Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "This branch contains part 1 of the platform updates for 3.10.  Among
  the highlights:

   - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
   - New support for CSR SiRFatlas6 SoCs
   - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
   - A bunch of updates for the shmobile platforms
   - A handful of updates for davinci
   - A few updates for Qualcomm MSM
   - Plus a handful of other patches, defconfig updates, etc."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
  ARM: tegra: pm: fix build error w/o PM_SLEEP
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support
  ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
  ARM: socfpga: Add clock entries into device tree
  ARM: socfpga: Enable soft reset
  ARM: EXYNOS: replace cpumask by the corresponding macro
  ARM: EXYNOS: handle properly the return values
  ARM: EXYNOS: factor out the idle states
  ARM: OMAP4: Enable fix for Cortex-A9 erratas
  ARM: OMAP2+: Export SoC information to userspace
  ARM: OMAP2+: SoC name and revision unification
  ARM: OMAP2+: Move common part of late init into common function
  ARM: tegra: pm: remove duplicated include from pm.c
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: SAMSUNG: check processor type before cache restoration in resume
  ...

7 files changed, 173 insertions, 22 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt
new file mode 100644
index 00000000000..2c28f1d12f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt
@@ -0,0 +1,11 @@
+Altera SOCFPGA Clock Manager
+
+Required properties:
+- compatible : "altr,clk-mgr"
+- reg : Should contain base address and length for Clock Manager
+
+Example:
+	 clkmgr@ffd04000 {
+		compatible = "altr,clk-mgr";
+		reg = <0xffd04000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
new file mode 100644
index 00000000000..59fa6e68d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
@@ -0,0 +1,19 @@
+Broadcom Kona Family timer
+-----------------------------------------------------
+This timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+- compatible : "bcm,kona-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+- clock-frequency: frequency that the clock operates
+
+Example:
+	timer@35006000 {
+		compatible = "bcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <0x0 7 0x4>;
+		clock-frequency = <32768>;
+	};
+
diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index 8c5907b9cae..c6ef8f13dc7 100644
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -3,36 +3,35 @@
 Properties:
 
 - compatible : Should at least contain "qcom,msm-timer". More specific
-  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
-  purpose timer and a debug timer respectively.
+               properties specify which subsystem the timers are paired with.
 
-- interrupts : Interrupt indicating a match event.
+               "qcom,kpss-timer" - krait subsystem
+               "qcom,scss-timer" - scorpion subsystem
 
-- reg : Specifies the base address of the timer registers. The second region
-  specifies an optional register used to configure the clock divider.
+- interrupts : Interrupts for the the debug timer, the first general purpose
+               timer, and optionally a second general purpose timer in that
+               order.
 
-- clock-frequency : The frequency of the timer in Hz.
+- reg : Specifies the base address of the timer registers.
+
+- clock-frequency : The frequency of the debug timer and the general purpose
+                    timer(s) in Hz in that order.
 
 Optional:
 
 - cpu-offset : per-cpu offset used when the timer is accessed without the
-  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+               CPU remapping facilities. The offset is
+               cpu-offset + (0x10000 * cpu-nr).
 
 Example:
 
-       timer@200a004 {
-               compatible = "qcom,msm-gpt", "qcom,msm-timer";
-               interrupts = <1 2 0x301>;
-               reg = <0x0200a004 0x10>;
-               clock-frequency = <32768>;
-               cpu-offset = <0x40000>;
-       };
-
-       timer@200a024 {
-               compatible = "qcom,msm-dgt", "qcom,msm-timer";
-               interrupts = <1 3 0x301>;
-               reg = <0x0200a024 0x10>,
-                     <0x0200a034 0x4>;
-               clock-frequency = <6750000>;
+       timer@200a000 {
+               compatible = "qcom,scss-timer", "qcom,msm-timer";
+               interrupts = <1 1 0x301>,
+                            <1 2 0x301>,
+                            <1 3 0x301>;
+               reg = <0x0200a000 0x100>;
+               clock-frequency = <19200000>,
+                                 <32768>;
                cpu-offset = <0x40000>;
        };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index b5846e21cc2..1608a54e90e 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -1,19 +1,84 @@
 NVIDIA Tegra Power Management Controller (PMC)
 
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
 - name : Should be pmc
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pclk" (The Tegra clock of that name),
+  "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
 - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
   The PMU is an external Power Management Unit, whose interrupt output
   signal is fed into the PMC. This signal is optionally inverted, and then
   fed into the ARM GIC. The PMC is not involved in the detection or
   handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+  Valid values are 0, 1 and 2:
+  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+  1 (LP1): CPU voltage off and DRAM in self-refresh
+  2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+			   is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+			      Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+  The LP0 vector contains the warm boot code that is executed by AVP when
+  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+  processor and always being the first boot processor when chip is power on
+  or resume from deep sleep mode. When the system is resumed from the deep
+  sleep mode, the warm boot code will restore some PLLs, clocks and then
+  bring up CPU0 for resuming the system.
 
 Example:
 
+/ SoC dts including file
 pmc@7000f400 {
 	compatible = "nvidia,tegra20-pmc";
 	reg = <0x7000e400 0x400>;
+	clocks = <&tegra_car 110>, <&clk32k_in>;
+	clock-names = "pclk", "clk32k_in";
 	nvidia,invert-interrupt;
+	nvidia,suspend-mode = <1>;
+	nvidia,cpu-pwr-good-time = <2000>;
+	nvidia,cpu-pwr-off-time = <100>;
+	nvidia,core-pwr-good-time = <3845 3845>;
+	nvidia,core-pwr-off-time = <458>;
+	nvidia,core-power-req-active-high;
+	nvidia,sys-clock-req-active-high;
+	nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+	...
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+	...
 };
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
new file mode 100644
index 00000000000..bd0c8416a5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -0,0 +1,18 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"altr,socfpga-pll-clock" - for a PLL clock
+	"altr,socfpga-perip-clock" - The peripheral clock divided from the
+		PLL clock.
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.
diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
new file mode 100644
index 00000000000..e5a0140b238
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+	as described in the generic DMA client binding. A tx and rx
+	specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+	1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+	compatible = "ti,da830-mmc",
+	reg = <0x40000 0x1000>;
+	interrupts = <16>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "rx", "tx";
+};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8c01a0218a1..9653cf2f972 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -45,6 +45,7 @@ parameter is applicable:
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
 	CLK	Common clock infrastructure is enabled.
+	CMA	Contiguous Memory Area support is enabled.
 	DRM	Direct Rendering Management support is enabled.
 	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
@@ -2724,6 +2725,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
+	rproc_mem=nn[KMG][@address]
+			[KNL,ARM,CMA] Remoteproc physical memory block.
+			Memory area to be used by remote processor image,
+			managed by CMA.
+
 	rw		[KNL] Mount root device read-write on boot
 
 	S		[KNL] Run init in single mode