dynamic_debug: update Documentation/*, Kconfig.debug

In dynamic-debug-howto.txt:

- add section: Debug Messages at Module Initialization Time
- update flags indicators in example outputs to include '='
- make flags descriptions tabular
- add item on '_' flag-char
- add dyndbg, boot-args examples
- rewrap some paragraphs with long lines

In Kconfig.debug, note that compiling with -DDEBUG enables all
pr_debug()s in that code.

In kernel-parameters.txt, add dyndbg and module.dyndbg items,
and deprecate ddebug_query.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 127 insertions, 64 deletions

diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index 74e6c778267..6e1684981da 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -2,17 +2,17 @@
 Introduction
 ============
 
-This document describes how to use the dynamic debug (ddebug) feature.
+This document describes how to use the dynamic debug (dyndbg) feature.
 
-Dynamic debug is designed to allow you to dynamically enable/disable kernel
-code to obtain additional kernel information. Currently, if
-CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can be
-dynamically enabled per-callsite.
+Dynamic debug is designed to allow you to dynamically enable/disable
+kernel code to obtain additional kernel information.  Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can
+be dynamically enabled per-callsite.
 
 Dynamic debug has even more useful features:
 
- * Simple query language allows turning on and off debugging statements by
-   matching any combination of 0 or 1 of:
+ * Simple query language allows turning on and off debugging
+   statements by matching any combination of 0 or 1 of:
 
    - source filename
    - function name
@@ -20,17 +20,19 @@ Dynamic debug has even more useful features:
    - module name
    - format string
 
- * Provides a debugfs control file: <debugfs>/dynamic_debug/control which can be
-   read to display the complete list of known debug statements, to help guide you
+ * Provides a debugfs control file: <debugfs>/dynamic_debug/control
+   which can be read to display the complete list of known debug
+   statements, to help guide you
 
 Controlling dynamic debug Behaviour
 ===================================
 
 The behaviour of pr_debug()/dev_dbg()s are controlled via writing to a
-control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
-filesystem, in order to make use of this feature. Subsequently, we refer to the
-control file as: <debugfs>/dynamic_debug/control. For example, if you want to
-enable printing from source file 'svcsock.c', line 1603 you simply do:
+control file in the 'debugfs' filesystem. Thus, you must first mount
+the debugfs filesystem, in order to make use of this feature.
+Subsequently, we refer to the control file as:
+<debugfs>/dynamic_debug/control. For example, if you want to enable
+printing from source file 'svcsock.c', line 1603 you simply do:
 
 nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
@@ -44,15 +46,15 @@ nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
 Viewing Dynamic Debug Behaviour
 ===========================
 
-You can view the currently configured behaviour of all the debug statements
-via:
+You can view the currently configured behaviour of all the debug
+statements via:
 
 nullarbor:~ # cat <debugfs>/dynamic_debug/control
 # filename:lineno [module]function flags format
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline       : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth         : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests     : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline       : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth         : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests     : %d\012"
 ...
 
 
@@ -65,12 +67,12 @@ nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
 nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
 42
 
-Note in particular that the third column shows the enabled behaviour
-flags for each debug statement callsite (see below for definitions of the
-flags).  The default value, no extra behaviour enabled, is "-".  So
-you can view all the debug statement callsites with any non-default flags:
+The third column shows the currently enabled flags for each debug
+statement callsite (see below for definitions of the flags).  The
+default value, with no flags enabled, is "=_".  So you can view all
+the debug statement callsites with any non-default flags:
 
-nullarbor:~ # awk '$3 != "-"' <debugfs>/dynamic_debug/control
+nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
 # filename:lineno [module]function flags format
 /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
 
@@ -103,15 +105,14 @@ specifications, followed by a flags change specification.
 
 command ::= match-spec* flags-spec
 
-The match-spec's are used to choose a subset of the known dprintk()
+The match-spec's are used to choose a subset of the known pr_debug()
 callsites to which to apply the flags-spec.  Think of them as a query
 with implicit ANDs between each pair.  Note that an empty list of
-match-specs is possible, but is not very useful because it will not
-match any debug statement callsites.
+match-specs will select all debug statement callsites.
 
-A match specification comprises a keyword, which controls the attribute
-of the callsite to be compared, and a value to compare against.  Possible
-keywords are:
+A match specification comprises a keyword, which controls the
+attribute of the callsite to be compared, and a value to compare
+against.  Possible keywords are:
 
 match-spec ::= 'func' string |
 	       'file' string |
@@ -164,15 +165,15 @@ format
     characters (") or single quote characters (').
     Examples:
 
-    format svcrdma:	    // many of the NFS/RDMA server dprintks
-    format readahead	    // some dprintks in the readahead cache
+    format svcrdma:	    // many of the NFS/RDMA server pr_debugs
+    format readahead	    // some pr_debugs in the readahead cache
     format nfsd:\040SETATTR // one way to match a format with whitespace
     format "nfsd: SETATTR"  // a neater way to match a format with whitespace
     format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
 
 line
     The given line number or range of line numbers is compared
-    against the line number of each dprintk() callsite.  A single
+    against the line number of each pr_debug() callsite.  A single
     line number matches the callsite line number exactly.  A
     range of line numbers matches any callsite between the first
     and last line number inclusive.  An empty first number means
@@ -188,51 +189,93 @@ The flags specification comprises a change operation followed
 by one or more flag characters.  The change operation is one
 of the characters:
 
--
-    remove the given flags
-
-+
-    add the given flags
-
-=
-    set the flags to the given flags
+  -    remove the given flags
+  +    add the given flags
+  =    set the flags to the given flags
 
 The flags are:
 
-f
-    Include the function name in the printed message
-l
-    Include line number in the printed message
-m
-    Include module name in the printed message
-p
-    Causes a printk() message to be emitted to dmesg
-t
-    Include thread ID in messages not generated from interrupt context
+  p    enables the pr_debug() callsite.
+  f    Include the function name in the printed message
+  l    Include line number in the printed message
+  m    Include module name in the printed message
+  t    Include thread ID in messages not generated from interrupt context
+  _    No flags are set. (Or'd with others on input)
+
+For display, the flags are preceded by '='
+(mnemonic: what the flags are currently equal to).
 
-Note the regexp ^[-+=][flmpt]+$ matches a flags specification.
-Note also that there is no convenient syntax to remove all
-the flags at once, you need to use "-flmpt".
+Note the regexp ^[-+=][flmpt_]+$ matches a flags specification.
+To clear all flags at once, use "=_" or "-flmpt".
 
 
-Debug messages during boot process
+Debug messages during Boot Process
 ==================================
 
-To be able to activate debug messages during the boot process,
-even before userspace and debugfs exists, use the boot parameter:
-ddebug_query="QUERY"
+To activate debug messages for core code and built-in modules during
+the boot process, even before userspace and debugfs exists, use
+dyndbg="QUERY", module.dyndbg="QUERY", or ddebug_query="QUERY"
+(ddebug_query is obsoleted by dyndbg, and deprecated).  QUERY follows
+the syntax described above, but must not exceed 1023 characters.  Your
+bootloader may impose lower limits.
+
+These dyndbg params are processed just after the ddebug tables are
+processed, as part of the arch_initcall.  Thus you can enable debug
+messages in all code run after this arch_initcall via this boot
+parameter.
 
-QUERY follows the syntax described above, but must not exceed 1023
-characters. The enablement of debug messages is done as an arch_initcall.
-Thus you can enable debug messages in all code processed after this
-arch_initcall via this boot parameter.
 On an x86 system for example ACPI enablement is a subsys_initcall and
-ddebug_query="file ec.c +p"
+   dyndbg="file ec.c +p"
 will show early Embedded Controller transactions during ACPI setup if
 your machine (typically a laptop) has an Embedded Controller.
 PCI (or other devices) initialization also is a hot candidate for using
 this boot parameter for debugging purposes.
 
+If foo module is not built-in, foo.dyndbg will still be processed at
+boot time, without effect, but will be reprocessed when module is
+loaded later.  dyndbg_query= and bare dyndbg= are only processed at
+boot.
+
+
+Debug Messages at Module Initialization Time
+============================================
+
+When "modprobe foo" is called, modprobe scans /proc/cmdline for
+foo.params, strips "foo.", and passes them to the kernel along with
+params given in modprobe args or /etc/modprob.d/*.conf files,
+in the following order:
+
+1. # parameters given via /etc/modprobe.d/*.conf
+   options foo dyndbg=+pt
+   options foo dyndbg # defaults to +p
+
+2. # foo.dyndbg as given in boot args, "foo." is stripped and passed
+   foo.dyndbg=" func bar +p; func buz +mp"
+
+3. # args to modprobe
+   modprobe foo dyndbg==pmf # override previous settings
+
+These dyndbg queries are applied in order, with last having final say.
+This allows boot args to override or modify those from /etc/modprobe.d
+(sensible, since 1 is system wide, 2 is kernel or boot specific), and
+modprobe args to override both.
+
+In the foo.dyndbg="QUERY" form, the query must exclude "module foo".
+"foo" is extracted from the param-name, and applied to each query in
+"QUERY", and only 1 match-spec of each type is allowed.
+
+The dyndbg option is a "fake" module parameter, which means:
+
+- modules do not need to define it explicitly
+- every module gets it tacitly, whether they use pr_debug or not
+- it doesnt appear in /sys/module/$module/parameters/
+  To see it, grep the control file, or inspect /proc/cmdline.
+
+For CONFIG_DYNAMIC_DEBUG kernels, any settings given at boot-time (or
+enabled by -DDEBUG flag during compilation) can be disabled later via
+the sysfs interface if the debug messages are no longer needed:
+
+   echo "module module_name -p" > <debugfs>/dynamic_debug/control
 
 Examples
 ========
@@ -260,3 +303,18 @@ nullarbor:~ # echo -n 'func svc_process -p' >
 // enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
 nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
 				<debugfs>/dynamic_debug/control
+
+// enable all messages
+nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
+
+// add module, function to all enabled messages
+nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
+
+// boot-args example, with newlines and comments for readability
+Kernel command line: ...
+  // see whats going on in dyndbg=value processing
+  dynamic_debug.verbose=1
+  // enable pr_debugs in 2 builtins, #cmt is stripped
+  dyndbg="module params +p #cmt ; module sys +p"
+  // enable pr_debugs in 2 functions in a module loaded later
+  pc87360.dyndbg="func pc87360_init_device +p; func pc87360_find +p"
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1601e5a8b7..d224225616b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -610,7 +610,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
 			time. See Documentation/dynamic-debug-howto.txt for
-			details.
+			details.  Deprecated, see dyndbg.
 
 	debug		[KNL] Enable kernel debugging (events log level).
 
@@ -730,6 +730,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	dscc4.setup=	[NET]
 
+	dyndbg[="val"]		[KNL,DYNAMIC_DEBUG]
+	module.dyndbg[="val"]
+			Enable debug messages at boot time.  See
+			Documentation/dynamic-debug-howto.txt for details.
+
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]