Merge commit 'v2.6.39-rc7' into sched/core

19 files changed, 582 insertions, 67 deletions

diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 5d259c632cd..fea63b45471 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -294,6 +294,7 @@
 <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
+<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
diff --git a/Documentation/DocBook/v4l/media-ioc-setup-link.xml b/Documentation/DocBook/v4l/media-ioc-setup-link.xml
index 2331e76ded1..cec97af4dab 100644
--- a/Documentation/DocBook/v4l/media-ioc-setup-link.xml
+++ b/Documentation/DocBook/v4l/media-ioc-setup-link.xml
@@ -34,7 +34,7 @@
       <varlistentry>
 	<term><parameter>request</parameter></term>
 	<listitem>
-	  <para>MEDIA_IOC_ENUM_LINKS</para>
+	  <para>MEDIA_IOC_SETUP_LINK</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
diff --git a/Documentation/DocBook/v4l/pixfmt-y12.xml b/Documentation/DocBook/v4l/pixfmt-y12.xml
new file mode 100644
index 00000000000..ff417b858cc
--- /dev/null
+++ b/Documentation/DocBook/v4l/pixfmt-y12.xml
@@ -0,0 +1,79 @@
+<refentry id="V4L2-PIX-FMT-Y12">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y12</constant></refname>
+    <refpurpose>Grey-scale image</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels
+are stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y12</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="none">
+	    <tgroup cols="9" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>Y'<subscript>00low</subscript></entry>
+		  <entry>Y'<subscript>00high</subscript></entry>
+		  <entry>Y'<subscript>01low</subscript></entry>
+		  <entry>Y'<subscript>01high</subscript></entry>
+		  <entry>Y'<subscript>02low</subscript></entry>
+		  <entry>Y'<subscript>02high</subscript></entry>
+		  <entry>Y'<subscript>03low</subscript></entry>
+		  <entry>Y'<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>Y'<subscript>10low</subscript></entry>
+		  <entry>Y'<subscript>10high</subscript></entry>
+		  <entry>Y'<subscript>11low</subscript></entry>
+		  <entry>Y'<subscript>11high</subscript></entry>
+		  <entry>Y'<subscript>12low</subscript></entry>
+		  <entry>Y'<subscript>12high</subscript></entry>
+		  <entry>Y'<subscript>13low</subscript></entry>
+		  <entry>Y'<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>Y'<subscript>20low</subscript></entry>
+		  <entry>Y'<subscript>20high</subscript></entry>
+		  <entry>Y'<subscript>21low</subscript></entry>
+		  <entry>Y'<subscript>21high</subscript></entry>
+		  <entry>Y'<subscript>22low</subscript></entry>
+		  <entry>Y'<subscript>22high</subscript></entry>
+		  <entry>Y'<subscript>23low</subscript></entry>
+		  <entry>Y'<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>Y'<subscript>30low</subscript></entry>
+		  <entry>Y'<subscript>30high</subscript></entry>
+		  <entry>Y'<subscript>31low</subscript></entry>
+		  <entry>Y'<subscript>31high</subscript></entry>
+		  <entry>Y'<subscript>32low</subscript></entry>
+		  <entry>Y'<subscript>32high</subscript></entry>
+		  <entry>Y'<subscript>33low</subscript></entry>
+		  <entry>Y'<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index c6fdcbbd1b4..40af4beb48b 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -696,6 +696,7 @@ information.</para>
     &sub-packed-yuv;
     &sub-grey;
     &sub-y10;
+    &sub-y12;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;
diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml
index 7041127d6df..d7ccd25edcc 100644
--- a/Documentation/DocBook/v4l/subdev-formats.xml
+++ b/Documentation/DocBook/v4l/subdev-formats.xml
@@ -456,6 +456,23 @@
 	      <entry>b<subscript>1</subscript></entry>
 	      <entry>b<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SGBRG8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry>
+	      <entry>0x3013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SGRBG8-1X8">
 	      <entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry>
 	      <entry>0x3002</entry>
@@ -473,6 +490,23 @@
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SRGGB8-1X8">
+	      <entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry>
+	      <entry>0x3014</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
 	      <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
 	      <entry>0x300b</entry>
@@ -2159,6 +2193,31 @@
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-Y12-1X12">
+	      <entry>V4L2_MBUS_FMT_Y12_1X12</entry>
+	      <entry>0x2013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>11</subscript></entry>
+	      <entry>y<subscript>10</subscript></entry>
+	      <entry>y<subscript>9</subscript></entry>
+	      <entry>y<subscript>8</subscript></entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-UYVY8-1X16">
 	      <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
 	      <entry>0x200f</entry>
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index b6ed61c9585..7c163477fcd 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -52,8 +52,10 @@ Brief summary of control files.
  tasks				 # attach a task(thread) and show list of threads
  cgroup.procs			 # show list of processes
  cgroup.event_control		 # an interface for event_fd()
- memory.usage_in_bytes		 # show current memory(RSS+Cache) usage.
- memory.memsw.usage_in_bytes	 # show current memory+Swap usage
+ memory.usage_in_bytes		 # show current res_counter usage for memory
+				 (See 5.5 for details)
+ memory.memsw.usage_in_bytes	 # show current res_counter usage for memory+Swap
+				 (See 5.5 for details)
  memory.limit_in_bytes		 # set/show limit of memory usage
  memory.memsw.limit_in_bytes	 # set/show limit of memory+Swap usage
  memory.failcnt			 # show the number of memory usage hits limits
@@ -453,6 +455,15 @@ memory under it will be reclaimed.
 You can reset failcnt by writing 0 to failcnt file.
 # echo 0 > .../memory.failcnt
 
+5.5 usage_in_bytes
+
+For efficiency, as other kernel components, memory cgroup uses some optimization
+to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
+method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz
+value for efficient access. (Of course, when necessary, it's synchronized.)
+If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
+value in memory.stat(see 5.2).
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index cb8a3a00cc9..df904aec990 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 
diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021
index 03d02bfb3df..02ad96cf9b2 100644
--- a/Documentation/hwmon/adm1021
+++ b/Documentation/hwmon/adm1021
@@ -14,10 +14,6 @@ Supported chips:
     Prefix: 'gl523sm'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
     Datasheet:
-  * Intel Xeon Processor
-    Prefix: - any other - may require 'force_adm1021' parameter
-    Addresses scanned: none
-    Datasheet: Publicly available at Intel website
   * Maxim MAX1617
     Prefix: 'max1617'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
@@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make
 ADM1021-clones do faster measurements, but there is really no good reason
 for that.
 
-Xeon support
-------------
 
-Some Xeon processors have real max1617, adm1021, or compatible chips
-within them, with two temperature sensors.
+Netburst-based Xeon support
+---------------------------
 
-Other Xeons have chips with only one sensor.
+Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
+2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
+within them, with two temperature sensors. Other Xeon processors of this
+era (with 400 MHz FSB) had chips with only one temperature sensor.
 
-If you have a Xeon, and the adm1021 module loads, and both temperatures
-appear valid, then things are good.
+If you have such an old Xeon, and you get two valid temperatures when
+loading the adm1021 module, then things are good.
 
-If the adm1021 module doesn't load, you should try this:
-	modprobe adm1021 force_adm1021=BUS,ADDRESS
-	ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
+If nothing happens when loading the adm1021 module, and you are certain
+that your specific Xeon processor model includes compatible sensors, you
+will have to explicitly instantiate the sensor chips from user-space. See
+method 4 in Documentation/i2c/instantiating-devices. Possible slave
+addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
+only temp2 will be correct and temp1 will have to be ignored.
 
-If you have dual Xeons you may have appear to have two separate
-adm1021-compatible chips, or two single-temperature sensors, at distinct
-addresses.
+Previous generations of the Xeon processor (based on Pentium II/III)
+didn't have these sensors. Next generations of Xeon processors (533 MHz
+FSB and faster) lost them, until the Core-based generation which
+introduced integrated digital thermal sensors. These are supported by
+the coretemp driver.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index fa475c0a48a..f3efd18e87f 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -32,6 +32,16 @@ Supported chips:
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the ON Semiconductor website
                http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+  * Analog Devices ADT7461A
+    Prefix: 'adt7461a'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+  * ON Semiconductor NCT1008
+    Prefix: 'nct1008'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
   * Maxim MAX6646
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4d
@@ -149,7 +159,7 @@ ADM1032:
   * ALERT is triggered by open remote sensor.
   * SMBus PEC support for Write Byte and Receive Byte transactions.
 
-ADT7461:
+ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
@@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked.
 Only the local hysteresis can be set from user-space, and the same delta
 applies to the remote hysteresis.
 
-The lm90 driver will not update its values more frequently than every
-other second; reading them more often will do no harm, but will return
-'old' values.
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
 
 SMBus Alert Support
 -------------------
@@ -205,11 +215,12 @@ SMBus Alert Support
 This driver has basic support for SMBus alert. When an alert is received,
 the status register is read and the faulty temperature channel is logged.
 
-The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
-alert protocol properly so additional care is needed: the ALERT output is
-disabled when an alert is received, and is re-enabled only when the alarm
-is gone. Otherwise the chip would block alerts from other chips in the bus
-as long as the alarm is active.
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
 
 PEC Support
 -----------
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
new file mode 100644
index 00000000000..41728999e14
--- /dev/null
+++ b/Documentation/hwmon/max16064
@@ -0,0 +1,62 @@
+Kernel driver max16064
+======================
+
+Supported chips:
+  * Maxim MAX16064
+    Prefix: 'max16064'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
+Controller with Active-Voltage Output Control and PMBus Interface.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-4]_label		"vout[1-4]"
+in[1-4]_input		Measured voltage. From READ_VOUT register.
+in[1-4]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-4]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-4]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-4]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
new file mode 100644
index 00000000000..6c525dd07d5
--- /dev/null
+++ b/Documentation/hwmon/max34440
@@ -0,0 +1,79 @@
+Kernel driver max34440
+======================
+
+Supported chips:
+  * Maxim MAX34440
+    Prefixes: 'max34440'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
+  * Maxim MAX34441
+    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
+    Prefixes: 'max34441'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
+Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-6]_label		"vout[1-6]".
+in[1-6]_input		Measured voltage. From READ_VOUT register.
+in[1-6]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-6]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-6]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-6]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-6]_label		"iout[1-6]".
+curr[1-6]_input		Measured current. From READ_IOUT register.
+curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
+curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+			in6 and curr6 attributes only exist for MAX34440.
+
+temp[1-8]_input		Measured temperatures. From READ_TEMPERATURE_1 register.
+			temp1 is the chip's internal temperature. temp2..temp5
+			are remote I2C temperature sensors. For MAX34441, temp6
+			is a remote thermal-diode sensor. For MAX34440, temp6..8
+			are remote I2C temperature sensors.
+temp[1-8]_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-8]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-8]_max_alarm	Temperature high alarm.
+temp[1-8]_crit_alarm	Temperature critical high alarm.
+
+			temp7 and temp8 attributes only exist for MAX34440.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
new file mode 100644
index 00000000000..0ddd3a41203
--- /dev/null
+++ b/Documentation/hwmon/max8688
@@ -0,0 +1,69 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+  * Maxim MAX8688
+    Prefix: 'max8688'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label		"vout1"
+in1_input		Measured voltage. From READ_VOUT register.
+in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm		Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in1_crit_alarm		Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label		"iout1"
+curr1_input		Measured current. From READ_IOUT register.
+curr1_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr1_max_alarm		Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index dc4933e9634..5e462fc7f99 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -13,26 +13,6 @@ Supported chips:
     Prefix: 'ltc2978'
     Addresses scanned: -
     Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
-  * Maxim MAX16064
-    Quad Power-Supply Controller
-    Prefix: 'max16064'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
-  * Maxim MAX34440
-    PMBus 6-Channel Power-Supply Manager
-    Prefixes: 'max34440'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
-  * Maxim MAX34441
-    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
-    Prefixes: 'max34441'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
-  * Maxim MAX8688
-    Digital Power-Supply Controller/Monitor
-    Prefix: 'max8688'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -
@@ -175,11 +155,13 @@ currX_crit		Critical maximum current.
 			From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
 currX_alarm		Current high alarm.
 			From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm		Current high alarm.
+			From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
 currX_lcrit_alarm	Output current critical low alarm.
 			From IOUT_UC_FAULT status.
 currX_crit_alarm	Current critical high alarm.
 			From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label		"iin" or "vinY"
+currX_label		"iin" or "ioutY"
 
 powerX_input		Measured power. From READ_PIN or READ_POUT register.
 powerX_cap		Output power cap. From POUT_MAX register.
@@ -193,13 +175,13 @@ powerX_crit_alarm	Output power critical high alarm.
 			From POUT_OP_FAULT status.
 powerX_label		"pin" or "poutY"
 
-tempX_input		Measured tempererature.
+tempX_input		Measured temperature.
 			From READ_TEMPERATURE_X register.
-tempX_min		Mimimum tempererature. From UT_WARN_LIMIT register.
-tempX_max		Maximum tempererature. From OT_WARN_LIMIT register.
-tempX_lcrit		Critical low tempererature.
+tempX_min		Mimimum temperature. From UT_WARN_LIMIT register.
+tempX_max		Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit		Critical low temperature.
 			From UT_FAULT_LIMIT register.
-tempX_crit		Critical high tempererature.
+tempX_crit		Critical high temperature.
 			From OT_FAULT_LIMIT register.
 tempX_min_alarm		Chip temperature low alarm. Set by comparing
 			READ_TEMPERATURE_X with UT_WARN_LIMIT if
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
index 3820fc9ca52..59e31614054 100644
--- a/Documentation/hwmon/smm665
+++ b/Documentation/hwmon/smm665
@@ -150,8 +150,8 @@ in8_crit_alarm		Channel F critical alarm
 in9_crit_alarm		AIN1 critical alarm
 in10_crit_alarm		AIN2 critical alarm
 
-temp1_input		Chip tempererature
-temp1_min		Mimimum chip tempererature
-temp1_max		Maximum chip tempererature
-temp1_crit		Critical chip tempererature
+temp1_input		Chip temperature
+temp1_min		Mimimum chip temperature
+temp1_max		Maximum chip temperature
+temp1_crit		Critical chip temperature
 temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
new file mode 100644
index 00000000000..86f42e8e9e4
--- /dev/null
+++ b/Documentation/hwmon/submitting-patches
@@ -0,0 +1,109 @@
+	How to Get Your Patch Accepted Into the Hwmon Subsystem
+	-------------------------------------------------------
+
+This text is is a collection of suggestions for people writing patches or
+drivers for the hwmon subsystem. Following these suggestions will greatly
+increase the chances of your change being accepted.
+
+
+1. General
+----------
+
+* It should be unnecessary to mention, but please read and follow
+    Documentation/SubmitChecklist
+    Documentation/SubmittingDrivers
+    Documentation/SubmittingPatches
+    Documentation/CodingStyle
+
+* If your patch generates checkpatch warnings, please refrain from explanations
+  such as "I don't like that coding style". Keep in mind that each unnecessary
+  warning helps hiding a real problem. If you don't like the kernel coding
+  style, don't write kernel drivers.
+
+* Please test your patch thoroughly. We are not your test group.
+  Sometimes a patch can not or not completely be tested because of missing
+  hardware. In such cases, you should test-build the code on at least one
+  architecture. If run-time testing was not achieved, it should be written
+  explicitly below the patch header.
+
+* If your patch (or the driver) is affected by configuration options such as
+  CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
+  variants.
+
+
+2. Adding functionality to existing drivers
+-------------------------------------------
+
+* Make sure the documentation in Documentation/hwmon/<driver_name> is up to
+  date.
+
+* Make sure the information in Kconfig is up to date.
+
+* If the added functionality requires some cleanup or structural changes, split
+  your patch into a cleanup part and the actual addition. This makes it easier
+  to review your changes, and to bisect any resulting problems.
+
+* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
+
+
+3. New drivers
+--------------
+
+* Running your patch or driver file(s) through checkpatch does not mean its
+  formatting is clean. If unsure about formatting in your new driver, run it
+  through Lindent. Lindent is not perfect, and you may have to do some minor
+  cleanup, but it is a good start.
+
+* Consider adding yourself to MAINTAINERS.
+
+* Document the driver in Documentation/hwmon/<driver_name>.
+
+* Add the driver to Kconfig and Makefile in alphabetical order.
+
+* Make sure that all dependencies are listed in Kconfig. For new drivers, it
+  is most likely prudent to add a dependency on EXPERIMENTAL.
+
+* Avoid forward declarations if you can. Rearrange the code if necessary.
+
+* Avoid calculations in macros and macro-generated functions. While such macros
+  may save a line or so in the source, it obfuscates the code and makes code
+  review more difficult. It may also result in code which is more complicated
+  than necessary. Use inline functions or just regular functions instead.
+
+* If the driver has a detect function, make sure it is silent. Debug messages
+  and messages printed after a successful detection are acceptable, but it
+  must not print messages such as "Chip XXX not found/supported".
+
+  Keep in mind that the detect function will run for all drivers supporting an
+  address if a chip is detected on that address. Unnecessary messages will just
+  pollute the kernel log and not provide any value.
+
+* Provide a detect function if and only if a chip can be detected reliably.
+
+* Avoid writing to chip registers in the detect function. If you have to write,
+  only do it after you have already gathered enough data to be certain that the
+  detection is going to be successful.
+
+  Keep in mind that the chip might not be what your driver believes it is, and
+  writing to it might cause a bad misconfiguration.
+
+* Make sure there are no race conditions in the probe function. Specifically,
+  completely initialize your chip first, then create sysfs entries and register
+  with the hwmon subsystem.
+
+* Do not provide support for deprecated sysfs attributes.
+
+* Do not create non-standard attributes unless really needed. If you have to use
+  non-standard attributes, or you believe you do, discuss it on the mailing list
+  first. Either case, provide a detailed explanation why you need the
+  non-standard attribute(s).
+  Standard attributes are specified in Documentation/hwmon/sysfs-interface.
+
+* When deciding which sysfs attributes to support, look at the chip's
+  capabilities. While we do not expect your driver to support everything the
+  chip may offer, it should at least support all limits and alarms.
+
+* Last but not least, please check if a driver for your chip already exists
+  before starting to write a new driver. Especially for temperature sensors,
+  new chips are often variants of previously released chips. In some cases,
+  a presumably new chip may simply have been relabeled.
diff --git a/Documentation/md.txt b/Documentation/md.txt
index a81c7b4790f..2366b1c8cf1 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -552,6 +552,16 @@ also have
      within the array where IO will be blocked.  This is currently
      only supported for raid4/5/6.
 
+   sync_min
+   sync_max
+     The two values, given as numbers of sectors, indicate a range
+     withing the array where 'check'/'repair' will operate. Must be
+     a multiple of chunk_size. When it reaches "sync_max" it will
+     pause, rather than complete.
+     You can use 'select' or 'poll' on "sync_completed" to wait for
+     that number to reach sync_max.  Then you can either increase
+     "sync_max", or can write 'idle' to "sync_action".
+
 
 Each active md device may also have attributes specific to the
 personality module that manages it.
diff --git a/Documentation/sound/alsa/SB-Live-mixer.txt b/Documentation/sound/alsa/SB-Live-mixer.txt
index f5639d40521..f4b5988f450 100644
--- a/Documentation/sound/alsa/SB-Live-mixer.txt
+++ b/Documentation/sound/alsa/SB-Live-mixer.txt
@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
 The result is forwarded to the ADC capture FIFO (thus to the standard capture
 PCM device).
 
-name='Music Playback Volume',index=0
+name='Synth Playback Volume',index=0
 
 This control is used to attenuate samples for left and right MIDI FX-bus
 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
 
-name='Music Capture Volume',index=0
-name='Music Capture Switch',index=0
+name='Synth Capture Volume',index=0
+name='Synth Capture Switch',index=0
 
 These controls are used to attenuate samples for left and right MIDI FX-bus
 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt
index cb47e723af7..1e96ce6e2d2 100644
--- a/Documentation/video4linux/sh_mobile_ceu_camera.txt
+++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt
@@ -37,7 +37,7 @@ Generic scaling / cropping scheme
 -1'-
 
 In the above chart minuses and slashes represent "real" data amounts, points and
-accents represent "useful" data, basically, CEU scaled amd cropped output,
+accents represent "useful" data, basically, CEU scaled and cropped output,
 mapped back onto the client's source plane.
 
 Such a configuration can be produced by user requests:
@@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal.
 
 1. Calculate current sensor scales:
 
-	scale_s = ((3') - (3)) / ((2') - (2))
+	scale_s = ((2') - (2)) / ((3') - (3))
 
 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
 current sensor scales onto input window - this is user S_CROP:
@@ -80,7 +80,7 @@ window:
 4. Calculate sensor output window by applying combined scales to real input
 window:
 
-	width_s_out = ((2') - (2)) / scale_comb
+	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
 
 5. Apply iterative sensor S_FMT for sensor output window.
 
diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
index 01c513fac40..a0b577de918 100644
--- a/Documentation/workqueue.txt
+++ b/Documentation/workqueue.txt
@@ -12,6 +12,7 @@ CONTENTS
 4. Application Programming Interface (API)
 5. Example Execution Scenarios
 6. Guidelines
+7. Debugging
 
 
 1. Introduction
@@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set,
 * Unless work items are expected to consume a huge amount of CPU
   cycles, using a bound wq is usually beneficial due to the increased
   level of locality in wq operations and work item execution.
+
+
+7. Debugging
+
+Because the work functions are executed by generic worker threads
+there are a few tricks needed to shed some light on misbehaving
+workqueue users.
+
+Worker threads show up in the process list as:
+
+root      5671  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/0:1]
+root      5672  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/1:2]
+root      5673  0.0  0.0      0     0 ?        S    12:12   0:00 [kworker/0:0]
+root      5674  0.0  0.0      0     0 ?        S    12:13   0:00 [kworker/1:0]
+
+If kworkers are going crazy (using too much cpu), there are two types
+of possible problems:
+
+	1. Something beeing scheduled in rapid succession
+	2. A single work item that consumes lots of cpu cycles
+
+The first one can be tracked using tracing:
+
+	$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
+	$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+	(wait a few secs)
+	^C
+
+If something is busy looping on work queueing, it would be dominating
+the output and the offender can be determined with the work item
+function.
+
+For the second type of problems it should be possible to just check
+the stack trace of the offending worker thread.
+
+	$ cat /proc/THE_OFFENDING_KWORKER/stack
+
+The work item's function should be trivially visible in the stack
+trace.