Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

75 files changed, 4325 insertions, 1086 deletions

diff --git a/Documentation/ABI/obsolete/dv1394 b/Documentation/ABI/obsolete/dv1394
new file mode 100644
index 00000000000..2ee36864ca1
--- /dev/null
+++ b/Documentation/ABI/obsolete/dv1394
@@ -0,0 +1,9 @@
+What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	New application development should use raw1394 + userspace libraries
+	instead, notably libiec61883 which is functionally equivalent.
+
+Users:
+	ffmpeg/libavformat (used by a variety of media players)
+	dvgrab v1.x (replaced by dvgrab2 on top of raw1394 and resp. libraries)
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
new file mode 100644
index 00000000000..f9937add033
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -0,0 +1,41 @@
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, one of "on", "auto", or "suspend".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.  "suspend" means the device
+		is forced into a suspended state and it will not autoresume
+		in response to I/O requests.  However remote-wakeup requests
+		from the device may still be enabled (the remote-wakeup
+		setting is controlled separately by the power/wakeup
+		attribute).
+
+		During normal use, devices should be left in the "auto"
+		level.  The other levels are meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 0bb90237e23..b61dfc79e1b 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -236,6 +236,12 @@ X!Ilib/string.c
 !Enet/core/dev.c
 !Enet/ethernet/eth.c
 !Iinclude/linux/etherdevice.h
+!Edrivers/net/phy/phy.c
+!Idrivers/net/phy/phy.c
+!Edrivers/net/phy/phy_device.c
+!Idrivers/net/phy/phy_device.c
+!Edrivers/net/phy/mdio_bus.c
+!Idrivers/net/phy/mdio_bus.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Enet/core/wireless.c
 -->
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index bfbb2718a27..bd23dc0bc0c 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -76,3 +76,7 @@ kernel patches.
 22: Newly-added code has been compiled with `gcc -W'.  This will generate
     lots of noise, but is good for finding bugs like "warning: comparison
     between signed and unsigned".
+
+23: Tested after it has been merged into the -mm patchset to make sure
+    that it still works with all of the other queued patches and various
+    changes in the VM, VFS, and other subsystems.
diff --git a/Documentation/acpi-hotkey.txt b/Documentation/acpi-hotkey.txt
deleted file mode 100644
index 38040fa3764..00000000000
--- a/Documentation/acpi-hotkey.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-driver/acpi/hotkey.c implement:
-1. /proc/acpi/hotkey/event_config 
-(event based hotkey or event config interface):
-a. add a  event based hotkey(event) : 
-echo "0:bus::action:method:num:num" > event_config
-
-b. delete a event based hotkey(event): 
-echo "1:::::num:num" > event_config
-
-c.  modify a event based hotkey(event):    
-echo "2:bus::action:method:num:num" > event_config
-
-2. /proc/acpi/hotkey/poll_config 
-(polling based hotkey or event config interface):
-a.add a polling based hotkey(event) : 	
-echo "0:bus:method:action:method:num" > poll_config
-this adding command will create a proc file 
-/proc/acpi/hotkey/method, which is used to get 
-result of polling.
-
-b.delete a polling based hotkey(event): 	
-echo "1:::::num" > event_config
-
-c.modify a polling based hotkey(event):    
-echo "2:bus:method:action:method:num" > poll_config
-
-3./proc/acpi/hotkey/action 
-(interface to call aml method associated with a 
-specific hotkey(event))
-echo "event_num:event_type:event_argument" > 
-	/proc/acpi/hotkey/action.
-The result of the execution of this aml method is 
-attached to /proc/acpi/hotkey/poll_method, which is dynamically
-created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
-to retrieve it.
-
-Note: Use cmdline "acpi_generic_hotkey" to over-ride
-platform-specific with generic driver.
diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt
new file mode 100644
index 00000000000..37f4edcc5d8
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/DMA.txt
@@ -0,0 +1,46 @@
+			S3C2410 DMA
+			===========
+
+Introduction
+------------
+
+   The kernel provides an interface to manage DMA transfers
+   using the DMA channels in the cpu, so that the central
+   duty of managing channel mappings, and programming the
+   channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+   Many of the range do not have connections for the DMA
+   channels to all sources, which means that some devices
+   have a restricted number of channels that can be used.
+
+   To allow flexibilty for each cpu type and board, the
+   dma code can be given an dma ordering structure which
+   allows the order of channel search to be specified, as
+   well as allowing the prohibition of certain claims.
+
+   struct s3c24xx_dma_order has a list of channels, and
+   each channel within has a slot for a list of dma
+   channel numbers. The slots are searched in order, for
+   the presence of a dma channel number with DMA_CH_VALID
+   orred in.
+
+   If the order has the flag DMA_CH_NEVER set, then after
+   checking the channel list, the system will return no
+   found channel, thus denying the request.
+
+   A board support file can call s3c24xx_dma_order_set()
+   to register an complete ordering set. The routine will
+   copy the data, so the original can be discared with
+   __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 28d014714ab..c31b76fa66c 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,13 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
 
   Support for the S3C2400 series is in progress.
 
-  Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
 Configuration
 -------------
 
@@ -26,6 +23,22 @@ Configuration
   please check the machine specific documentation.
 
 
+Layout
+------
+
+  The core support files are located in the platform code contained in
+  arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+  This directory should be kept to items shared between the platform
+  code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+  Each cpu has a directory with the support files for it, and the
+  machines that carry the device. For example S3C2410 is contained
+  in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+  Register, kernel and platform data definitions are held in the
+  include/asm-arm/arch-s3c2410 directory.
+
+
 Machines
 --------
 
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index e12bc3284a2..0dab6e32c13 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -5,10 +5,10 @@
 Introduction
 ------------
 
-  The S3C2410 supports a low-power suspend mode, where the SDRAM is kept
+  The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
   in Self-Refresh mode, and all but the essential peripheral blocks are
   powered down. For more information on how this works, please look
-  at the S3C2410 datasheets from Samsung.
+  at the relevant CPU datasheet from Samsung.
 
 
 Requirements
@@ -56,6 +56,27 @@ Machine Support
   Note, the original method of adding an late_initcall() is wrong,
   and will end up initialising all compiled machines' pm init!
 
+  The following is an example of code used for testing wakeup from
+  an falling edge on IRQ_EINT0:
+
+
+static irqreturn_t button_irq(int irq, void *pw)
+{
+	return IRQ_HANDLED;
+}
+
+statuc void __init machine_init(void)
+{
+	...
+
+	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
+		   "button-irq-eint0", NULL);
+
+	enable_irq_wake(IRQ_EINT0);
+
+	s3c2410_pm_init();
+}
+
 
 Debugging
 ---------
@@ -70,6 +91,12 @@ Debugging
      care should be taken that any external clock sources that the UARTs
      rely on are still enabled at that point.
 
+  3) If any debugging is placed in the resume path, then it must have the
+     relevant clocks and peripherals setup before use (ie, bootloader).
+
+     For example, if you transmit a character from the UART, the baud
+     rate and uart controls must be setup beforehand.
+
 
 Configuration
 -------------
@@ -89,6 +116,10 @@ Configuration
     Allows the entire memory to be checksummed before and after the
     suspend to see if there has been any corruption of the contents.
 
+    Note, the time to calculate the CRC is dependant on the CPU speed
+    and the size of memory. For an 64Mbyte RAM area on an 200MHz
+    S3C2410, this can take approximately 4 seconds to complete.
+
     This support requires the CRC32 function to be enabled.
 
 
diff --git a/Documentation/cpu-load.txt b/Documentation/cpu-load.txt
new file mode 100644
index 00000000000..287224e57cf
--- /dev/null
+++ b/Documentation/cpu-load.txt
@@ -0,0 +1,113 @@
+CPU load
+--------
+
+Linux exports various bits of information via `/proc/stat' and
+`/proc/uptime' that userland tools, such as top(1), use to calculate
+the average time system spent in a particular state, for example:
+
+    $ iostat
+    Linux 2.6.18.3-exp (linmac)     02/20/2007
+
+    avg-cpu:  %user   %nice %system %iowait  %steal   %idle
+              10.01    0.00    2.92    5.44    0.00   81.63
+
+    ...
+
+Here the system thinks that over the default sampling period the
+system spent 10.01% of the time doing work in user space, 2.92% in the
+kernel, and was overall 81.63% of the time idle.
+
+In most cases the `/proc/stat' information reflects the reality quite
+closely, however due to the nature of how/when the kernel collects
+this data sometimes it can not be trusted at all.
+
+So how is this information collected?  Whenever timer interrupt is
+signalled the kernel looks what kind of task was running at this
+moment and increments the counter that corresponds to this tasks
+kind/state.  The problem with this is that the system could have
+switched between various states multiple times between two timer
+interrupts yet the counter is incremented only for the last state.
+
+
+Example
+-------
+
+If we imagine the system with one task that periodically burns cycles
+in the following manner:
+
+ time line between two timer interrupts
+|--------------------------------------|
+ ^                                    ^
+ |_ something begins working          |
+                                      |_ something goes to sleep
+                                     (only to be awaken quite soon)
+
+In the above situation the system will be 0% loaded according to the
+`/proc/stat' (since the timer interrupt will always happen when the
+system is executing the idle handler), but in reality the load is
+closer to 99%.
+
+One can imagine many more situations where this behavior of the kernel
+will lead to quite erratic information inside `/proc/stat'.
+
+
+/* gcc -o hog smallhog.c */
+#include <time.h>
+#include <limits.h>
+#include <signal.h>
+#include <sys/time.h>
+#define HIST 10
+
+static volatile sig_atomic_t stop;
+
+static void sighandler (int signr)
+{
+     (void) signr;
+     stop = 1;
+}
+static unsigned long hog (unsigned long niters)
+{
+     stop = 0;
+     while (!stop && --niters);
+     return niters;
+}
+int main (void)
+{
+     int i;
+     struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
+                             .it_value = { .tv_sec = 0, .tv_usec = 1 } };
+     sigset_t set;
+     unsigned long v[HIST];
+     double tmp = 0.0;
+     unsigned long n;
+     signal (SIGALRM, &sighandler);
+     setitimer (ITIMER_REAL, &it, NULL);
+
+     hog (ULONG_MAX);
+     for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
+     for (i = 0; i < HIST; ++i) tmp += v[i];
+     tmp /= HIST;
+     n = tmp - (tmp / 3.0);
+
+     sigemptyset (&set);
+     sigaddset (&set, SIGALRM);
+
+     for (;;) {
+         hog (n);
+         sigwait (&set, &i);
+     }
+     return 0;
+}
+
+
+References
+----------
+
+http://lkml.org/lkml/2007/2/12/6
+Documentation/filesystems/proc.txt (1.8)
+
+
+Thanks
+------
+
+Con Kolivas, Pavel Machek
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 842f0d1ab21..f2c0a684293 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -557,6 +557,9 @@ Set some flags:
 Add some cpus:
 # /bin/echo 0-7 > cpus
 
+Add some mems:
+# /bin/echo 0-7 > mems
+
 Now attach your shell to this cpuset:
 # /bin/echo $$ > tasks
 
diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.txt
index e41a79aa71c..9b84b805ab7 100644
--- a/Documentation/crypto/api-intro.txt
+++ b/Documentation/crypto/api-intro.txt
@@ -60,7 +60,7 @@ Here's an example of how to use the API:
 	desc.tfm = tfm;
 	desc.flags = 0;
 	
-	if (crypto_hash_digest(&desc, &sg, 2, result))