Fix typos in /Documentation : 'U-Z'

This patch fixes typos in various Documentation txts. The patch addresses some
+words starting with the letters 'U-Z'.

Looks like I made it through the alphabet...just in time to start over again
+too!  Maybe I can fit more profound fixes into the next round...?  Time will
+tell. :)

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

27 files changed, 38 insertions, 38 deletions

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 2ffb0d62f0f..05431621c86 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -489,7 +489,7 @@ size is the size of the area (must be multiples of PAGE_SIZE).
 flags can be or'd together and are
 
 DMA_MEMORY_MAP - request that the memory returned from
-dma_alloc_coherent() be directly writeable.
+dma_alloc_coherent() be directly writable.
 
 DMA_MEMORY_IO - request that the memory returned from
 dma_alloc_coherent() be addressable using read/write/memcpy_toio etc.
diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt
index 5c34910665d..d389388c733 100644
--- a/Documentation/MSI-HOWTO.txt
+++ b/Documentation/MSI-HOWTO.txt
@@ -219,7 +219,7 @@ into the field vector of each element contained in a second argument.
 Note that the pre-assigned IOAPIC dev->irq is valid only if the device
 operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at
 using dev->irq by the device driver to request for interrupt service
-may result unpredictabe behavior.
+may result in unpredictable behavior.
 
 For each MSI-X vector granted, a device driver is responsible for calling
 other functions like request_irq(), enable_irq(), etc. to enable
diff --git a/Documentation/accounting/taskstats.txt b/Documentation/accounting/taskstats.txt
index b55e041c825..ff06b738bb8 100644
--- a/Documentation/accounting/taskstats.txt
+++ b/Documentation/accounting/taskstats.txt
@@ -122,12 +122,12 @@ of atomicity).
 
 However, maintaining per-process, in addition to per-task stats, within the
 kernel has space and time overheads. To address this, the taskstats code
-accumalates each exiting task's statistics into a process-wide data structure.
-When the last task of a process exits, the process level data accumalated also
+accumulates each exiting task's statistics into a process-wide data structure.
+When the last task of a process exits, the process level data accumulated also
 gets sent to userspace (along with the per-task data).
 
 When a user queries to get per-tgid data, the sum of all other live threads in
-the group is added up and added to the accumalated total for previously exited
+the group is added up and added to the accumulated total for previously exited
 threads of the same thread group.
 
 Extending taskstats
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 34bf8f60d8f..980a6e6f598 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -391,7 +391,7 @@ forced such requests to be broken up into small chunks before being passed
 on to the generic block layer, only to be merged by the i/o scheduler
 when the underlying device was capable of handling the i/o in one shot.
 Also, using the buffer head as an i/o structure for i/os that didn't originate
-from the buffer cache unecessarily added to the weight of the descriptors
+from the buffer cache unnecessarily added to the weight of the descriptors
 which were generated for each such chunk.
 
 The following were some of the goals and expectations considered in the
@@ -403,14 +403,14 @@ i.  Should be appropriate as a descriptor for both raw and buffered i/o  -
     for raw i/o.
 ii. Ability to represent high-memory buffers (which do not have a virtual
     address mapping in kernel address space).
-iii.Ability to represent large i/os w/o unecessarily breaking them up (i.e
+iii.Ability to represent large i/os w/o unnecessarily breaking them up (i.e
     greater than PAGE_SIZE chunks in one shot)
 iv. At the same time, ability to retain independent identity of i/os from
     different sources or i/o units requiring individual completion (e.g. for
     latency reasons)
 v.  Ability to represent an i/o involving multiple physical memory segments
     (including non-page aligned page fragments, as specified via readv/writev)
-    without unecessarily breaking it up, if the underlying device is capable of
+    without unnecessarily breaking it up, if the underlying device is capable of
     handling it.
 vi. Preferably should be based on a memory descriptor structure that can be
     passed around different types of subsystems or layers, maybe even
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 531239b2908..2ecd834585e 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -71,7 +71,7 @@ eliminating the need for any additional ioctls.
 The disadvantage is that the driver/hardware has to manage the rest. For
 the application programmer it would be as simple as sending/receiving an
 array to/from the CI ioctls as defined in the Linux DVB API. No changes
-have been made in the API to accomodate this feature.
+have been made in the API to accommodate this feature.
 
 
 * Why the need for another CI interface ?
@@ -102,7 +102,7 @@ This CI interface follows the CI high level interface, which is not
 implemented by most applications. Hence this area is revisited.
 
 This CI interface is quite different in the case that it tries to
-accomodate all other CI based devices, that fall into the other categories
+accommodate all other CI based devices, that fall into the other categories.
 
 This means that this CI interface handles the EN50221 style tags in the
 Application layer only and no session management is taken care of by the
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 6a099edadd6..60e361ba08c 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -62,7 +62,7 @@ res           : root device I/O resource
 bus_base_addr : slot 0 address on this bus
 slots	      : max slot number to probe
 force_probe   : Probe even when slot 0 is empty (no EISA mainboard)
-dma_mask      : Default DMA mask. Usualy the bridge device dma_mask.
+dma_mask      : Default DMA mask. Usually the bridge device dma_mask.
 bus_nr	      : unique bus id, set by eisa_root_register
 
 ** Driver :
diff --git a/Documentation/filesystems/adfs.txt b/Documentation/filesystems/adfs.txt
index 060abb0c700..9e8811f92b8 100644
--- a/Documentation/filesystems/adfs.txt
+++ b/Documentation/filesystems/adfs.txt
@@ -3,7 +3,7 @@ Mount options for ADFS
 
   uid=nnn	All files in the partition will be owned by
 		user id nnn.  Default 0 (root).
-  gid=nnn	All files in the partition willbe in group
+  gid=nnn	All files in the partition will be in group
 		nnn.  Default 0 (root).
   ownmask=nnn	The permission mask for ADFS 'owner' permissions
 		will be nnn.  Default 0700.
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index c3a7afb5eab..b34cdb50eab 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -209,7 +209,7 @@ will happen for write(2).
 
 [struct config_group]
 
-A config_item cannot live in a vaccum.  The only way one can be created
+A config_item cannot live in a vacuum.  The only way one can be created
 is via mkdir(2) on a config_group.  This will trigger creation of a
 child item.
 
@@ -275,7 +275,7 @@ directory is not empty.
 
 [struct configfs_subsystem]
 
-A subsystem must register itself, ususally at module_init time.  This
+A subsystem must register itself, usually at module_init time.  This
 tells configfs to make the subsystem appear in the file tree.
 
 	struct configfs_subsystem {
diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.txt
index 33dc360c8e8..38aba03efc5 100644
--- a/Documentation/filesystems/hpfs.txt
+++ b/Documentation/filesystems/hpfs.txt
@@ -274,7 +274,7 @@ History
      Fixed race-condition in buffer code - it is in all filesystems in Linux;
         when reading device (cat /dev/hda) while creating files on it, files
         could be damaged
-2.02 Woraround for bug in breada in Linux. breada could cause accesses beyond
+2.02 Workaround for bug in breada in Linux. breada could cause accesses beyond
         end of partition
 2.03 Char, block devices and pipes are correctly created
      Fixed non-crashing race in unlink (Alexander Viro)
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 4389c684a80..af6defd10cb 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -30,7 +30,7 @@ Caveats
 Features which OCFS2 does not support yet:
 	- sparse files
 	- extended attributes
-	- shared writeable mmap
+	- shared writable mmap
 	- loopback is supported, but data written will not
 	  be cluster coherent.
 	- quotas
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index bbd2e58d39d..72af5de1eff 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1220,9 +1220,9 @@ applications are using mlock(), or if you are running with no swap then
 you probably should increase the lower_zone_protection setting.
 
 The units of this tunable are fairly vague.  It is approximately equal
-to "megabytes".  So setting lower_zone_protection=100 will protect around 100
+to "megabytes," so setting lower_zone_protection=100 will protect around 100
 megabytes of the lowmem zone from user allocations.  It will also make
-those 100 megabytes unavaliable for use by applications and by
+those 100 megabytes unavailable for use by applications and by
 pagecache, so there is a cost.
 
 The effects of this tunable may be observed by monitoring
diff --git a/Documentation/filesystems/spufs.txt b/Documentation/filesystems/spufs.txt
index 982645a1981..1343d118a9b 100644
--- a/Documentation/filesystems/spufs.txt
+++ b/Documentation/filesystems/spufs.txt
@@ -210,7 +210,7 @@ FILES
    /signal2
        The two signal notification channels of an SPU.  These  are  read-write
        files  that  operate  on  a 32 bit word.  Writing to one of these files
-       triggers an interrupt on the SPU. The  value  writting  to  the  signal
+       triggers an interrupt on the SPU.  The  value  written  to  the  signal
        files can be read from the SPU through a channel read or from host user
        space through the file.  After the value has been read by the  SPU,  it
        is  reset  to zero.  The possible operations on an open signal1 or sig-
diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 0bf38baa2db..786c3a76699 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -390,5 +390,5 @@ mlord@pobox.com
 Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current
 maintainer.
 
-Wed Aug 20 22:31:29 CEST 2003 updated ide boot uptions to current ide.c
+Wed Aug 20 22:31:29 CEST 2003 updated ide boot options to current ide.c
 comments at 2.6.0-test4 time. Maciej Soltysiak <solt@dns.toxicfilms.tv>
diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index 1e7e5853ba4..1b00ad7bb3e 100644
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -103,7 +103,7 @@ LEFT=0x74 & RIGHT=0x75).
 
 5.1 Joystick Event Reporting
 
-In this mode, the ikbd generates a record whever the joystick position is
+In this mode, the ikbd generates a record whenever the joystick position is
 changed (i.e. for each opening or closing of a joystick switch or trigger).
 
 The joystick event record is two bytes of the form:
diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt
index 8ec32cc49eb..62d4af44ec4 100644
--- a/Documentation/ioctl/cdrom.txt
+++ b/Documentation/ioctl/cdrom.txt
@@ -735,7 +735,7 @@ CDROM_DISC_STATUS		Get disc type, etc.
 	    Ok, this is where problems start.  The current interface for
 	    the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
 	    assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
-	    Unfortunatly, while this is often the case, it is also
+	    Unfortunately, while this is often the case, it is also
 	    very common for CDs to have some tracks with data, and some
 	    tracks with audio.	Just because I feel like it, I declare
 	    the following to be the best way to cope.  If the CD has
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index c487186eb2b..9ead3afda84 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -699,7 +699,7 @@ ACPI integration
 Dax Kelson submitted this so that the ACPI acpid daemon will
 kick off the laptop_mode script and run hdparm. The part that
 automatically disables laptop mode when the battery is low was
-writen by Jan Topinski.
+written by Jan Topinski.
 
 -----------------/etc/acpi/events/ac_adapter BEGIN------------------------------
 event=ac_adapter
diff --git a/Documentation/networking/NAPI_HOWTO.txt b/Documentation/networking/NAPI_HOWTO.txt
index c300f26a277..fb6e49cd41f 100644
--- a/Documentation/networking/NAPI_HOWTO.txt
+++ b/Documentation/networking/NAPI_HOWTO.txt
@@ -601,7 +601,7 @@ a)
 	
 5) dev->close() and dev->suspend() issues
 ==========================================
-The driver writter neednt worry about this. The top net layer takes
+The driver writer needn't worry about this; the top net layer takes
 care of it.
 
 6) Adding new Stats to /proc 
@@ -622,9 +622,9 @@ FC should be programmed to apply in the case when the system cant pull out
 packets fast enough i.e send a pause only when you run out of rx buffers.
 Note FC in itself is a good solution but we have found it to not be
 much of a commodity feature (both in NICs and switches) and hence falls
-under the same category as using NIC based mitigation. Also experiments
-indicate that its much harder to resolve the resource allocation
-issue (aka lazy receiving that NAPI offers) and hence quantify its usefullness
+under the same category as using NIC based mitigation. Also, experiments
+indicate that it's much harder to resolve the resource allocation
+issue (aka lazy receiving that NAPI offers) and hence quantify its usefulness
 proved harder. In any case, FC works even better with NAPI but is not
 necessary.
 
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index 4e1cc745ec6..8590a954df1 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -346,7 +346,7 @@ Possible modes:
       depending on the load of the system. If the driver detects that the
       system load is too high, the driver tries to shield the system against 
       too much network load by enabling interrupt moderation. If - at a later
-      time - the CPU utilizaton decreases again (or if the network load is 
+      time - the CPU utilization decreases again (or if the network load is 
       negligible) the interrupt moderation will automatically be disabled.
 
 Interrupt moderation should be used when the driver has to handle one or more
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
index 2f04c9267f8..32d3b916afa 100644
--- a/Documentation/networking/slicecom.txt
+++ b/Documentation/networking/slicecom.txt
@@ -126,7 +126,7 @@ comx0/boardnum	- board number of the SliceCom in the PC (using the 'natural'
 
 Though the options below are to be set on a single interface, they apply to the
 whole board. The restriction, to use them on 'UP' interfaces, is because the 
-command sequence below could lead to unpredicable results.
+command sequence below could lead to unpredictable results.
 
 	# echo 0        >boardnum
 	# echo internal >clock_source
diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt
index 0cf65414763..66b902691fd 100644
--- a/Documentation/networking/wan-router.txt
+++ b/Documentation/networking/wan-router.txt
@@ -412,7 +412,7 @@ beta-2.1.4 Jul 2000		o Dynamic interface configuration:
 
 beta3-2.1.4 Jul 2000		o X25 M_BIT Problem fix.
 				o Added the Multi-Port PPP
-				  Updated utilites for the Multi-Port PPP.
+				  Updated utilities for the Multi-Port PPP.
 
 2.1.4	Aut 2000
 				o In X25API:
@@ -450,7 +450,7 @@ beta1-2.1.5 	Nov 15 2000
 
 
 				o Keyboard Led Monitor/Debugger
-					- A new utilty /usr/sbin/wpkbdmon uses keyboard leds
+					- A new utility /usr/sbin/wpkbdmon uses keyboard leds
 					  to convey operational statistic information of the 
 					  Sangoma WANPIPE cards.
 					NUM_LOCK    = Line State  (On=connected,    Off=disconnected)
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index 9ff966bf76e..28037aa1846 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -184,7 +184,7 @@ static const struct pnp_id pnp_dev_table[] = {
 Please note that the character 'X' can be used as a wild card in the function
 portion (last four characters).
 ex:
-	/* Unkown PnP modems */
+	/* Unknown PnP modems */
 	{	"PNPCXXX",		UNKNOWN_DEV	},
 
 Supported PnP card IDs can optionally be defined.
diff --git a/Documentation/robust-futex-ABI.txt b/Documentation/robust-futex-ABI.txt
index 8529a17ffaa..535f69fab45 100644
--- a/Documentation/robust-futex-ABI.txt
+++ b/Documentation/robust-futex-ABI.txt
@@ -170,7 +170,7 @@ any point:
  1) the 'head' pointer or an subsequent linked list pointer
     is not a valid address of a user space word
  2) the calculated location of the 'lock word' (address plus
-    'offset') is not the valud address of a 32 bit user space
+    'offset') is not the valid address of a 32 bit user space
     word
  3) if the list contains more than 1 million (subject to
     future kernel configuration changes) elements.
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index b168743e78e..745f3cc3b83 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -461,7 +461,7 @@
       This needs the RD-Bit to be disabled on IM_OTHER_SCSI_CMD_CMD which 
       allows data to be written from the system to the device. It is a
       necessary step to be allowed to set blocksize of SCSI-tape-drives and 
-      the tape-speed, whithout confusing the SCSI-Subsystem.
+      the tape-speed, without confusing the SCSI-Subsystem.
    2) The recognition of a tape is included in the check_devices routine.
       This is done by checking for TYPE_TAPE, that is already defined in
       the kernel-scsi-environment. The markup of a tape is done in the 
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 58ad8db333d..caf10b15518 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -115,7 +115,7 @@ SCSI standard documentations are available at SYMBIOS ftp server:
 
           ftp://ftp.symbios.com/
 
-Usefull SCSI tools written by Eric Youngdale are available at tsx-11:
+Useful SCSI tools written by Eric Youngdale are available at tsx-11:
 
           ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsiinfo-X.Y.tar.gz
           ftp://tsx-11.mit.edu/pub/linux/ALPHA/scsi/scsidev-X.Y.tar.gz
diff --git a/Documentation/sound/alsa/Audigy-mixer.txt b/Documentation/sound/alsa/Audigy-mixer.txt
index 5132fd95e07..7f10dc6ff28 100644
--- a/Documentation/sound/alsa/Audigy-mixer.txt
+++ b/Documentation/sound/alsa/Audigy-mixer.txt
@@ -6,7 +6,7 @@ This is based on SB-Live-mixer.txt.
 
 The EMU10K2 chips have a DSP part which can be programmed to support 
 various ways of sample processing, which is described here.
-(This acticle does not deal with the overall functionality of the 
+(This article does not deal with the overall functionality of the 
 EMU10K2 chips. See the manuals section for further details.)
 
 The ALSA driver programs this portion of chip by default code
diff --git a/Documentation/sound/alsa/SB-Live-mixer.txt b/Documentation/sound/alsa/SB-Live-mixer.txt
index 651adaf6047..f5639d40521 100644
--- a/Documentation/sound/alsa/SB-Live-mixer.txt
+++ b/Documentation/sound/alsa/SB-Live-mixer.txt
@@ -5,7 +5,7 @@
 
 The EMU10K1 chips have a DSP part which can be programmed to support
 various ways of sample processing, which is described here.
-(This acticle does not deal with the overall functionality of the 
+(This article does not deal with the overall functionality of the 
 EMU10K1 chips. See the manuals section for further details.)
 
 The ALSA driver programs this portion of chip by default code
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt
index b60590eca18..628013f944c 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/uml/UserModeLinux-HOWTO.txt
@@ -1477,7 +1477,7 @@
 
 
 
-  Making it world-writeable looks bad, but it seems not to be
+  Making it world-writable looks bad, but it seems not to be
   exploitable as a security hole.  However, it does allow anyone to cre-
   ate useless tap devices (useless because they can't configure them),
   which is a DOS attack.  A somewhat more secure alternative would to be