in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
+	(section 1.9: Extended controls) for more information on this topic.
+Who:	Hans Verkuil <hverkuil@xs4all.nl> and
+	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
 What:	/sys/devices/.../power/state
 	dev->power.power_state
 	dpm_runtime_{suspend,resume)()
@@ -134,15 +146,6 @@ Who:	Arjan van de Ven <arjan@linux.intel.com>
 
 ---------------------------
 
-What:	mount/umount uevents
-When:	February 2007
-Why:	These events are not correct, and do not properly let userspace know
-	when a file system has been mounted or unmounted.  Userspace should
-	poll the /proc/mounts file instead to detect this properly.
-Who:	Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
 What:	USB driver API moves to EXPORT_SYMBOL_GPL
 When:	February 2008
 Files:	include/linux/usb.h, drivers/usb/core/driver.c
@@ -211,15 +214,6 @@ Who:   Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:	IPv4 only connection tracking/NAT/helpers
-When:	2.6.22
-Why:	The new layer 3 independant connection tracking replaces the old
-	IPv4 only version. After some stabilization of the new code the
-	old one will be removed.
-Who:	Patrick McHardy <kaber@trash.net>
-
----------------------------
-
 What:	ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
 When:	December 2006
 Why:	Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
@@ -294,18 +288,6 @@ Who:	Richard Purdie <rpurdie@rpsys.net>
 
 ---------------------------
 
-What:	Wireless extensions over netlink (CONFIG_NET_WIRELESS_RTNETLINK)
-When:	with the merge of wireless-dev, 2.6.22 or later
-Why:	The option/code is
-	 * not enabled on most kernels
-	 * not required by any userspace tools (except an experimental one,
-	   and even there only for some parts, others use ioctl)
-	 * pointless since wext is no longer evolving and the ioctl
-	   interface needs to be kept
-Who:	Johannes Berg <johannes@sipsolutions.net>
-
----------------------------
-
 What:	i8xx_tco watchdog driver
 When:	in 2.6.22
 Why:	the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
@@ -313,3 +295,22 @@ Why:	the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
 Who:	Wim Van Sebroeck <wim@iguana.be>
 
 ---------------------------
+
+What:	Multipath cached routing support in ipv4
+When:	in 2.6.23
+Why:	Code was merged, then submitter immediately disappeared leaving
+	us with no maintainer and lots of bugs.  The code should not have
+	been merged in the first place, and many aspects of it's
+	implementation are blocking more critical core networking
+	development.  It's marked EXPERIMENTAL and no distribution
+	enables it because it cause obscure crashes due to unfixable bugs
+	(interfaces don't return errors so memory allocation can't be
+	handled, calling contexts of these interfaces make handling
+	errors impossible too because they get called after we've
+	totally commited to creating a route object, for example).
+	This problem has existed for years and no forward progress
+	has ever been made, and nobody steps up to try and salvage
+	this code, so we're going to finally just get rid of it.
+Who:	David S. Miller <davem@davemloft.net>
+
+---------------------------
diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt
index 2f4237dfb8c..12ad6c7f4e5 100644
--- a/Documentation/filesystems/afs.txt
+++ b/Documentation/filesystems/afs.txt
@@ -1,31 +1,82 @@
+			     ====================
 			     kAFS: AFS FILESYSTEM
 			     ====================
 
-ABOUT
-=====
+Contents:
+
+ - Overview.
+ - Usage.
+ - Mountpoints.
+ - Proc filesystem.
+ - The cell database.
+ - Security.
+ - Examples.
+
+
+========
+OVERVIEW
+========
 
-This filesystem provides a fairly simple AFS filesystem driver. It is under
-development and only provides very basic facilities. It does not yet support
-the following AFS features:
+This filesystem provides a fairly simple secure AFS filesystem driver. It is
+under development and does not yet provide the full feature set.  The features
+it does support include:
 
-	(*) Write support.
-	(*) Communications security.
-	(*) Local caching.
-	(*) pioctl() system call.
-	(*) Automatic mounting of embedded mountpoints.
+ (*) Security (currently only AFS kaserver and KerberosIV tickets).
 
+ (*) File reading.
 
+ (*) Automounting.
+
+It does not yet support the following AFS features:
+
+ (*) Write support.
+
+ (*) Local caching.
+
+ (*) pioctl() system call.
+
+
+===========
+COMPILATION
+===========
+
+The filesystem should be enabled by turning on the kernel configuration
+options:
+
+	CONFIG_AF_RXRPC		- The RxRPC protocol transport
+	CONFIG_RXKAD		- The RxRPC Kerberos security handler
+	CONFIG_AFS		- The AFS filesystem
+
+Additionally, the following can be turned on to aid debugging:
+
+	CONFIG_AF_RXRPC_DEBUG	- Permit AF_RXRPC debugging to be enabled
+	CONFIG_AFS_DEBUG	- Permit AFS debugging to be enabled
+
+They permit the debugging messages to be turned on dynamically by manipulating
+the masks in the following files:
+
+	/sys/module/af_rxrpc/parameters/debug
+	/sys/module/afs/parameters/debug
+
+
+=====
 USAGE
 =====
 
 When inserting the driver modules the root cell must be specified along with a
 list of volume location server IP addresses:
 
-	insmod rxrpc.o
+	insmod af_rxrpc.o
+	insmod rxkad.o
 	insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
 
-The first module is a driver for the RxRPC remote operation protocol, and the
-second is the actual filesystem driver for the AFS filesystem.
+The first module is the AF_RXRPC network protocol driver.  This provides the
+RxRPC remote operation protocol and may also be accessed from userspace.  See:
+
+	Documentation/networking/rxrpc.txt
+
+The second module is the kerberos RxRPC security driver, and the third module
+is the actual filesystem driver for the AFS filesystem.
 
 Once the module has been loaded, more modules can be added by the following
 procedure:
@@ -33,7 +84,7 @@ procedure:
 	echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
 
 Where the parameters to the "add" command are the name of a cell and a list of
-volume location servers within that cell.
+volume location servers within that cell, with the latter separated by colons.
 
 Filesystems can be mounted anywhere by commands similar to the following:
 
@@ -42,11 +93,6 @@ Filesystems can be mounted anywhere by commands similar to the following:
 	mount -t afs "#root.afs." /afs
 	mount -t afs "#root.cell." /afs/cambridge
 
-  NB: When using this on Linux 2.4, the mount command has to be different,
-      since the filesystem doesn't have access to the device name argument:
-
-	mount -t afs none /afs -ovol="#root.afs."
-
 Where the initial character is either a hash or a percent symbol depending on
 whether you definitely want a R/W volume (hash) or whether you'd prefer a R/O
 volume, but are willing to use a R/W volume instead (percent).
@@ -60,55 +106,66 @@ named volume will be looked up in the cell specified during insmod.
 Additional cells can be added through /proc (see later section).
 
 
+===========
 MOUNTPOINTS
 ===========
 
-AFS has a concept of mountpoints. These are specially formatted symbolic links
-(of the same form as the "device name" passed to mount). kAFS presents these
-to the user as directories that have special properties:
+AFS has a concept of mountpoints. In AFS terms, these are specially formatted
+symbolic links (of the same form as the "device name" passed to mount).  kAFS
+presents these to the user as directories that have a follow-link capability
+(ie: symbolic link semantics).  If anyone attempts to access them, they will
+automatically cause the target volume to be mounted (if possible) on that site.
 
-  (*) They cannot be listed. Running a program like "ls" on them will incur an
-      EREMOTE error (Object is remote).
+Automatically mounted filesystems will be automatically unmounted approximately
+twenty minutes after they were last used.  Alternatively they can be unmounted
+directly with the umount() system call.
 
-  (*) Other objects can't be looked up inside of them. This also incurs an
-      EREMOTE error.
+Manually unmounting an AFS volume will cause any idle submounts upon it to be
+culled first.  If all are culled, then the requested volume will also be
+unmounted, otherwise error EBUSY will be returned.
 
-  (*) They can be queried with the readlink() system call, which will return
-      the name of the mountpoint to which they point. The "readlink" program
-      will also work.
+This can be used by the administrator to attempt to unmount the whole AFS tree
+mounted on /afs in one go by doing:
 
-  (*) They can be mounted on (which symbolic links can't).
+	umount /afs
 
 
+===============
 PROC FILESYSTEM
 ===============
 
-The rxrpc module creates a number of files in various places in the /proc
-filesystem:
-
-  (*) Firstly, some information files are made available in a directory called
-      "/proc/net/rxrpc/". These list the extant transport endpoint, peer,
-      connection and call records.
-
-  (*) Secondly, some control files are made available in a directory called
-      "/proc/sys/rxrpc/". Currently, all these files can be used for is to
-      turn on various levels of tracing.
-
 The AFS modules creates a "/proc/fs/afs/" directory and populates it:
 
-  (*) A "cells" file that lists cells currently known to the afs module.
+  (*) A "cells" file that lists cells currently known to the afs module and
+      their usage counts:
+
+	[root@andromeda ~]# cat /proc/fs/afs/cells
+	USE NAME
+	  3 cambridge.redhat.com
 
   (*) A directory per cell that contains files that list volume location
       servers, volumes, and active servers known within that cell.
 
+	[root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/servers
+	USE ADDR            STATE
+	  4 172.16.18.91        0
+	[root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/vlservers
+	ADDRESS
+	172.16.18.91
+	[root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/volumes
+	USE STT VLID[0]  VLID[1]  VLID[2]  NAME
+	  1 Val 20000000 20000001 20000002 root.afs
 
+
+=================
 THE CELL DATABASE
 =================
 
-The filesystem maintains an internal database of all the cells it knows and
-the IP addresses of the volume location servers for those cells. The cell to
-which the computer belongs is added to the database when insmod is performed
-by the "rootcell=" argument.
+The filesystem maintains an internal database of all the cells it knows and the
+IP addresses of the volume location servers for those cells.  The cell to which
+the system belongs is added to the database when insmod is performed by the
+"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
+the kernel command line.
 
 Further cells can be added by commands similar to the following:
 
@@ -118,20 +175,65 @@ Further cells can be added by commands similar to the following:
 No other cell database operations are available at this time.
 
 
+========
+SECURITY
+========
+
+Secure operations are initiated by acquiring a key using the klog program.  A
+very primitive klog program is available at:
+
+	http://people.redhat.com/~dhowells/rxrpc/klog.c
+
+This should be compiled by:
+
+	make klog LDLIBS="-lcrypto -lcrypt -lkrb4 -lkeyutils"
+
+And then run as:
+
+	./klog
+
+Assuming it's successful, this adds a key of type RxRPC, named for the service
+and cell, eg: "afs@<cellname>".  This can be viewed with the keyctl program or
+by cat'ing /proc/keys:
+
+	[root@andromeda ~]# keyctl show
+	Session Keyring
+	       -3 --alswrv      0     0  keyring: _ses.3268
+		2 --alswrv      0     0   \_ keyring: _uid.0
+	111416553 --als--v      0     0   \_ rxrpc: afs@CAMBRIDGE.REDHAT.COM
+
+Currently the username, realm, password and proposed ticket lifetime are
+compiled in to the program.
+
+It is not required to acquire a key before using AFS facilities, but if one is
+not acquired then all operations will be governed by the anonymous user parts
+of the ACLs.
+
+If a key is acquired, then all AFS operations, including mounts and automounts,
+made by a possessor of that key will be secured with that key.
+
+If a file is opened with a particular key and then the file descriptor is
+passed to a process that doesn't have that key (perhaps over an AF_UNIX
+socket), then the operations on the file will be made with key that was used to
+open the file.
+
+
+========
 EXAMPLES
 ========
 
-Here's what I use to test this. Some of the names and IP addresses are local
-to my internal DNS. My "root.afs" partition has a mount point within it for
+Here's what I use to test this.  Some of the names and IP addresses are local
+to my internal DNS.  My "root.afs" partition has a mount point within it for
 some public volumes volumes.
 
-insmod -S /tmp/rxrpc.o 
-insmod -S /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+insmod /tmp/rxrpc.o
+insmod /tmp/rxkad.o
+insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91
 
 mount -t afs \%root.afs. /afs
 mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
 
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells 
+echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
 mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
 mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
 mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib
@@ -141,15 +243,7 @@ mount -t afs "#grand.central.org:root.service." /afs/grand.central.org/service
 mount -t afs "#grand.central.org:root.software." /afs/grand.central.org/software
 mount -t afs "#grand.central.org:root.user." /afs/grand.central.org/user
 
-umount /afs/grand.central.org/user
-umount /afs/grand.central.org/software
-umount /afs/grand.central.org/service
-umount /afs/grand.central.org/project
-umount /afs/grand.central.org/doc
-umount /afs/grand.central.org/contrib
-umount /afs/grand.central.org/archive
-umount /afs/grand.central.org
-umount /afs/cambridge.redhat.com
 umount /afs
 rmmod kafs
+rmmod rxkad
 rmmod rxrpc
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 5484ab5efd4..7aaf09b86a5 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1421,6 +1421,15 @@ fewer messages that will be written. Message_burst controls when messages will
 be dropped.  The  default  settings  limit  warning messages to one every five
 seconds.
 
+warnings
+--------
+
+This controls console messages from the networking stack that can occur because
+of problems on the network like duplicate address or bad checksums. Normally,
+this should be enabled, but if the problem persists the messages can be
+disabled.
+
+
 netdev_max_backlog
 ------------------
 
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 989f1130f4f..f8528db967f 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -27,7 +27,7 @@ The exact capabilities of GPIOs vary between systems.  Common options:
   - Output values are writable (high=1, low=0).  Some chips also have
     options about how that value is driven, so that for example only one
     value might be driven ... supporting "wire-OR" and similar schemes
-    for the other value.
+    for the other value (notably, "open drain" signaling).
 
   - Input values are likewise readable (1, 0).  Some chips support readback
     of pins configured as "output", which is very useful in such "wire-OR"
@@ -247,6 +247,35 @@ with gpio_get_value(), for example to initialize or update driver state
 when the IRQ is edge-triggered.
 
 
+Emulating Open Drain Signals
+----------------------------
+Sometimes shared signals need to use "open drain" signaling, where only the
+low signal level is actually driven.  (That term applies to CMOS transistors;
+"open collector" is used for TTL.)  A pullup resistor causes the high signal
+level.  This is sometimes called a "wire-AND"; or more practically, from the
+negative logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain outputs; many don't.  When
+you need open drain signaling but your hardware doesn't directly support it,
+there's a common idiom you can use to emulate it with any GPIO pin that can
+be used as either an input or an output:
+
+ LOW:	gpio_direction_output(gpio, 0) ... this drives the signal
+	and overrides the pullup.
+
+ HIGH:	gpio_direction_input(gpio) ... this turns off the output,
+	so the pullup (or some other device) controls the signal.
+
+If you are "driving" the signal high but gpio_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component
+is driving the shared signal low.  That's not necessarily an error.  As one
+common example, that's how I2C clocks are stretched:  a slave that needs a
+slower clock delays the rising edge of SCK, and the I2C master adjusts its
+signaling rate accordingly.
+
 
 What do these conventions omit?
 ===============================
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt
index 750fe5e80eb..8ec54b974b6 100644
--- a/Documentation/infiniband/user_mad.txt
+++ b/Documentation/infiniband/user_mad.txt
@@ -91,6 +91,14 @@ Sending MADs
 	if (ret != sizeof *mad + mad_length)
 		perror("write");
 
+Transaction IDs
+
+  Users of the umad devices can use the lower 32 bits of the
+  transaction ID field (that is, the least significant half of the
+  field in network byte order) in MADs being sent to match
+  request/response pairs.  The upper 32 bits are reserved for use by
+  the kernel and will be overwritten before a MAD is sent.
+
 Setting IsSM Capability Bit
 
   To set the IsSM capability bit for a port, simply open the
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 12533a958c5..2017942e096 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1792,7 +1792,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			for newly-detected USB devices (default 2).  This
 			is the time required before an idle device will be
 			autosuspended.  Devices for which the delay is set
-			to 0 won't be autosuspended at all.
+			to a negative value won't be autosuspended at all.
 
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index 60c665d9cfa..81d9aa09729 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -859,6 +859,18 @@ payload contents" for more information.
 	void unregister_key_type(struct key_type *type);
 
 
+Under some circumstances, it may be desirable to desirable to deal with a
+bundle of keys.  The facility provides access to the keyring type for managing
+such a bundle:
+
+	struct key_type key_type_keyring;
+
+This can be used with a function such as request_key() to find a specific
+keyring in a process's keyrings.  A keyring thus found can then be searched
+with keyring_search().  Note that it is not possible to use request_key() to
+search a specific keyring, so using keyrings in this way is of limited utility.
+
+
 ===================================
 NOTES ON ACCESSING PAYLOAD CONTENTS
 ===================================
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index de809e58092..1da56663083 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -920,40 +920,9 @@ options, you may wish to use the "max_bonds" module parameter,
 documented above.
 
 	To create multiple bonding devices with differing options, it
-is necessary to load the bonding driver multiple times.  Note that
-current versions of the sysconfig network initialization scripts
-handle this automatically; if your distro uses these scripts, no
-special action is needed.  See the section Configuring Bonding
-Devices, above, if you're not sure about your network initialization
-scripts.
-
-	To load multiple instances of the module, it is necessary to
-specify a different name for each instance (the module loading system
-requires that every loaded module, even multiple instances of the same
-module, have a unique name).  This is accomplished by supplying
-multiple sets of bonding options in /etc/modprobe.conf, for example:
-	
-alias bond0 bonding
-options bond0 -o bond0 mode=balance-rr miimon=100
-
-alias bond1 bonding
-options bond1 -o bond1 mode=balance-alb miimon=50
-
-	will load the bonding module two times.  The first instance is
-named "bond0" and creates the bond0 device in balance-rr mode with an
-miimon of 100.  The second instance is named "bond1" and creates the
-bond1 device in balance-alb mode with an miimon of 50.
-
-	In some circumstances (typically with older distributions),
-the above does not work, and the second bonding instance never sees
-its options.  In that case, the second options line can be substituted
-as follows:
-
-install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
-	mode=balance-alb miimon=50
+is necessary to use bonding parameters exported by sysfs, documented
+in the section below.
 
-	This may be repeated any number of times, specifying a new and
-unique name in place of bond1 for each subsequent instance.
 
 3.4 Configuring Bonding Manually via Sysfs
 ------------------------------------------
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 387482e46c4..4504cc59e40 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -57,6 +57,16 @@ DCCP_SOCKOPT_SEND_CSCOV is for the receiver and has a different meaning: it
 	coverage value are also acceptable. The higher the number, the more
 	restrictive this setting (see [RFC 4340, sec. 9.2.1]).
 
+The following two options apply to CCID 3 exclusively and are getsockopt()-only.
+In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
+DCCP_SOCKOPT_CCID_RX_INFO
+	Returns a `struct tfrc_rx_info' in optval; the buffer for optval and
+	optlen must be set to at least sizeof(struct tfrc_rx_info).
+DCCP_SOCKOPT_CCID_TX_INFO
+	Returns a `struct tfrc_tx_info' in optval; the buffer for optval and
+	optlen must be set to at least sizeof(struct tfrc_tx_info).
+
+
 Sysctl variables
 ================
 Several DCCP default parameters can be managed by the following sysctls
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index d3aae1f9b4c..af6a63ab902 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -179,11 +179,31 @@ tcp_fin_timeout - INTEGER
 	because they eat maximum 1.5K of memory, but they tend
 	to live longer.	Cf. tcp_max_orphans.
 
-tcp_frto - BOOLEAN
+tcp_frto - INTEGER
 	Enables F-RTO, an enhanced recovery algorithm for TCP retransmission
 	timeouts.  It is particularly beneficial in wireless environments
 	where packet loss is typically due to random radio interference
-	rather than intermediate router congestion.
+	rather than intermediate router congestion. If set to 1, basic
+	version is enabled. 2 enables SACK enhanced F-RTO, which is
+	EXPERIMENTAL. The basic version can be used also when SACK is
+	enabled for a flow through tcp_sack sysctl.
+
+tcp_frto_response - INTEGER
+	When F-RTO has detected that a TCP retransmission timeout was
+	spurious (i.e, the timeout would have been avoided had TCP set a
+	longer retransmission timeout), TCP has several options what to do
+	next. Possible values are:
+		0 Rate halving based; a smooth and conservative response,
+		  results in halved cwnd and ssthresh after one RTT
+		1 Very conservative response; not recommended because even
+		  though being valid, it interacts poorly with the rest of
+		  Linux TCP, halves cwnd and ssthresh immediately
+		2 Aggressive response; undoes congestion control measures
+		  that are now known to be unnecessary (ignoring the
+		  possibility of a lost retransmission that would require
+		  TCP to be more cautious), cwnd and ssthresh are restored
+		  to the values prior timeout
+	Default: 0 (rate halving based)
 
 tcp_keepalive_time - INTEGER
 	How often TCP sends out keepalive messages when keepalive is enabled.
@@ -851,6 +871,15 @@ accept_redirects - BOOLEAN
 	Functional default: enabled if local forwarding is disabled.
 			    disabled if local forwarding is enabled.
 
+accept_source_route - INTEGER
+	Accept source routing (routing extension header).
+
+	> 0: Accept routing header.
+	= 0: Accept only routing header type 2.
+	< 0: Do not accept routing header.
+
+	Default: 0
+
 autoconf - BOOLEAN
 	Autoconfigure addresses using Prefix Information in Router 
 	Advertisements.
@@ -986,7 +1015,12 @@ bridge-nf-call-ip6tables - BOOLEAN
 	Default: 1
 
 bridge-nf-filter-vlan-tagged - BOOLEAN
-	1 : pass bridged vlan-tagged ARP/IP traffic to arptables/iptables.
+	1 : pass bridged vlan-tagged ARP/IP/IPv6 traffic to {arp,ip,ip6}tables.
+	0 : disable this.
+	Default: 1
+
+bridge-nf-filter-pppoe-tagged - BOOLEAN
+	1 : pass bridged pppoe-tagged IP/IPv6 traffic to {ip,ip6}tables.
 	0 : disable this.
 	Default: 1
 
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
new file mode 100644
index 00000000000..cae231b1c13
--- /dev/null
+++ b/Documentation/networking/rxrpc.txt
@@ -0,0 +1,859 @@
+			    ======================
+			    RxRPC NETWORK PROTOCOL
+			    ======================
+
+The RxRPC protocol driver provides a reliable two-phase transport on top of UDP
+that can be used to perform RxRPC remote operations.  This is done over sockets
+of AF_RXRPC family, using sendmsg() and recvmsg() with control data to send and
+receive data, aborts and errors.
+