Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux

Pull clk framework changes from Mike Turquette:
 "The first half of the clk framework pull request is made up almost
  entirely of new platform/driver support.  There are some conversions
  of existing drivers to the common-clock Device Tree binding, and a few
  non-critical fixes to the framework.

  Due to an entirely unnecessary cyclical dependency with the arm-soc
  tree this pull request is broken into two pieces.  The second piece
  will be sent out after arm-soc sends you the pull request that merged
  in core support for the HiSilicon 3620 platform.  That same pull
  request from arm-soc depends on this pull request to merge in those
  HiSilicon bits without causing build failures"

[ Just did the ARM SoC merges, so getting ready for the second clk tree
  pull request   - Linus ]

* tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits)
  devicetree: bindings: Document qcom,mmcc
  devicetree: bindings: Document qcom,gcc
  clk: qcom: Add support for MSM8660's global clock controller (GCC)
  clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8974's global clock controller (GCC)
  clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8960's global clock controller (GCC)
  clk: qcom: Add reset controller support
  clk: qcom: Add support for branches/gate clocks
  clk: qcom: Add support for root clock generators (RCGs)
  clk: qcom: Add support for phase locked loops (PLLs)
  clk: qcom: Add a regmap type clock struct
  clk: Add set_rate_and_parent() op
  reset: Silence warning in reset-controller.h
  clk: sirf: re-arch to make the codes support both prima2 and atlas6
  clk: composite: pass mux_hw into determine_rate
  clk: shmobile: Fix MSTP clock array initialization
  clk: shmobile: Fix MSTP clock index
  ARM: dts: Add clock provider specific properties to max77686 node
  clk: max77686: Register OF clock provider
  ...

15 files changed, 303 insertions, 12 deletions

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c44044..699ef2a323b 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,11 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
+		unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
+						   unsigned long parent_accuracy);
 		void		(*init)(struct clk_hw *hw);
 	};
 
@@ -202,6 +207,8 @@ optional or must be evaluated on a case-by-case basis.
 .set_parent     |      |             | n             | y           | n    |
 .get_parent     |      |             | n             | y           | n    |
                 |      |             |               |             |      |
+.recalc_accuracy|      |             |               |             |      |
+                |      |             |               |             |      |
 .init           |      |             |               |             |      |
                 -----------------------------------------------------------
 [1] either one of round_rate or determine_rate is required.
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index 75e2e1999f8..180e8835569 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -8,12 +8,29 @@ Required Properties:
 
 - compatible: should be one of the following:
   - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
-  - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
-
+  - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
+    SoCs.
+  - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
+    SoCs.
 - reg: physical base address and length of the controller's register set.
 
 - #clock-cells: should be 1.
 
+- clocks:
+  - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
+    is used if not specified.
+  - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
+    is used if not specified.
+  - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+    specified.
+  - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
+    not specified.
+  - sclk_pcm_in: PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not
+    specified.
+
+- clock-names: Aliases for the above clocks. They should be "pll_ref",
+  "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
+
 The following is the list of clocks generated by the controller. Each clock is
 assigned an identifier and client nodes use this identifier to specify the
 clock which they consume. Some of the clocks are available only on a particular
@@ -34,16 +51,30 @@ i2s_bus         6
 sclk_i2s        7
 pcm_bus         8
 sclk_pcm        9
+adma            10      Exynos5420
+
+Example 1: An example of a clock controller node using the default input
+	   clock names is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+	compatible = "samsung,exynos5250-audss-clock";
+	reg = <0x03810000 0x0C>;
+	#clock-cells = <1>;
+};
 
-Example 1: An example of a clock controller node is listed below.
+Example 2: An example of a clock controller node with the input clocks
+           specified.
 
 clock_audss: audss-clock-controller@3810000 {
 	compatible = "samsung,exynos5250-audss-clock";
 	reg = <0x03810000 0x0C>;
 	#clock-cells = <1>;
+	clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
+		<&ext_i2s_clk>;
+	clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
 };
 
-Example 2: I2S controller node that consumes the clock generated by the clock
+Example 3: I2S controller node that consumes the clock generated by the clock
            controller. Refer to the standard clock bindings for information
            about 'clocks' and 'clock-names' property.
 
diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
new file mode 100644
index 00000000000..60bbb1a8c69
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt
@@ -0,0 +1,98 @@
+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+	compatible = "renesas,emev2-smu-clkdiv";
+	reg = <0x610 0>;
+	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+	#clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+	compatible = "renesas,emev2-smu-gclk";
+	reg = <0x4a0 1>;
+	clocks = <&usia_u0_sclkdiv>;
+	#clock-cells = <0>;
+};
+
+Example of consumer:
+
+uart@e1020000 {
+	compatible = "renesas,em-uart";
+	reg = <0xe1020000 0x38>;
+	interrupts = <0 8 0>;
+	clocks = <&usia_u0_sclk>;
+	clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu@e0110000 {
+	compatible = "renesas,emev2-smu";
+	reg = <0xe0110000 0x10000>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	c32ki: c32ki {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+	pll3_fo: pll3_fo {
+		compatible = "fixed-factor-clock";
+		clocks = <&c32ki>;
+		clock-div = <1>;
+		clock-mult = <7000>;
+		#clock-cells = <0>;
+	};
+	usia_u0_sclkdiv: usia_u0_sclkdiv {
+		compatible = "renesas,emev2-smu-clkdiv";
+		reg = <0x610 0>;
+		clocks = <&pll3_fo>;
+		#clock-cells = <0>;
+	};
+	usia_u0_sclk: usia_u0_sclk {
+		compatible = "renesas,emev2-smu-gclk";
+		reg = <0x4a0 1>;
+		clocks = <&usia_u0_sclkdiv>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 0f2f920e873..72ce617dea8 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -62,6 +62,7 @@ clock which they consume.
   div_i2s1		157
   div_i2s2		158
   sclk_hdmiphy		159
+  div_pcm0		160
 
 
    [Peripheral Clock Gates]
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
index 0b1fe782409..48ea0ad8ad4 100644
--- a/Documentation/devicetree/bindings/clock/fixed-clock.txt
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
@@ -10,6 +10,8 @@ Required properties:
 - clock-frequency : frequency of clock in Hz. Should be a single cell.
 
 Optional properties:
+- clock-accuracy : accuracy of clock in ppb (parts per billion).
+		   Should be a single cell.
 - gpios : From common gpio binding; gpio connection to clock enable pin.
 - clock-output-names : From common clock binding.
 
@@ -18,4 +20,5 @@ Example:
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000000>;
+		clock-accuracy = <100>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
index 5757f9abfc2..1bae8527eb9 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
@@ -19,6 +19,6 @@ Example:
 		compatible = "fixed-factor-clock";
 		clocks = <&parentclk>;
 		#clock-cells = <0>;
-		div = <2>;
-		mult = <1>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
new file mode 100644
index 00000000000..4b71ab41be5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
@@ -0,0 +1,19 @@
+* Hisilicon Hi3620 Clock Controller
+
+The Hi3620 clock controller generates and supplies clock to various
+controllers within the Hi3620 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
index 12bd72605a3..225990f79b7 100644
--- a/Documentation/devicetree/bindings/clock/keystone-pll.txt
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -17,13 +17,14 @@ Required properties:
 - reg - pll control0 and pll multipler registers
 - reg-names : control and multiplier. The multiplier is applicable only for
 		main pll clock
-- fixed-postdiv : fixed post divider value
+- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
+		for postdiv
 
 Example:
 	mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclksys>;
 		reg = <0x02620350 4>, <0x02310110 4>;
 		reg-names = "control", "multiplier";
 		fixed-postdiv = <2>;
@@ -32,11 +33,10 @@ Example:
 	papllclk: papllclk@2620358 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkpass>;
 		clock-output-names = "pa-pll-clk";
 		reg = <0x02620358 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644
index 00000000000..96ce71bbd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -0,0 +1,38 @@
+Binding for Maxim MAX77686 32k clock generator block
+
+This is a part of device tree bindings of MAX77686 multi-function device.
+More information can be found in bindings/mfd/max77686.txt file.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: simple one-cell clock specifier format is used, where the
+  only cell is used as an index of the clock inside the provider. Following
+  indices are allowed:
+    - 0: 32khz_ap clock,
+    - 1: 32khz_cp clock,
+    - 2: 32khz_pmic clock.
+
+Example: Node of the MFD chip
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 0>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		/* ... */
+	};
+
+Example: Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "my-clock";
+		clocks = <&max77686 2>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
new file mode 100644
index 00000000000..767401f4287
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -0,0 +1,21 @@
+Qualcomm Global Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,gcc-msm8660"
+			"qcom,gcc-msm8960"
+			"qcom,gcc-msm8974"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+	clock-controller@900000 {
+		compatible = "qcom,gcc-msm8960";
+		reg = <0x900000 0x4000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
new file mode 100644
index 00000000000..d572e9964c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt
@@ -0,0 +1,21 @@
+Qualcomm Multimedia Clock & Reset Controller Binding
+----------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,mmcc-msm8660"
+			"qcom,mmcc-msm8960"
+			"qcom,mmcc-msm8974"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+	clock-controller@4000000 {
+		compatible = "qcom,mmcc-msm8960";
+		reg = <0x4000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
new file mode 100644
index 00000000000..c09f21e1d98
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -0,0 +1,39 @@
+Binding for Silicon Labs 570, 571, 598 and 599 programmable
+I2C clock generators.
+
+Reference
+This binding uses the common clock binding[1]. Details about the devices can be
+found in the data sheets[2][3].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si570/571 Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+[3] Si598/599 Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+Required properties:
+ - compatible: Shall be one of "silabs,si570", "silabs,si571",
+			       "silabs,si598", "silabs,si599"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+ - factory-fout: Factory set default frequency. This frequency is part specific.
+		 The correct frequency for the part used has to be provided in
+		 order to generate the correct output frequencies. For more
+		 details, please refer to the data sheet.
+ - temperature-stability: Temperature stability of the device in PPM. Should be
+			  one of: 7, 20, 50 or 100.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si570".
+ - clock-frequency: Output frequency to generate. This defines the output
+		    frequency set during boot. It can be reprogrammed during
+		    runtime through the common clock framework.
+
+Example:
+	si570: clock-generator@5d {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x5d>;
+		factory-fout = <156250000>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 91a748fed13..c2cb7621ad2 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -7,8 +7,10 @@ This binding uses the common clock binding[1].
 Required properties:
 - compatible : shall be one of the following:
 	"allwinner,sun4i-osc-clk" - for a gatable oscillator
-	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+	"allwinner,sun4i-pll5-clk" - for the PLL5 clock
+	"allwinner,sun4i-pll6-clk" - for the PLL6 clock
 	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-axi-clk" - for the AXI clock
 	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
@@ -33,10 +35,14 @@ Required properties:
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+	"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
-- clocks : shall be the input parent clock(s) phandle for the clock
+- clocks : shall be the input parent clock(s) phandle for the clock. For
+	multiplexed clocks, the list order must match the hardware
+	programming order.
 - #clock-cells : from common clock binding; shall be set to 0 except for
 	"allwinner,*-gates-clk" where it shall be set to 1
 
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
index d99af878f5d..17b4a94916d 100644
--- a/Documentation/devicetree/bindings/clock/zynq-7000.txt
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -22,6 +22,10 @@ Required properties:
 Optional properties:
  - clocks : as described in the clock bindings
  - clock-names : as described in the clock bindings
+ - fclk-enable : Bit mask to enable FCLKs statically at boot time.
+		 Bit [0..3] correspond to FCLK0..FCLK3. The corresponding
+		 FCLK will only be enabled if it is actually running at
+		 boot time.
 
 Clock inputs:
 The following strings are optional parameters to the 'clock-names' property in
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index c6a3469d343..678f3cf0b8f 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
 client while probing.This document describes the binding for mfd device and
 PMIC submodule.
 
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max77686.txt file.
+
 Required properties:
 - compatible : Must be "maxim,max77686";
 - reg : Specifies the i2c slave address of PMIC block.