Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
 "This is a branch with updates for Marvell's mvebu/kirkwood platforms.
  They came in late-ish, and were heavily interdependent such that it
  didn't make sense to split them up across the cross-platform topic
  branches.  So here they are (for the second release in a row) in a
  branch on their own."

* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
  arm: l2x0: add aurora related properties to OF binding
  arm: mvebu: add Aurora L2 Cache Controller to the DT
  arm: mvebu: add L2 cache support
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  ...

11 files changed, 345 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
index 70c0dc5f00e..61df564c0d2 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt
@@ -6,9 +6,15 @@ Required properties:
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
+
 - reg: Should contain PMIC registers location and length. First pair
   for the main interrupt registers, second pair for the per-CPU
-  interrupt registers
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+
 
 Example:
 
@@ -18,6 +24,6 @@ Example:
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
-              reg = <0xd0020000 0x1000>,
-                    <0xd0021000 0x1000>;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
         };
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
new file mode 100644
index 00000000000..926b4d6aae7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt
@@ -0,0 +1,20 @@
+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,armada-370-xp-pmsu"
+
+- reg: Should contain PMSU registers location and length. First pair
+  for the per-CPU SW Reset Control registers, second pair for the
+  Power Management Service Unit.
+
+Example:
+
+armada-370-xp-pmsu@d0022000 {
+	compatible = "marvell,armada-370-xp-pmsu";
+	reg = <0xd0022100 0x430>,
+	      <0xd0020800 0x20>;
+};
+
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
index 8b6ea2267c9..64830118b01 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
@@ -5,6 +5,7 @@ Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
 - interrupts: Should contain the list of Global Timer interrupts
 - reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
 
 Optional properties:
 - marvell,timer-25Mhz: Tells whether the Global timer supports the 25
diff --git a/Documentation/devicetree/bindings/arm/coherency-fabric.txt b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
new file mode 100644
index 00000000000..17d8cd10755
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coherency-fabric.txt
@@ -0,0 +1,21 @@
+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,coherency-fabric"
+
+- reg: Should contain coherency fabric registers location and
+  length. First pair for the coherency fabric registers, second pair
+  for the per-CPU fabric registers registers.
+
+Example:
+
+coherency-fabric@d0020200 {
+	compatible = "marvell,coherency-fabric";
+	reg = <0xd0020200 0xb0>,
+		<0xd0021810 0x1c>;
+
+};
+
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 7c3ee3aeb7b..cbef09b5c8a 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -10,6 +10,12 @@ Required properties:
 	"arm,pl310-cache"
 	"arm,l220-cache"
 	"arm,l210-cache"
+	"marvell,aurora-system-cache": Marvell Controller designed to be
+     compatible with the ARM one, with system cache mode (meaning
+     maintenance operations on L1 are broadcasted to the L2 and L2
+     performs the same operation).
+	"marvell,"aurora-outer-cache: Marvell Controller designed to be
+	 compatible with the ARM one with outer cache mode.
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped
@@ -29,6 +35,9 @@ Optional properties:
   filter. Addresses in the filter window are directed to the M1 port. Other
   addresses will go to the M0 port.
 - interrupts : 1 combined interrupt.
+- cache-id-part: cache id part number to be used if it is not present
+  on hardware
+- wt-override: If present then L2 is forced to Write through mode
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 00000000000..1e662948661
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,47 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 00000000000..feb83013071
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,21 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 00000000000..7337005ef5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,119 @@
+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 0
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
new file mode 100644
index 00000000000..7c6cb7fcecd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -0,0 +1,40 @@
+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be "marvell,orion-xor"
+- reg: Should contain registers location and length (two sets)
+    the first set is the low registers, the second set the high
+    registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+And the following optional properties:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+
+Example:
+
+xor@d0060900 {
+	compatible = "marvell,orion-xor";
+	reg = <0xd0060900 0x100
+	       0xd0060b00 0x100>;
+	clocks = <&coreclk 0>;
+	status = "okay";
+
+	xor00 {
+	      interrupts = <51>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	};
+	xor01 {
+	      interrupts = <52>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	      dmacap,memset;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
new file mode 100644
index 00000000000..859a6fa7569
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -0,0 +1,23 @@
+* Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
+
+Required properties:
+- compatible: should be "marvell,armada-370-neta".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+  property, a single integer).
+- phy-mode: The interface between the SoC and the PHY (a string that
+  of_get_phy_mode() can understand)
+- clocks: a pointer to the reference clock for this device.
+
+Example:
+
+ethernet@d0070000 {
+	compatible = "marvell,armada-370-neta";
+	reg = <0xd0070000 0x2500>;
+	interrupts = <8>;
+	clocks = <&gate_clk 4>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
new file mode 100644
index 00000000000..34e7aafa321
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -0,0 +1,35 @@
+* Marvell MDIO Ethernet Controller interface
+
+The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
+MV78xx0, Armada 370 and Armada XP have an identical unit that provides
+an interface with the MDIO bus. This driver handles this MDIO
+interface.
+
+Required properties:
+- compatible: "marvell,orion-mdio"
+- reg: address and length of the SMI register
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+
+Example at the SoC level:
+
+mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "marvell,orion-mdio";
+	reg = <0xd0072004 0x4>;
+};
+
+And at the board level:
+
+mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+}